LinuxMCE - User contributions [en]

User:Mami

2008-12-23T15:36:40Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
More detailed info will come!

This is what I have so far:

Core
AMD Athlon64 X2
Nvidia 7xxx
2x DVB-C PCI
3x 160Gb SATA

MD
AMD Athlon64
Nvidia 7xxx
Booted from lan

Orbiter
HP Ipaq hx4700 (WM2003se, Wlan)

HP Procurve Switch
24-port 10/100
Manageability whit vlan

Sharp Aquos 32" LCD TV
HD-Ready
1x HDMI
Support 720p/1080i input signal

Some X10 equipment

Pioneer VSX-D512 5.1 Receiver

User:Mami

2008-12-23T15:36:15Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
More detailed info will come!

This is what I have so far:

Core
AMD Athlon64 X2
Nvidia 7xxx
2x DVB-C PCI
3x 160Gb SATA

MD
AMD Athlon64
Nvidia 7xxx
Booted from lan

Orbiter
HP Ipaq hx4700 (WM2003se)

HP Procurve Switch
24-port 10/100
Manageability whit vlan

Sharp Aquos 32" LCD TV
HD-Ready
1x HDMI
Support 720p/1080i input signal

Some X10 equipment

Pioneer VSX-D512 5.1 Receiver

User:Mami

2008-12-23T15:35:09Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
More detailed info will come!

This is what I have so far:

- One Core
AMD Athlon64 X2
Nvidia 7xxx
2x DVB-C PCI
3x 160Gb SATA

- One MD
AMD Athlon64
Nvidia 7xxx
Booted from lan

- One HP Ipaq hx4700 (WM2003se) as orbiter

- One HP Procurve Switch
24-port 10/100
Manageability whit vlan

- One Sharp Aquos 32" LCD TV
HD-Ready
1x HDMI
Support 720p/1080i input signal

- Some X10 equipment

- Pioneer VSX-D512 5.1 Receiver

User:Mami

2008-12-23T15:31:10Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
More detailed info will come!

This is what I have so far:

- One Core

- One MD

- One HP Ipaq hx4700 (WM2003se) as orbiter

- One HP Procurve Switch
24-port 10/100
Manageability whit vlan

- One Sharp Aquos 32" LCD TV
HD-Ready
1x HDMI
Support 720p/1080i input signal

- Some X10 equipment

- Pioneer VSX-D512 5.1 Receiver

User:Mami

2008-12-23T15:29:57Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
I will add some small info about my system here shortly!

This is what I have so far:

- One Core

- One MD

- One HP Ipaq hx4700 (WM2003se) as orbiter

- One HP Procurve Switch
24-port 10/100
Manageability whit vlan

- One Sharp Aquos 32" LCD TV
HD-Ready
1x HDMI
Support 720p/1080i input signal

- Some X10 equipment

- Pioneer VSX-D512 5.1 Receiver

User:Mami

2008-12-23T15:26:36Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
I will add some small info about my system here shortly!

This is what I have so far:
One Core
One MD
One HP Ipaq hx4700 (WM2003se) as orbiter
One HP Procurve Switch (24-port 10/100, manageability whit vlan)
One Sharp Aquos 32" LCD TV (720p)
Some X10 equipment
Pioneer VSX-D512 5.1 Receiver

User:Mami

2008-12-23T15:24:19Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
I will add some small info about my system here shortly!

I have:
One Core
One MD
One HP Ipaq hx4700 (WM2003se) as orbiter
One HP Procurve Switch (24-port 10/100, manageability whit vlan)
One Sharp Aquos 32" LCD TV (720p)

Category:Finnish Setups

2008-12-23T15:21:20Z

Mami: New page: Category:User Setups

[[Category:User Setups]]

User:Mami

2008-12-23T15:19:14Z

Mami:

[[Category:User Setups]]
[[Category:Finnish Setups]]
I will add some small info about my system here shortly!

User:Mami

2008-12-23T15:18:34Z

Mami: New page: Category:User Setups I will add some small info about my system here shortly!

[[Category:User Setups]]
I will add some small info about my system here shortly!

TwinhanDTV HDTV Mini Cab

2008-08-01T11:48:02Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =
*TwinhanDTV HDTV Mini Cab DVB-C (VP-2021) [http://www.afterdawn.com/hardware/product_details.cfm/227/twinhan_dtv_hdtv_mini_cab]

= Problem =
There is a other TwinhanDTV card whit CI that has the same ID as this one.
You can use this card "as it is", but you can't scan for channels then.
To get this working you need to change some kernel code.

== Solution ==
Download kernel source (via apt-get) + nessesary packages!
apt-get install linux-source-2.6.22 kernel-package libncurses5-dev (all?)
tar jxvf <kernel source>
ln -s <kernel source> linux
cd linux

Edit drivers/media/dvb/bt8xx/dst.c in kernel source
Line 845-852:
{
.device_id = "DCT-CI",
.offset = 1,
.dst_type = DST_TYPE_IS_CABLE,
.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
.dst_feature = DST_TYPE_HAS_CA,
.tuner_type = 0
},

Change:
.dst_feature = DST_TYPE_HAS_CA,
To:
.dst_feature = 0,

Line 1359-1366:
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
!(state->dst_type == DST_TYPE_IS_CABLE) &&
!(state->dst_type == DST_TYPE_IS_ATSC)) {

if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
return -EIO;
}

Change:
!(state->dst_type == DST_TYPE_IS_CABLE) &&
To:
// !(state->dst_type == DST_TYPE_IS_CABLE) &&

Use default kernel .config
cp /boot/config-$(uname -r) .config

Apply config and prepare
make oldconfig && make prepare && make prepare scripts

Build only the driver
make M=drivers/media/dvb/bt8xx/

Copy modules to your default working kernel
cp drivers/media/dvb/bt8xx/*.ko /lib/modules/<version>/kernel/drivers/media/dvb/bt8xx/

Reboot

----

--[[User:Mami|Mami]] 04:45, 1 August 2008 (PDT)

TwinhanDTV HDTV Mini Cab

2008-08-01T11:45:51Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =
*TwinhanDTV HDTV Mini Cab DVB-C (VP-2021) [http://www.afterdawn.com/hardware/product_details.cfm/227/twinhan_dtv_hdtv_mini_cab]

= Problem =
There is a other TwinhanDTV card whit CI that has the same ID as this one.
You can use this card "as it is", but you can't scan for channels then.
To get this working you need to change some kernel code.

== Solution ==
Download kernel source (via apt-get) + nessesary packages!
apt-get install linux-source-2.6.22 kernel-package libncurses5-dev fakeroot (all?)
tar jxvf <kernel source>
ln -s <kernel source> linux
cd linux

Edit drivers/media/dvb/bt8xx/dst.c in kernel source
Line 845-852:
{
.device_id = "DCT-CI",
.offset = 1,
.dst_type = DST_TYPE_IS_CABLE,
.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
.dst_feature = DST_TYPE_HAS_CA,
.tuner_type = 0
},

Change:
.dst_feature = DST_TYPE_HAS_CA,
To:
.dst_feature = 0,

Line 1359-1366:
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
!(state->dst_type == DST_TYPE_IS_CABLE) &&
!(state->dst_type == DST_TYPE_IS_ATSC)) {

if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
return -EIO;
}

Change:
!(state->dst_type == DST_TYPE_IS_CABLE) &&
To:
// !(state->dst_type == DST_TYPE_IS_CABLE) &&

Use default kernel .config
cp /boot/config-$(uname -r) .config

Apply config and prepare
make oldconfig && make prepare && make prepare scripts

Build only the driver
make M=drivers/media/dvb/bt8xx/

Copy modules to your default working kernel
cp drivers/media/dvb/bt8xx/*.ko /lib/modules/<version>/kernel/drivers/media/dvb/bt8xx/

Reboot

----

--[[User:Mami|Mami]] 04:45, 1 August 2008 (PDT)

TwinhanDTV HDTV Mini Cab

2008-07-30T05:41:29Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =
*TwinhanDTV HDTV Mini Cab DVB-C (VP-2021)

= Problem =
There is a other TwinhanDTV card whit CI that has the same ID as this one.
You can use this card "as it is", but you can't scan for channels then.
To get this working you need to change some kernel code.

== Solution ==
Download kernel source (via apt-get) + nessesary packages!
apt-get install linux-source-2.6.22 kernel-package libncurses5-dev fakeroot (all?)
tar jxvf <kernel source>
ln -s <kernel source> linux
cd linux

Edit drivers/media/dvb/bt8xx/dst.c in kernel source
Line 845-852:
{
.device_id = "DCT-CI",
.offset = 1,
.dst_type = DST_TYPE_IS_CABLE,
.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
.dst_feature = DST_TYPE_HAS_CA,
.tuner_type = 0
},

Change:
.dst_feature = DST_TYPE_HAS_CA,
To:
.dst_feature = 0,

Line 1359-1366:
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
!(state->dst_type == DST_TYPE_IS_CABLE) &&
!(state->dst_type == DST_TYPE_IS_ATSC)) {

if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
return -EIO;
}

Change:
!(state->dst_type == DST_TYPE_IS_CABLE) &&
To:
// !(state->dst_type == DST_TYPE_IS_CABLE) &&

Use default kernel .config
cp /boot/config-$(uname -r) .config

Apply config and prepare
make oldconfig && make prepare && make prepare scripts

Build only the driver
make M=drivers/media/dvb/bt8xx/

Copy modules to your default working kernel
cp drivers/media/dvb/bt8xx/*.ko /lib/modules/<version>/kernel/drivers/media/dvb/bt8xx/

Reboot

----

--[[User:Mami|Mami]] 22:27, 29 July 2008 (PDT)

TwinhanDTV HDTV Mini Cab

2008-07-30T05:36:41Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =
*TwinhanDTV HDTV Mini Cab DVB-C

= Problem =
There is a other TwinhanDTV card whit CI that has the same ID as this one.
You can use this card "as it is", but you can't scan for channels then.
To get this working you need to change some kernel code.

== Solution ==
Download kernel source (via apt-get) + nessesary packages!
apt-get install linux-source-2.6.22 kernel-package libncurses5-dev fakeroot (all?)
tar jxvf <kernel source>
ln -s <kernel source> linux
cd linux

Edit drivers/media/dvb/bt8xx/dst.c in kernel source
Line 845-852:
{
.device_id = "DCT-CI",
.offset = 1,
.dst_type = DST_TYPE_IS_CABLE,
.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
.dst_feature = DST_TYPE_HAS_CA,
.tuner_type = 0
},

Change:
.dst_feature = DST_TYPE_HAS_CA,
To:
.dst_feature = 0,

Line 1359-1366:
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
!(state->dst_type == DST_TYPE_IS_CABLE) &&
!(state->dst_type == DST_TYPE_IS_ATSC)) {

if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
return -EIO;
}

Change:
!(state->dst_type == DST_TYPE_IS_CABLE) &&
To:
// !(state->dst_type == DST_TYPE_IS_CABLE) &&

Use default kernel .config
cp /boot/config-$(uname -r) .config

Apply config and prepare
make oldconfig && make prepare && make prepare scripts

Build only the driver
make M=drivers/media/dvb/bt8xx/

Copy modules to your default working kernel
cp drivers/media/dvb/bt8xx/*.ko /lib/modules/<version>/kernel/drivers/media/dvb/bt8xx/

Reboot

----

--[[User:Mami|Mami]] 22:27, 29 July 2008 (PDT)

TwinhanDTV HDTV Mini Cab

2008-07-30T05:35:34Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =
*TwinhanDTV HDTV Mini Cab DVB-C

= Problem =
There is a other TwinhanDTV card whit CI that has the same ID as this one.
You can use this card "as it is", but you can't scan for channels then.
To get this working you need to change some kernel code.

== Solution ==
Download kernel source (via apt-get) + nessesary packages!
apt-get install linux-source-2.6.22 kernel-package libncurses5-dev fakeroot (all?)
tar jxvf <kernel source>
ln -s <kernel source> linux
cd linux

Edit drivers/media/dvb/bt8xx/dst.c in kernel source
Line 845-852:
{
.device_id = "DCT-CI",
.offset = 1,
.dst_type = DST_TYPE_IS_CABLE,
.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
.dst_feature = DST_TYPE_HAS_CA,
.tuner_type = 0
},

Change:
.dst_feature = DST_TYPE_HAS_CA,
To:
.dst_feature = 0,

Line 1359-1366:
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
!(state->dst_type == DST_TYPE_IS_CABLE) &&
!(state->dst_type == DST_TYPE_IS_ATSC)) {

if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
return -EIO;
}

Change:
!(state->dst_type == DST_TYPE_IS_CABLE) &&
To:
// !(state->dst_type == DST_TYPE_IS_CABLE) &&

Use default kernel .config
cp /boot/config-$(uname -r) .config

Apply config and prepare
make oldconfig && make prepare && make prepare scripts

Build only the driver
make M=drivers/media/dvb/bt8xx/

Copy modules to your fedault working kernel
cp drivers/media/dvb/bt8xx/*.ko /lib/modules/<version>/kernel/drivers/media/dvb/bt8xx/

Reboot

----

--[[User:Mami|Mami]] 22:27, 29 July 2008 (PDT)

TwinhanDTV HDTV Mini Cab

2008-07-30T05:30:23Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =
*TwinhanDTV HDTV Mini Cab DVB-C

= Problem =
To get this working in linux you need to change some code in kernel, else the kernel thing it has an onboard CI.

== Solution ==
Download kernel source (via apt-get) + nessesary packages!
apt-get install linux-source-2.6.22 kernel-package libncurses5-dev fakeroot (all?)
tar jxvf <kernel source>
ln -s <kernel source> linux
cd linux

Edit drivers/media/dvb/bt8xx/dst.c in kernel source
Line 845-852:
{
.device_id = "DCT-CI",
.offset = 1,
.dst_type = DST_TYPE_IS_CABLE,
.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
.dst_feature = DST_TYPE_HAS_CA,
.tuner_type = 0
},

Change:
.dst_feature = DST_TYPE_HAS_CA,
To:
.dst_feature = 0,

Line 1359-1366:
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
!(state->dst_type == DST_TYPE_IS_CABLE) &&
!(state->dst_type == DST_TYPE_IS_ATSC)) {

if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
return -EIO;
}

Change:
!(state->dst_type == DST_TYPE_IS_CABLE) &&
To:
// !(state->dst_type == DST_TYPE_IS_CABLE) &&

Use default kernel .config
cp /boot/config-$(uname -r) .config

Apply config and prepare
make oldconfig && make prepare && make prepare scripts

Build only the driver
make M=drivers/media/dvb/bt8xx/

Copy modules to your fedault working kernel
cp drivers/media/dvb/bt8xx/*.ko /lib/modules/<version>/kernel/drivers/media/dvb/bt8xx/

Reboot

----

--[[User:Mami|Mami]] 22:27, 29 July 2008 (PDT)

TwinhanDTV HDTV Mini Cab

2008-07-30T05:27:52Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =
*TwinhanDTV HDTV Mini Cab DVB-C

= Problem =
To get this working in linux you need to change some code in kernel, else the kernel thing it has an onboard CI.

== Solution ==
Download kernel source (via apt-get) + nessesary packages!
apt-get install linux-source-2.6.22 kernel-package libncurses5-dev fakeroot (all?)
tar jxvf <kernel source>
ln -s <kernel source> linux
cd linux
cp /boot/config-$(uname -r) .config
make oldconfig && make prepare
make prepare scripts

Edit drivers/media/dvb/bt8xx/dst.c in kernel source
Line 845-852:
{
.device_id = "DCT-CI",
.offset = 1,
.dst_type = DST_TYPE_IS_CABLE,
.type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
.dst_feature = DST_TYPE_HAS_CA,
.tuner_type = 0
},

Change:
.dst_feature = DST_TYPE_HAS_CA,
To:
.dst_feature = 0,

Line 1359-1366:
if ((state->type_flags & DST_TYPE_HAS_VLF) &&
!(state->dst_type == DST_TYPE_IS_CABLE) &&
!(state->dst_type == DST_TYPE_IS_ATSC)) {

if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
return -EIO;
}

Change:
!(state->dst_type == DST_TYPE_IS_CABLE) &&
To:
// !(state->dst_type == DST_TYPE_IS_CABLE) &&

Use default kernel .config
cp /boot/config-<version> .config

Apply config and prepare
make oldconfig && make prepare

Build only the driver
make M=drivers/media/dvb/bt8xx/

Copy modules to your fedault working kernel
cp drivers/media/dvb/bt8xx/*.ko /lib/modules/<version>/kernel/drivers/media/dvb/bt8xx/

Reboot

----

--[[User:Mami|Mami]] 22:27, 29 July 2008 (PDT)

Technotrend Budget x-1500

2008-07-30T05:01:56Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

= Cards =

*TT-budget C-1500
*TT-budget S-1500

= Driver bug =

To get this card working in LMCE you need to disable the "snd_aw2" (Audiowerk sound card) module.
The driver contains a bug, so it will be loaded for every saa7146 chip.

== Solution ==

Edit /etc/modprobe.d/blacklist and add "blacklist snd_aw2" to a new line and Reboot.

----

--[[User:Mami|Mami]] 22:01, 29 July 2008 (PDT)

Technotrend Budget x-1500

2008-07-30T04:59:46Z

Mami:

TwinhanDTV HDTV Mini Cab

2008-07-29T17:01:39Z

Mami: New page: {| align="right" | __TOC__ |} Category: Hardware Category: Video Category: TV Cards = Cards = *TwinhanDTV HDTV Mini Cab DVB-C = Problem = To get this working in linux yo...

Technotrend Budget x-1500

2008-07-29T16:45:11Z

Mami:

Technotrend Budget x-1500

2008-07-29T16:40:29Z

Mami:

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

== Cards ==

TT-budget C-1500
TT-budget S-1500

== Driver bug ==

To get this card working in LMCE you need to disable the "snd_aw2" (Audiowerk sound card) module.
The driver contains a bug, so it will be loaded for every saa7146 chip.

=== Solution ===

Edit /etc/modprobe.d/blacklist and add "blacklist snd_aw2" to a new line.
Reboot.

--[[User:Mami|Mami]] 09:32, 29 July 2008 (PDT)

Technotrend Budget x-1500

2008-07-29T16:32:19Z

Mami: New page: {| align="right" | __TOC__ |} Category: Hardware Category: Video Category: TV Cards == Cards == TT-budget C-1500 TT-budget S-1500 === Driver bug === To get this card w...

{| align="right"
| __TOC__
|}
[[Category: Hardware]]
[[Category: Video]]
[[Category: TV Cards]]

== Cards ==

TT-budget C-1500
TT-budget S-1500

=== Driver bug ===

To get this card working in LMCE you need to disable the "snd_aw2" (Audiowerk sound card) module.
The driver contains a bug, so it will be loaded for every saa7146 chip.

=== Solution ===

Edit /etc/modprobe.d/blacklist and add "blacklist snd_aw2" to a new line.
Reboot.

--[[User:Mami|Mami]] 09:32, 29 July 2008 (PDT)