LinuxMCE - User contributions [en]

http://wiki.linuxmce.org/api.php?action=feedcontributions&feedformat=atom&user=Markab LinuxMCE - User contributions [en] 2026-10-27T11:46:57Z User contributions MediaWiki 1.44.0 http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17645 User:Markab 2009-02-10T13:43:55Z

<p>Markab: </p> <hr /> <div>{| align="right"<br /> | __TOC__<br /> |}<br /> <br /> <h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> <BR><br /> Also some Channels locks like they don't have EPG data.<BR><br /> -- [[User:Markab|Markab]] 23:29, 20 January 2009 (CET)<BR><br /> Ups Channels where not set to get EPG, now it's OK.<br /> Just have to buy a Frontend for testing on my TV.<BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard: [[MSI MS-7411]] [http://global.msi.com.tw/index.php?func=proddesc&maincat_no=134&cat2_no=&cat3_no=&prod_no=1654]<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <h2>Media Director</h2><br /> here a possible Solution for a MythTV Frontend / LinuxMCE Media Director<br /> <br /> * Case: SilverStone Desktop Gehäuse SST-LC19S-R [http://www.brack.ch/tabid/294/Default.aspx?ID=60987]<br /> * Case addon: Gehäuse Zusatzlüfter ebmpapst 0412FM [http://www.brack.ch/tabid/294/Default.aspx?ID=16633]<br /> * Mainboard: [[ASUS M3N78-EM]] [http://www.brack.ch/tabid/294/Default.aspx?ID=92063]<br /> * CPU: CPU AMD Athlon 64 X2 5200+/2600MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=62935]<br /> * CPU Cooler: Zalman CNPS 8000 [http://www.brack.ch/tabid/294/Default.aspx?ID=34186]<br /> * Memory: Kingston Memory DDR2 2GB Kit PC2-6400 (2x 1GB) 800MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=81204]<br /> * HDD: HDD Travelstar 5K320 2.5" 320GB SATA-II [http://www.brack.ch/tabid/294/Default.aspx?ID=87186]<br /> * HDD Addon: equip SATA und Power in einem Kabel [http://www.brack.ch/tabid/294/Default.aspx?ID=83572] <br /> * DVD: DVD-Brenner 8x Slim S-ATA bulk schwarz [http://www.brack.ch/tabid/294/Default.aspx?ID=91551]<br /> * Bluetooth: Trust BT-2400P [http://www.brack.ch/tabid/294/Default.aspx?ID=82159]<br /> * Keyboard: Logitech Cordless MediaBoard Pro für PS3 [http://www.brack.ch/tabid/294/Default.aspx?ID=95222]<br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17644 User:Markab 2009-02-10T13:33:33Z

<p>Markab: </p> <hr /> <div>{| align="right"<br /> | __TOC__<br /> |}<br /> <br /> <h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> <BR><br /> Also some Channels locks like they don't have EPG data.<BR><br /> -- [[User:Markab|Markab]] 23:29, 20 January 2009 (CET)<BR><br /> Ups Channels where not set to get EPG, now it's OK.<br /> Just have to buy a Frontend for testing on my TV.<BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard: [[MSI MS-7411]] [http://global.msi.com.tw/index.php?func=proddesc&maincat_no=134&cat2_no=&cat3_no=&prod_no=1654]<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> * Case: SilverStone Desktop Gehäuse SST-LC19S-R [http://www.brack.ch/tabid/294/Default.aspx?ID=60987]<br /> * Case addon: Gehäuse Zusatzlüfter ebmpapst 0412FM [http://www.brack.ch/tabid/294/Default.aspx?ID=16633]<br /> * Mainboard: [[ASUS M3N78-EM]] [http://www.brack.ch/tabid/294/Default.aspx?ID=92063]<br /> * CPU: CPU AMD Athlon 64 X2 5200+/2600MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=62935]<br /> * CPU Cooler: Zalman CNPS 8000 [http://www.brack.ch/tabid/294/Default.aspx?ID=34186]<br /> * Memory: Kingston Memory DDR2 2GB Kit PC2-6400 (2x 1GB) 800MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=81204]<br /> * HDD: HDD Travelstar 5K320 2.5" 320GB SATA-II [http://www.brack.ch/tabid/294/Default.aspx?ID=87186]<br /> * HDD Addon: equip SATA und Power in einem Kabel [http://www.brack.ch/tabid/294/Default.aspx?ID=83572] <br /> * DVD: DVD-Brenner 8x Slim S-ATA bulk schwarz [http://www.brack.ch/tabid/294/Default.aspx?ID=91551]<br /> * Bluetooth: Trust BT-2400P [http://www.brack.ch/tabid/294/Default.aspx?ID=82159]<br /> * Keyboard: Logitech Cordless MediaBoard Pro für PS3 [http://www.brack.ch/tabid/294/Default.aspx?ID=95222]<br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17643 User:Markab 2009-02-10T13:28:41Z

<p>Markab: </p> <hr /> <div>{| align="right"<br /> | __TOC__<br /> |}<br /> <br /> <h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> <BR><br /> Also some Channels locks like they don't have EPG data.<BR><br /> -- [[User:Markab|Markab]] 23:29, 20 January 2009 (CET)<BR><br /> Ups Channels where not set to get EPG, now it's OK.<br /> Just have to buy a Frontend for testing on my TV.<BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> * Case: SilverStone Desktop Gehäuse SST-LC19S-R [http://www.brack.ch/tabid/294/Default.aspx?ID=60987]<br /> * Case addon: Gehäuse Zusatzlüfter ebmpapst 0412FM [http://www.brack.ch/tabid/294/Default.aspx?ID=16633]<br /> * Mainboard: [[ASUS M3N78-EM]] [http://www.brack.ch/tabid/294/Default.aspx?ID=92063]<br /> * CPU: CPU AMD Athlon 64 X2 5200+/2600MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=62935]<br /> * CPU Cooler: Zalman CNPS 8000 [http://www.brack.ch/tabid/294/Default.aspx?ID=34186]<br /> * Memory: Kingston Memory DDR2 2GB Kit PC2-6400 (2x 1GB) 800MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=81204]<br /> * HDD: HDD Travelstar 5K320 2.5" 320GB SATA-II [http://www.brack.ch/tabid/294/Default.aspx?ID=87186]<br /> * HDD Addon: equip SATA und Power in einem Kabel [http://www.brack.ch/tabid/294/Default.aspx?ID=83572] <br /> * DVD: DVD-Brenner 8x Slim S-ATA bulk schwarz [http://www.brack.ch/tabid/294/Default.aspx?ID=91551]<br /> * Bluetooth: Trust BT-2400P [http://www.brack.ch/tabid/294/Default.aspx?ID=82159]<br /> * Keyboard: Logitech Cordless MediaBoard Pro für PS3 [http://www.brack.ch/tabid/294/Default.aspx?ID=95222]<br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17642 User:Markab 2009-02-10T13:26:59Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> <BR><br /> Also some Channels locks like they don't have EPG data.<BR><br /> -- [[User:Markab|Markab]] 23:29, 20 January 2009 (CET)<BR><br /> Ups Channels where not set to get EPG, now it's OK.<br /> Just have to buy a Frontend for testing on my TV.<BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> * Case: SilverStone Desktop Gehäuse SST-LC19S-R [http://www.brack.ch/tabid/294/Default.aspx?ID=60987]<br /> * Case addon: Gehäuse Zusatzlüfter ebmpapst 0412FM [http://www.brack.ch/tabid/294/Default.aspx?ID=16633]<br /> * Mainboard: [[ASUS M3N78-EM]] [http://www.brack.ch/tabid/294/Default.aspx?ID=92063]<br /> * CPU: CPU AMD Athlon 64 X2 5200+/2600MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=62935]<br /> * CPU Cooler: Zalman CNPS 8000 [http://www.brack.ch/tabid/294/Default.aspx?ID=34186]<br /> * Memory: Kingston Memory DDR2 2GB Kit PC2-6400 (2x 1GB) 800MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=81204]<br /> * HDD: HDD Travelstar 5K320 2.5" 320GB SATA-II [http://www.brack.ch/tabid/294/Default.aspx?ID=87186]<br /> * HDD Addon: equip SATA und Power in einem Kabel [http://www.brack.ch/tabid/294/Default.aspx?ID=83572] <br /> * DVD: DVD-Brenner 8x Slim S-ATA bulk schwarz [http://www.brack.ch/tabid/294/Default.aspx?ID=91551]<br /> * Bluetooth: Trust BT-2400P [http://www.brack.ch/tabid/294/Default.aspx?ID=82159]<br /> * Keyboard: Logitech Cordless MediaBoard Pro für PS3 [http://www.brack.ch/tabid/294/Default.aspx?ID=95222]<br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17641 User:Markab 2009-02-10T13:24:38Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> <BR><br /> Also some Channels locks like they don't have EPG data.<BR><br /> -- [[User:Markab|Markab]] 23:29, 20 January 2009 (CET)<BR><br /> Ups Channels where not set to get EPG, now it's OK.<br /> Just have to buy a Frontend for testing on my TV.<BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> * Case: SilverStone Desktop Gehäuse SST-LC19S-R [http://www.brack.ch/tabid/294/Default.aspx?ID=60987]<br /> * Case addon: Gehäuse Zusatzlüfter ebmpapst 0412FM [http://www.brack.ch/tabid/294/Default.aspx?ID=16633]<br /> * Mainboard: [[ASUS M3N78-EM]] [http://www.brack.ch/tabid/294/Default.aspx?ID=92063]<br /> * CPU: CPU AMD Athlon 64 X2 5200+/2600MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=62935]<br /> * CPU Cooler: Zalman CNPS 8000 [http://www.brack.ch/tabid/294/Default.aspx?ID=34186]<br /> * Memory: Kingston Memory DDR2 2GB Kit PC2-6400 (2x 1GB) 800MHz [http://www.brack.ch/tabid/294/Default.aspx?ID=81204]<br /> * HDD: HDD Travelstar 5K320 2.5" 320GB SATA-II [http://www.brack.ch/tabid/294/Default.aspx?ID=87186]<br /> * HDD Addon: []<br /> * DVD: DVD-Brenner 8x Slim S-ATA bulk schwarz [http://www.brack.ch/tabid/294/Default.aspx?ID=91551]<br /> * Bluetooth: []<br /> * Keyboard: []<br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17184 User:Markab 2009-01-20T22:29:09Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> <BR><br /> Also some Channels locks like they don't have EPG data.<BR><br /> -- [[User:Markab|Markab]] 23:29, 20 January 2009 (CET)<BR><br /> Ups Channels where not set to get EPG, now it's OK.<br /> Just have to buy a Frontend for testing on my TV.<BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17170 User:Markab 2009-01-19T20:32:04Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> Also some Channels locks like they don't have EPG data.<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17169 User:Markab 2009-01-19T20:15:08Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <BR><br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<BR><br /> Some Strange Errors left --> DTVSM(0) Error: Wrong PMT; pmt->pn. No Idea what's that<br /> <pre><br /> 2009-01-19 20:49:10.201 New DB connection, total: 1<br /> 2009-01-19 20:49:10.226 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.227 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:10.232 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.236 New DB connection, total: 2<br /> 2009-01-19 20:49:10.244 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:10.248 Current Schema Version: 1214<br /> 2009-01-19 20:49:10.353 DTVSM(0) Error: Wrong PMT; pmt->pn(4101) desired(4100)<br /> 2009-01-19 20:49:10.356 DTVSM(0) Error: Wrong PMT; pmt->pn(4106) desired(4100)<br /> 2009-01-19 20:49:10.357 DTVSM(0) Error: Wrong PMT; pmt->pn(5101) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(3535) desired(4100)<br /> 2009-01-19 20:49:10.475 DTVSM(0) Error: Wrong PMT; pmt->pn(4102) desired(4100)<br /> 2009-01-19 20:49:10.479 DTVSM(0) Error: Wrong PMT; pmt->pn(4178) desired(4100)<br /> 2009-01-19 20:49:10.587 DTVSM(0) Error: Wrong PMT; pmt->pn(4061) desired(4100)<br /> 2009-01-19 20:49:10.588 DTVSM(0) Error: Wrong PMT; pmt->pn(4103) desired(4100)<br /> 2009-01-19 20:49:10.593 DTVSM(0) Error: Wrong PMT; pmt->pn(5099) desired(4100)<br /> 2009-01-19 20:49:10.701 DTVSM(0) Error: Wrong PMT; pmt->pn(4105) desired(4100)<br /> 2009-01-19 20:49:10.702 DTVSM(0) Error: Wrong PMT; pmt->pn(5100) desired(4100)<br /> 2009-01-19 20:49:10.969 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.987 Finished recording Der Rauch der Träume: channel 5100<br /> 2009-01-19 20:49:11.999 AutoExpire: CalcParams(): Max required Free Space: 3.0 GB w/freq: 15 min<br /> 2009-01-19 20:49:12.058 Using runtime prefix = /usr<br /> 2009-01-19 20:49:12.060 Empty LocalHostName.<br /> 2009-01-19 20:49:12.061 Using localhost value of antares<br /> 2009-01-19 20:49:12.065 New DB connection, total: 1<br /> 2009-01-19 20:49:12.069 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.070 Closing DB connection named 'DBManager0'<br /> 2009-01-19 20:49:12.072 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.076 New DB connection, total: 2<br /> 2009-01-19 20:49:12.080 Connected to database 'mythconverg' at host: localhost<br /> 2009-01-19 20:49:12.084 Current Schema Version: 1214<br /> 2009-01-19 20:49:12.090 Preview Error: Previewer file '/var/lib/mythtv/recordings/5100_20090119204909.mpg' is not valid.<br /> 2009-01-19 20:49:12.093 Preview Error: Run() file not local: '/var/lib/mythtv/recordings/5100_20090119204909.mpg'<br /> 2009-01-19 20:49:12.104 Preview Error: Preview process not ok.<br /> fileinfo(/var/lib/mythtv/recordings/5100_20090119204909.mpg.png) exists: 0 readable: 0 size: 0<br /> 2009-01-19 20:49:12.685 AFD: Opened codec 0x218c8b0, id(MPEG2VIDEO) type(Video)<br /> 2009-01-19 20:49:12.688 AFD: codec MP3 has 2 channels<br /> 2009-01-19 20:49:12.689 AFD: Opened codec 0x218cd90, id(MP3) type(Audio)<br /> 2009-01-19 20:49:12.730 Preview: Grabbed preview '/var/lib/mythtv/recordings/5069_20090119204859.mpg' 720x576@64s<br /> </pre><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17168 User:Markab 2009-01-19T20:12:17Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> -- [[User:Markab|Markab]] 21:12, 19 January 2009 (CET)<BR><br /> Ok got it! It was the Conax CI Modul. After check the Signal strength over my cable modem I go to my provider and he check the conax module in a TV. My Conax CI has some Problem with some TV Station that are modulate on some Channel ( not really clear for me, have to check that later ) This is a known Problem ! The only Conax CI that works for my Provider is the Techisat Technicrypt CX Module ( Art-Nr.: 941304-62 ~100 CHF ex. www.conrad.ch )<br /> Also my DVB-C Card from Satelco does not work, also not with this new Conax CI Card. Only the Mystique CaBiX-C2 works now OK. Also HD does work but need hugh CPU load, some Channels crash immediately.<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17159 User:Markab 2009-01-18T21:56:46Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> -- [[User:Markab|Markab]] 22:56, 18 January 2009 (CET)<BR><br /> Found also some strange problems with liveTV and records ( lost some frames and audio is bad --> http://www.mail-archive.com/linux-dvb@linuxtv.org/msg08237.html, http://www.youtube.com/watch?v=Wa3xOSdJc2w ) Maybe a performance Problem on my AMD Sempron Testbox, do a complet reinstallation on my Desktop ( Intel Q6600 with 4GB Memory ) but don't help.<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17038 User:Markab 2009-01-07T23:57:54Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<BR><br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<BR><br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> I get some initial DHCP IP, also routing locks OK, but I can't ping my server and also have no access to the internet.<br /> There is a program after the DHCP - Client that change something.<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17037 User:Markab 2009-01-07T23:48:22Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> -- [[User:Markab|Markab]] 00:48, 8 January 2009 (CET)<br /> Finished the DVD Installation Setup with the Networkpart, also deactivate the firewall. Does not lock like it would help.<br /> <BR><br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=17000 User:Markab 2009-01-06T11:40:55Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <BR><br /> -- [[User:Markab|Markab]] 12:40, 6 January 2009 (CET)<br /> found new Wikipage [[Alx9r's Sample Setup]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16999 User:Markab 2009-01-06T11:39:42Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[Alx9r's Sample Setup]]<br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16998 User:Markab 2009-01-05T23:17:31Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. If someone can give me a hint I really appreciate that! Thx Mike<br /> <BR><br /> '''Next steps:'''<br /> Wiki pages to check:<BR><br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16997 User:Markab 2009-01-05T23:16:21Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again.<br /> <BR><br /> '''Next steps:'''<br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16996 User:Markab 2009-01-05T23:15:47Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> * Mediadirector needed to check LinuxMCE functonality<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again.</BR><br /> '''Next steps:'''<br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16995 User:Markab 2009-01-05T23:14:54Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> * check Graphikcard to support min. UI2 medium, maybe new Card needed<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. <br /> '''Next steps:'''<br /> * [[DVD Installation]]<br /> * [[Hybrid]]<br /> * [[Use a satellite/cable box with the PVR]]<br /> * [[LinuxMCE Admin Website]]<br /> * [[Selecting the Right UI]]<br /> * [[Outside Access]] <br /> <br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16994 User:Markab 2009-01-05T23:09:42Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]] and found than the DVD Install Guide [[DVD Installation]]<br /> * During the Installation I add my Monitor over the S-Video Connector from the PVR-350 but nothing appear. Only the VGA works. In the AV Wizard it is not clar for me what sort of connection should i take and why my TV-out from the PVR-350 does not work.<br /> * I hear the sound and also did the House Setup Wizard, but I did not modify the Network as describe in the DVD Install Page ( found it to late )<br /> <br /> '''Problems:'''<br /> * MythTV don't work, not clear for me howto setup my TV - Cards ( digital DVB-C and analog PVR-350 )<br /> * Connection to Internet don't work, so I also can't update my Installation or install the DVD restricted Drivers<br /> * remote connection from my lAN don't work, not clear what is wrong IP / routing ok<br /> <br /> '''Hardware Overview'''<br /> <pre><br /> processor : 0<br /> vendor_id : AuthenticAMD<br /> cpu family : 15<br /> model : 44<br /> model name : AMD Sempron(tm) Processor 2800+<br /> stepping : 2<br /> cpu MHz : 1599.909<br /> cache size : 256 KB<br /> fdiv_bug : no<br /> hlt_bug : no<br /> f00f_bug : no<br /> coma_bug : no<br /> fpu : yes<br /> fpu_exception : yes<br /> cpuid level : 1<br /> wp : yes<br /> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts ttp tm stc<br /> bogomips : 3203.50<br /> clflush size : 64<br /> </pre><br /> <pre><br /> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)<br /> Subsystem: Hauppauge computer works Inc. WinTV PVR-350<br /> Flags: bus master, medium devsel, latency 64, IRQ 17<br /> Memory at e4000000 (32-bit, prefetchable) [size=64M]<br /> Capabilities: [44] Power Management version 2<br /> <br /> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)<br /> Subsystem: KNC One Unknown device 0022<br /> Flags: bus master, medium devsel, latency 32, IRQ 20<br /> Memory at ea0c0000 (32-bit, non-prefetchable) [size=512]<br /> </pre><br /> <pre><br /> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br /> Subsystem: Elitegroup Computer Systems Unknown device 1877<br /> Flags: medium devsel, IRQ 21<br /> I/O ports at e400 [size=256]<br /> Capabilities: [c0] Power Management version 2<br /> 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) (prog-if 00 [VGA])<br /> Subsystem: Elitegroup Computer Systems Unknown device 1b45<br /> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16<br /> Memory at e0000000 (32-bit, prefetchable) [size=64M]<br /> Memory at e8000000 (32-bit, non-prefetchable) [size=16M]<br /> [virtual] Expansion ROM at e9000000 [disabled] [size=64K]<br /> Capabilities: [60] Power Management version 2<br /> Capabilities: [70] AGP version 3.0<br /> </pre><br /> '''Summary Frist Day:'''<br /> It's always really frustrating if you don't get any success. But I don't want to give up and try it again. <br /> <br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16993 User:Markab 2009-01-05T22:22:09Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> Because my File Server is near EOL ( it's a old ML530 with Pentium3 in ) I will probably buy a [http://h18004.www1.hp.com/products/quickspecs/13013_div/13013_div.html HP ProLiant ML115 Generation 5 (G5)]. But this new Server has no PCI Slots anymore. Because it should be the Core, I need min. 2 Slots for the DVB-C Cards. At ARP I found a Expansion Box, PCI-E to PCI, with 4 Slots, that should fit my needs.<br /> <br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16992 User:Markab 2009-01-05T22:13:38Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16991 User:Markab 2009-01-05T22:13:23Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <BR><br /> The Development System should be a Playground to learn what can LinuxMCE and what not. I try to do a [[Hybrid]] Setup with a old PC. It's clear for me that it's not for production use, but before I invest more Money I d'like to have a complet LinuxMCE Solution up and running.<br /> At my Home I have a Internet Connection to my local Cableprovider with a Bride, my Firewall is a Pfsense with 3 Interfaces ( WAN,LAN,WLAN ). This Firewall is my Defaultrouter. At the LAN Side I have a central Server with all necessary services ( DHCP, DNS Forward, ftp, smb,nfs,ntp, ) on a old Proliant. Now i have connected the LinuxMCE dev. Server Orion with the external NIC to this LAN and the other NIC is then the LinuxMCE Standard Net ( with the IP Range 192.168.80/24 ) <br /> Target is to setup the LinuxMCE dev. Server with MythTV and all other Services. I want live TV, scheduling and DVD / Video ripping, etc. <br /> <BR><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> * First TV is a small one for the Fitness room maybe a Sony, because they have DVB-C Tuner [http://www.sony.ch/lang/de/product/t15-e-series/kdl-26e4000 link Sony KDL-26E4000]<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16990 User:Markab 2009-01-05T22:00:52Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16989 User:Markab 2009-01-05T22:00:30Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16988 User:Markab 2009-01-05T21:47:16Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this [[Installation Guide]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16987 User:Markab 2009-01-05T21:46:55Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> * I try to follow this[[Installation Guide]]<br /> <BR><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16986 User:Markab 2009-01-05T21:42:43Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> <BR><br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16985 User:Markab 2009-01-05T21:42:24Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> ---------------|------------------------------------------------------------------ <br /> | | |<br /> '''LAN Server''' | '''Clients ( PC,Laptops, etc )'''<br /> ( DHCP,DNS,nfs,smb,etc) |<br /> '''LinuxMCE dev Server Orion'''<br /> ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> <BR><br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16984 User:Markab 2009-01-05T21:37:39Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall (def GW)''' ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> '''LAN Server''' ----|-------------- <br /> ( DHCP,DNS,nfs,smb,etc) | <br /> | <br /> '''LinuxMCE dev Server Orion''' ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> <BR><br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16983 User:Markab 2009-01-05T21:37:15Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall''' (def GW) ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> '''LAN Server''' ----|-------------- <br /> ( DHCP,DNS,nfs,smb,etc) | <br /> | <br /> '''LinuxMCE dev Server Orion''' ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> <BR><br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16982 User:Markab 2009-01-05T21:36:54Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall''' (def GW) ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> '''LAN Server''' ----|-------------- <br /> ( DHCP,DNS,nfs,smb,etc) | <br /> | <br /> '''LinuxMCE dev Server Orion''' ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> <BR><br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16981 User:Markab 2009-01-05T21:36:40Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall''' (def GW) ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> '''LAN Server''' ----|-------------- <br /> ( DHCP,DNS,nfs,smb,etc) | <br /> | <br /> '''LinuxMCE dev Server Orion''' ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <br /> <BR><br /> <br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> <BR><br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16980 User:Markab 2009-01-05T21:36:10Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> * TV-Card ( DVB-C ): Mystique CaBiX-C2, DVB-C, HDTV / Mystique View CI-Interface (f. 1 CAM) PCI und 3.5" Variante / Conax CAM (Rev. 1.2) - 4.00e by Smit ( from dvbshop ) <br /> * TV-Card ( analog ): Hauppauge PVR-350<br /> <BR><br /> <h3>Hybrid Network Overview</h3><br /> <BR><br /> '''Internet'''<br /> |<br /> | <br /> '''Firewall''' (def GW) ------( WLAN;192.168.Y )<br /> | <br /> (LAN;192.168.X )<br /> | <br /> '''LAN Server''' ----|-------------- <br /> ( DHCP,DNS,nfs,smb,etc) | <br /> '''LinuxMCE dev Server Orion''' ( DHCP,Mythtv, Asterisk,etc ) <br /> | <br /> (LinuxMCE Net;192.168.80.0 ) <br /> | <br /> | <br /> ( LinuxMCE Test equipment ) <br /> <br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> * Luck that I found the DVD that provide Hari to me, with this DVD the Installation I was able to start the 32bit Installation and finish it.<br /> <BR><br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16979 User:Markab 2009-01-05T21:03:40Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> -- [[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> * With this DVD I was not able to do a Installation, stops every time right at the beginning. The question about the Harddisk overwrite does not come up.<br /> *<br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16978 User:Markab 2009-01-05T21:01:25Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> --[[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> <br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16977 User:Markab 2009-01-05T21:01:05Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> --[[User:Markab|Markab]] 22:01, 5 January 2009 (CET)<BR><br /> * after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images<br /> from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> <br /> ----<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16976 User:Markab 2009-01-05T20:59:34Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> '''20090105'''<BR><br /> after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images<br /> from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16975 User:Markab 2009-01-05T20:58:54Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> 20090105<BR><br /> after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images<br /> from the torrent mirrors describe on the Wikipage [[Mirrors 710]]<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16974 User:Markab 2009-01-05T20:56:28Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> 20090105<br /> <pre>after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images<br /> from the torrent mirror [[http://wiki.linuxmce.org/index.php/Mirrors_0710]] </pre><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16973 User:Markab 2009-01-05T20:56:06Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> 20090105<br /> <pre>after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images<BR><br /> from the torrent mirror [[http://wiki.linuxmce.org/index.php/Mirrors_0710]] </pre><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16972 User:Markab 2009-01-05T20:55:50Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> 20090105<br /> <pre> after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images <BR><br /> from the torrent mirror [[http://wiki.linuxmce.org/index.php/Mirrors_0710]] </pre><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16971 User:Markab 2009-01-05T20:54:12Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> 20090105<br /> <pre> after check out the Forum I decide to go with a DVD Installation I download the i386 and the amd64 images from the torrent mirror [[http://wiki.linuxmce.org/index.php/Mirrors_0710]] </pre><br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16970 User:Markab 2009-01-05T20:52:07Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> I will write here about my experiences installing a LinuxMCE Server, I hope this time I will have success. I also want to share my Expirense to other users who maybe want to do the same. <br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <BR><br /> <h3>Hybrid Install Logbook</h3><br /> 20090105<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16969 User:Markab 2009-01-05T20:44:12Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 ( [http://www.heise.de/kiosk/archiv/ct/2002/23/130_kiosk] Sonderwege von Georg Schnurer ) a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16968 User:Markab 2009-01-05T20:35:38Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> After I read a Artikel in the german c't 23/2002 a Success Story about a Digital Home Implementation, it was clear for me that someday I also want something like this.<br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16967 User:Markab 2009-01-05T20:30:39Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> [[Image:Kscan_0015.jpg|none|thumb|300px|ct 23/2002]]<br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard: Elitegroup K8M800-M2<br /> * CPU: AMD Sempron 2200 <br /> * Memory: 512 MB DDR RAM<br /> * HDD: 80 GB<br /> * NIC: Dual GB Nic, NC304<br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16964 User:Markab 2009-01-05T13:36:46Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> [[Image:Kscan_0015.jpg|none|thumb|300px|ct 23/2002]]<br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h1>Setup Production ( Planed ) </h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16963 User:Markab 2009-01-05T13:33:47Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> [[Image:Kscan_0015.jpg|none|thumb|300px|ct 23/2002]]<br /> <br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h1>Setup Production</h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16962 User:Markab 2009-01-05T13:33:32Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> [[Image:Kscan_0015.jpg|none|thumb|300px|ct 23/2002]]<br /> <BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h1>Setup Production</h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab http://wiki.linuxmce.org/index.php?title=User:Markab&diff=16961 User:Markab 2009-01-05T13:32:26Z

<p>Markab: </p> <hr /> <div><h1>History about my Digital Home</h1><br /> <br /> [[Image:Kscan_0015.jpg|left|thumb|300px|ct 23/2002]]<br /> <BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><br /> <h1>Setup Development</h1><br /> <h2>Hybrid</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h1>Setup Production</h1><br /> <h2>Core</h2><br /> * Mainboard:<br /> * CPU:<br /> * Memory:<br /> * HDD:<br /> * NIC:<br /> <br /> <br /> <h2>Media Director</h2><br /> <br /> <br /> <h2>Orbiters</h2><br /> <br /> <br /> <h2>Mobile Orbiters</h2><br /> <br /> <br /> <h2>AV</h2><br /> * [[SlimDevices_Squeezebox]] 3<br /> * Popcornhour NMT Mediaplayers A-110<br /> <br /> <h2>Phone</h2><br /> <br /> <br /> <h2>Home Automation</h2><br /> <br /> <br /> <h2>Security</h2></div>

Markab