Installing LinuxMCE on Virtual Machine via KVM
|Version||Status||Date Updated||Updated By|
|810||relevant||13th December 2010||daballiemo|
- 1 KVM: To boldly go where (almost) no man has gone before
- 1.1 Install Ubuntu 9.10 server
- 1.2 Update
- 1.3 Install management tools
- 1.4 Getting the right kernel and parameters
- 1.5 Booting with the new kernel
- 1.6 Deinstall networkmanager
- 1.7 Networking setup
- 1.8 Install LinuxMCE
- 1.9 The rest
- 2 Hints/Known Issues/Working Hardware
KVM: To boldly go where (almost) no man has gone before
In this overview I will try to follow the installation path to get LCME 8.10 into a virtual machine which uses PCI(-E) devices from the host. Normally the option to install on a dedicated computer is the best, but as I want to host several systems, including LCME, websites etc and the ease of testing out new stuff combined with the fact that I want to keep it as green as possible lead me to the conclusion that virtualization was the way to go. Over the last 2 years I've been building systems that have failed in doing what I wanted (XEN and KVM based), but with the latest state of soft- and hardware I'll hope I'll have a better chance. The below is my questfor the wanted setup up, step by step.
Virtualization the way I want to do it can only be done with specific hardware/firmware which uses VT-d, a virtualization PCI Passthrough technique embedded in the bios.
So I will state my machine details first:
- Motherboard: ASUS P5E VM DO with bios 10.1
- CPU: Q6600
- 6 Gb DDR-2 Memory
- 1 onboard GbE Nic
- 1 PCI-E GbE Nic
- 1 Hauppauge PVR-150
- 1 Hauppauge PVR-500
root@obelix:~# lspci 00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) 00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02) 00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02) 00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02) 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 02) 01:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06) 02:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 02:01.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11) 03:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 03:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) root@obelix:~#
Install Ubuntu 9.10 server
Step 1) Install Ubuntu 9.10 server AMD 64 (should be easy enough if you are able to get LMCE up and running :-) )
Step 2) Make the system current:
sudo apt-get update sudo apt-get upgrade
Install management tools
Step 3) Add some management tools:
I use webmin to give my server a fixed ip address and perform other administrative tasks.
apt-get install libnet-ssleay-perl libauthen-pam-perl libio-pty-perl libmd5-perl wget http://downloads.sourceforge.net/project/webadmin/webmin/1.510/webmin_1.510-2_all.deb?r=http%3A%2F%2Fwww.webmin.com%2Fdownload.html&ts=1283088165&use_mirror=netcologne dpkg -i webmin_1.510-2_all.deb
I use MidNight Commander for file stuff
apt-get install mc
Getting the right kernel and parameters
Step 4) Getting the right kernel and parameters
Install the required tools and packages, so open a terminal and type the following,
apt-get install fakeroot kernel-wedge build-essential makedumpfile kernel-package libncurses5 libncurses5-dev
Get the right kernel, at the time of writing 220.127.116.11 was the best kernel source.
wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-18.104.22.168.tar.bz2 tar -jxvf linux-22.214.171.124.tar.bz2 -C /usr/src
Go to the unpack directory
It is a good idea to start with the same .config as the currently running kernel, so type the following,
cp -vi /boot/config-`uname -r` .config
Now we are ready to customize the build and kernel options.
* set "Bus options (PCI etc.)" -> "Support for DMA Remapping Devices" to "*" * set "Bus options (PCI etc.)" -> "Enable DMA Remapping Devices" to "*" * set "Bus options (PCI etc.)" -> "PCI Stub driver" to "*" This line broke my setup so I took it out * optional setting: set "Bus options (PCI etc.)" -> "Support for Interrupt Remapping" to "*"
Once you have finished, save and exit. It is now time to compile. However to speed up the build if you have a dual/triple/quad core processor type,
The general rule is 1 + the number of processor cores.
Building the new kernel
Step 5) Build the new kernel.
make-kpkg clean fakeroot make-kpkg --initrd --append-to-version=-iommu kernel-image kernel-headers
You can grab a coffee, make a hot meal, have a sleep ;-)
Instaling the new kernel
Step 6) Install The New Kernel
After the successful kernel build, you can find two .deb packages in the /usr/src directory.
cd .. ls -l linux*
dpkg -i linux-image-2.6.33-custom_2.6.33-custom-10.00.Custom_amd64.deb dpkg -i linux-headers-2.6.33-custom_2.6.33-custom-10.00.Custom_amd64.deb
Booting with the new kernel
Step 7) Booting with the new kernel
Add the options to enable IOMMU in the kernel commandline
new: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_iommu=on,igfx_off,pass-through" old: #GRUB_CMDLINE_LINUX_DEFAULT="quiet"
update the booting menu
Step 8) Deinstall networkmanager
aptitude remove network-manager
Step 9) Setup your network, change /etc/network/interfaces to look like this
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The first bridge interface auto bridge_ext iface bridge_ext inet static address 0.0.0.0 #no external access without going through DCERouter first netmask 255.255.255.0 broadcast 10.0.0.255 gateway 10.0.0.138 bridge_ports eth0 bridge_stp off bridge_maxwait 5 # The second bridge interface auto bridge_int iface bridge_int inet static address 192.168.80.240 netmask 255.255.255.0 broadcast 192.168.80.255 gateway 192.168.80.1 bridge_ports eth1 bridge_stp off bridge_maxwait 5
With the above the host will use dcerouter as its way into the internet and thus the protection offered by the firewall. The host has no direct access to the 10.0.0.0 network.
Step 10) Install LinuxMCE
Using virt-manager you can now install LinuxMCE. As we are all experts on that I will only give away my xml config file (should be enough ;-))
<domain type='kvm'> <name>DCERouter</name> <uuid>xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.11'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='block' device='disk'> <source dev='/dev/sdc'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='xx:xx:xx:xx:xx:xx'/> <source bridge='bridge_ext'/> </interface> <interface type='bridge'> <mac address='xx:xx:xx:xx:xx:xx'/> <source bridge='bridge_int'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </source> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x03' slot='0x08' function='0x0'/> </source> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x03' slot='0x09' function='0x0'/> </source> </hostdev> <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x0403'/> <product id='0xf2d0'/> </source> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x00' slot='0x1b' function='0x0'/> </source> </hostdev> </devices> </domain>
Step 11) Enjoying building a test enviroment, inline upgrade etc.
Step 12) I chose to put my media on the host via a Samba share which will be detected as a NAS. This will simplify things when performing upgrades and test. Because I am using LVM also expansion is easy ;-)
Hints/Known Issues/Working Hardware
- NVidia Chipset 3600 with Opteron Socket F has full KVM support and works fine with LMCE 8.10.
- ATI-driver 9.8 supports kernel 2.6.30
- As you can't choose the keyboard-layout in virtual-manager, simply change the keymap in the xml-file e.g. from "en-us" to "de".
- Step 11) is not needed if the physical network devices are configured as 'auto ethx \ iface ethx inet manual'
- The virtual LMCE runs fine with only one NIC provided to it. The setup automatically configures a sub-NIC which works well. I would suggest to have the host provide the internet-access, so vLMCE can't mess it up at the installation.
PCI-Passthrough at KVM
- PCI-Passthrough only works if the full PCI-device is transferred to the virtual machine. So if the PCI-Slot has sub-functions (e.g. Firewire) all of the 'functions' have to be adressed to the virtual machine with the <hostdev> section of Step 12). To look up your PCI-device-tree, use 'lspci -t'.
(Tyan S2915-E) [0000:00]-+-00.0 +-01.0 +-01.1 +-02.0 +-02.1 +-04.0 +-05.0 +-05.1 +-06.0-[0000:01]----04.0 (<- PCI-Slot = DVB-card) \-04.1 (<- Firewire, either disable in Bios or ->KVM) +-06.1 +-08.0 +-09.0 +-0d.0-[0000:02-04]--+-00.0-[0000:03]----04.0 | \-00.1-[0000:04]-- +-0f.0-[0000:05]--+-00.0 | \-00.1 +-18.0 +-18.1 +-18.2 +-18.3 \-18.4
- PCIe-devices do not have this restriction.
- Please note that each change in the .xml-files is activated only after rebooting the libvirtd. You can do this manually by killing and restarting the process "libvirtd" or by a host reboot.
Problems with PVR-150 not responding
During usage it turned out that sometimes recordings failed having a total size of 0 B. Live TV has not worked stable at all. Checking the mythbackend logs shows that /dev/video0 was not responding as expected. Furthermore I detected DMA errors in the log of the host.
I am now testing the commandline option iommu=on,igfx_off,pass-through, where pass-through should be able to iron out the DMA errors.
Because the behaviour was not stable I also installed the mercurial ivtv drivers (within the VM ofcourse!!!!):
sudo apt-get install mercurial cd /usr/src sudo hg clone http://linuxtv.org/hg/v4l-dvb cd v4l-dvb sudo make sudo make install sudo make unload sudo make load
You will have to rebuild after a kernel change.
Clicking sound on Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
When passing-through my audio card I noticed hick ups in the MP3's and a message in kern.log;
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
add the following line at the bottom;
options snd-hda-intel model=3stack-dig options snd-hda-intel enable_msi=1 options snd-hda-intel single_cmd=1
and reboot (reload alsa does not seem to have the full effect)
Tip from Bugs Launchpad