From LinuxMCE wiki
|Version||Status||Date Updated||Updated By|
|810||According to category, Works without caveats||21st April 2012||mhorst|
Z-Wave wall-mounted switch transmitter, battery powered
This is exactly the same hardware as the Düwi_Popp_ZW_WS_05443 Z-Wave switch, but with new firmware developed by Z-Wave.Me.
The firmware has many additional features compared to the original Düwi firmware. Most importantly, for LinuxMCE, is that LinuxMCE can receive events from this controller, even when the controller is not associated with any device.
Installation Notes / Experience
The user manual for the switch says I have to hold the Inclusion button for two seconds to add the switch to the existing network. This worked, in combination with pressing the button on the Aeon_Labs_Z-Wave_Interface in my core. However, I only received events after I also had presse the button on the Aeon Labs stick and pressed the controller three times.
Association of devices to this controller can be performed via the LinuxMCE web-admin panel. However, I had to press the controller's button three times before the new configuration from LinuxMCE became active on the switch itself.