SOYO P4RC350
From LinuxMCE wiki
Works as media director with UI2 (medium setting) without configuration (e.g. driver tinkering).
Board Specifications (copied from SOYO's website http://soyo.com/product/search/1/SY-P4RC350_%28Prescott-Ready%29_%28Discontinued%29/241)
Features: Chipset embedded ATi 2D/3D Graphic Technology Embedded ALC650M Audio Codec 6 channels solution Software power off control, power-on by keyboard, power-on by alarm, Modem Ring-On Supports ATX12V Power Supply Supports Hardware Monitor funtion under BIOS to streamline your PC system management Supports WOL (Wake On LAN) Suspend to RAM, Suspend to Disk Supports USB 2.0 LAN Party READY 10/100 Connection
Form Factor: Micro ATX
Processor Description: Pentium 4: 1.4GHz - 3.4GHz Celeron: 1.7GHz - 2.8GHz Click here for maximum CPU support
CPU Interface: Socket 478
Graphics Info: Share system memory up to 128MB ATi "HYPER Z" memory optimization technology. Integrated high precision 300MHz triple 10-bit DAC supports resolution up to 2048x1536 Supports 3D textures filtering and Full Screen Anti-Aliasing (FSAA)
Chipset Description: ATi Radeon 9100 chipset Supports 400/533/800MHz FSB
System Memory Type: DDR400/333
System Memory Description: Two 184-pin DDR SDRAM 2.5V DIMM Sockets Supports Single Channel DDR266/333/400 up to 2GB
Expansion Slots: Three PCI slots One 8X AGP slot
Audio Description: On board 6 Channels Surround Audio Solution
IO Description: PS/2 Mini-DIN mouse & keyboard ports Six USB 2.0 ports (2 rear/4 pin headers) One D-sub 25-pin female printer port One VGA port One IrDA One D-sub 9 pin male serial port Audio I/O: LINE-Out x 1, LINE-In x 1, MIC JACK x 1
IO Connections Description: PS/2 Mini-DIN mouse & keyboard ports Four USB 2.0 ports One D-sub 25-pin female printer port One D-sub 9-pin male serial port One RJ45 10/100 LAN Connector Audio I/O: Line-Outx1, Line Inx1, MIC JACKx1
IDE Description: Two Channels Parallel ATA connectors Supports up to PIO Mode 5 and UDMA 66/100 Two PCI bus mastering ATA E-IDE ports IDE Type: UDMA
BIOS Description: Award PCI BIOS with ACPI function Supports multiple-boot from E-IDE/SCSI/CD-ROM/FDDLS120/ZIP 4 MB Flash ROM
Health Monitoring Description: On-board voltage monitors for +3.3V, +12V, +5V, +5VSB CPU fan speed monitor CPU temperature monitoring through On-Die thermal sensor System temperature monitor
USB Info: USB 2.0
PXE Support PXE is not natively supported on this board (confirmed by SOYO). (I don't know if tutorials are appropriate, but at the time of writing, here's what I did).
If you visit: http://rom-o-matic.net/5.4.3/ and download the third file from the bottom (via-velocity:via-velocity -- [0x1106,0x3119]) and use the provided instructions (download the .zdsk file, copy it to a foppy using cat eb-5.4.3-via-velocity.zdsk > /dev/fd0) you can get the motherboard to boot from the network.
