From LinuxMCE wiki

Version	Status	Date Updated	Updated By
710	According to category, Works without caveats	11th May 2010	Wierdbeard65
810	Unknown	N/A	N/A
Usage Information

Elitegroup GF8100VM-M3 (V1.0)

Contents 1 Usage 2 Status 3 Problems on Installation 3.1 onboard graphics: 3.2 onboard NIC: 4 Hardware Features 4.1 CPU 4.2 BIOS 4.3 Chipset 4.4 Memory 4.5 Graphics 4.6 Audio 4.7 LAN 4.8 Storage 4.9 Expansion 4.10 Rear Panel 4.11 Form Factor

Usage

I'm just using this Motherboard in my Core/Hybrid. I've only installed LinuxMCE and haven't really done any configuration.

Status

Everything is working fine.

Tested with UI2 without Alpha-Blending no problems.

Problems on Installation

- LinuxMCE-7.10-AMD64.rc2.iso:

Setup got black screen after the starting "Installing LinuxMCE from DVD"

- LinuxMCE-7.10-i386.rc2.iso:

Installation is running through correctly.

onboard graphics:

After first reboot the Display is only black flickering.without showing the AV-Wizard

Fix: 

* Press ESC on Grub-menu
* Start  LinuxMCE (System recovery mode)
* install new nvidia-driver as mentioned here
* after reboot the AV-Wizard is shown

onboard NIC:

The onboard NIC (Realtek 8211B Gigabit Lan PHY) isn't working out of the box with LinuxMCE 7.10.!!!

Fix: 

* Update to kernel 2.26 as mentioned here

Hardware Features

CPU

• AMD Phenom™ processor (Socket AM2+)
• AMD Athlon™ 64 X2 Dual Core/ Athlon™ 64 / Sempron processor
• High-performance HyperTransport 3.0 CPU Interface
• Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU

BIOS

• AMI BIOS with 8Mb SPI ROM

Chipset

• NVIDIA MCP78V Single Chipset

Memory

• 4 x 240-pin DDR2 DIMM socket support up to 32GB*

Graphics

• On Chip ( NVIDIA GeForce8100 based with 2D/3D graphic engine)
• Share Memory: Maximum up to 512MB

Audio

• IDT 92HD206 (Co-lay 92HD202)
• Compliant with 8CH HD audio specification

LAN

• Realtek 8211B Gigabit Lan PHY

Storage

• 2 x Ultra DMA133/100/66 devices
• 6 x Serial ATA 3.0Gb/s devices
• RAID0, RAID1, RAID0+1, RAID5 configuration

Expansion

• 1 x PCI Express x16 Gen2.0 slot (Support Hybrid SLI)
• 2 x PCI Express X 1 Gen1.1 slot
• 1 x PCI

Rear Panel

• 1 x PS/2 keyboard & PS/2 mouse connectors
• 1 x VGA port
• 1 x DVI connector
• 1 x COM Port
• 6 x USB ports
• 1 x Ethernet Port
• 1 x Audio port (Line-in, Line-out, Mic-in)

Form Factor

• Micro-ATX
• 244mm*244mm