http://wiki.linuxmce.org/api.php?action=feedcontributions&feedformat=atom&user=DougLinuxMCE - User contributions [en]2026-07-21T22:24:12ZUser contributionsMediaWiki 1.44.0http://wiki.linuxmce.org/index.php?title=Hauppauge_WinTV-PVR-350&diff=22258Hauppauge WinTV-PVR-3502010-02-05T07:06:57Z<p>Doug: Adding that the IR receiver is not supported.</p>
<hr />
<div> {| align="right"<br />
| __TOC__<br />
|}<br />
[[Category: Video]]<br />
[[Category: TV Cards]]<br />
<br />
* Manufacturer info: http://www.hauppauge.com/html/wintvpvr350_datasheet.htm<br />
* This card is automatically detected by LinuxMCE using MythTV as the PVR backend, and is easily setup via the [[Setup Wizard]]<br />
*WARNING:<br />
**The Decoder is not currently used by LinuxMCE<br />
**The InfraRed (IR) receiver is NOT supported by LinuxMCE<br />
**This card does NOT work with VDR as the PVR backend<br />
<br />
===WinTV-PVR-350 includes:===<br />
<br />
* 125 channel cable ready TV tuner<br />
* Composite/s-video input to connect to VCR or camcorders<br />
* High quality MPEG1/MPEG2 video and audio encoder<br />
* High quality hardware MPEG-1/MPEG-2 a/v decoder<br />
* dbx-TV stereo decoder (Nicam stereo decoder in Europe) <br />
* IR remote control <br />
<br />
The WinTV-PVR-350's TV tuner and S-Video/composite video inputs are for either PAL or NTSC.<br />
<br />
===MPEG record specifications:===<br />
* MPEG1 recording at 1150K bits/sec (Video CD data rate)<br />
* MPEG2 record datarates:<br />
**2MBit/sec, 4MBit/sec, 6Mbit/sec, 8Mbit/sec, 12Mbit/sec.<br />
**Selections for DVD Standard play (8MBitsec), DVD Long Play (4MBit/sec) and DVD Extra Long Play (2MBit/sec)<br />
* NTSC format* at 29.97fps: Full D1: 720x480, MPEG1: 352x240<br />
* PAL format* at 25fps: Full D1: 720x576, MPEG1: 352x288<br />
* Audio capture formats: 32/44.1/48 KHz, 16bit stereo, 192/224/384Kbits/sec<br />
* Chroma sampling: YUV 4:2:0<br />
* Video file format: .MPG<br />
* MPEG file tested compatible with: MediaStudio 6.0, MyDVD and DVD MovieFactory DVD authoring applications <br />
===MPEG hardware player specifications:===<br />
* Will play MPEG-1 or MPEG-2 video files (.MPG) at up to 12 Mbits/sec<br />
* NTSC output: Full D1: 720x480, MPEG1: 352x240<br />
* PAL output: Full D1: 720x576, MPEG1: 352x288<br />
* Video outputs: S-Video and composite. SCART in Europe<br />
* Audio output: left and right audio connectors (RCA jacks) <br />
===System Requirements:===<br />
* Processor requirements:<br />
* Pentium® II processor 600MHz or faster for TV pause with full screen playback<br />
* Free PCI slot<br />
* Sound card<br />
* DVD or CD-RW writer (optional for burning DVDs or Video CD’s)<br />
* VGA card (PCI or AGP) which supports video overlay (NVidia, S3, ATI, etc.) <br />
<br />
===Troubleshooting===<br />
# Currently the ivtv-firmware packages are not being installed by default along with the other ivtv packages, which means that the card is not initialized properly. The fix is simple: Alt-Ctrl-2 into a session and issue the following commands:<br />
apt-get install ivtv-firmware<br />
rmmod ivtv<br />
modprobe ivtv<br />
This should give you a working card<br />
*This issue has been corrected according to the following: http://mantis.linuxmce.org/view.php?id=3521, If someone can confirm then please remove.</div>Doug