View source for User:GnEeErKd/Configuration Files

=Configuration Files=

==/etc/init.d/linuxmce==
*I don't know if the specific placement of this line really matters, but this worked for me

 StartService "Setting SSH Keys" "/usr/pluto/bin/SSH_Keys.sh" "&"
 StartService "Setting Coredump Location" "/usr/pluto/bin/corefile.sh"
 StartService "Creating Firewire 2 Video4Linux Pipes" "/usr/pluto/bin/Firewire2Video4Linux.sh"
 StartService "Configuring Pluto Storage Devices" "/usr/pluto/bin/StorageDevices_Setup.sh"
 /etc/init.d/samba start
 StartService "Detecting Timezone" "/usr/pluto/bin/Timezone_Detect.sh" "&"
 StartService "Status Radar" "/usr/pluto/bin/StorageDevices_StatusRadar.sh"
 StartService "Samba Radar" "/usr/pluto/bin/StorageDevices_SambaRadar.sh"
 StartService "PVR-250 tuner restore" "/usr/pluto/bin/CaptureCards_BootConfig_PVR-250.sh"
 '''StartService "KDE Desktop" "/usr/pluto/bin/Start_KDE.sh"'''
 ## Setup ALSA mixers
 ...

    
==/etc/network/interfaces==
*(the eth0 configuration should be set according to the network the media center is connected to)

 auto lo
 iface lo inet loopback
 auto eth0d localhost 62 -1000 2 9 25 0" replacing 62 with the device code of the generic sensor you created 
 iface eth0 inet static
    address 192.168.200.42
    netmask 255.255.255.0
    gateway 192.168.200.1
 auto eth0:1
 iface eth0:1 inet static
    address 192.168.80.1
    netmask 255.255.255.0

==~/Desktop/Activate-Orbiter.sh==
*Change "21" to the device number of your OnScreen orbiter
*This can be found by going to Web Admin > Show Devices Tree > Core > The core/hybrid, click on OnScreen Orbiter and look in the black box at the top left of the information displayed
 #!/bin/bash
 /usr/pluto/bin/MessageSend localhost 0 '''21''' 1 912 119 "0"

==~/.kde/Autostart/Set-Volume.sh==
 #!/bin/sh
 amixer sset Front 100% unmute
 amixer sset Surround 100% unmute
 amixer sset Center 100% unmute
 amixer sset LFE 100% unmute
 amixer sset 'Front Mic Boost' 100% unmute
 amixer sset 'Front Mic' 100% unmute
 amixer sset 'Input Source' 'Front Mic'
 amixer sset 'Capture' 100% unmute

==/etc/X11/xorg.conf==
*Options may very depending on your setup and mouse, this is the config for my setup
*The protocol ExplorerPS/2 seems to have the best luck, but auto may work as well

 ...
 Section "InputDevice"
     # generated from default
     Identifier     "Mouse0"
     Driver         "mouse"
     Option         '''"Protocol" "ExplorerPS/2"'''
     Option         "Device" "/dev/psaux"
     Option         "Emulate3Buttons" "no"
     Option         '''"ZAxisMapping" "4 5"'''
     Option         '''"Buttons" "7"'''
     Option         '''"ButtonMapping" "1 2 3 6 7"'''
 EndSection
    ...

==~/.xbindkeysrc==
*b:# is the mouse button, modify according to the functions you want
*use 'xev' to determine the mouse button numbers
*use 'xbindkeys -k' to determine keyboard button codes (they are case-sensitive)
    
 "xte 'keydown F7' &"
   b:2
 "xte 'keyup F7' &"
   b:2+release
 "xte 'keydown Prior' &"
   b:4
 "xte 'keyup Prior' &"
   b:4+release
 "xte 'keydown Next' &"
   b:5
 "xte 'keyup Next' &"
   b:5+release
 "xte 'keydown F6' &"
   b:6
 "xte 'keyup F6' &"
   b:6+release
 "xte 'keydown F8' &"
   b:7
 "xte 'keyup F8' &"
   b:7+release

==/etc/ssmtp/ssmtp.conf==
*Make sure you replace USERNAME and PASSWORD with your Gmail account info
 #
 # Config file for sSMTP sendmail
 #
 # The person who gets all mail for userids < 1000
 # Make this empty to disable rewriting.
 root='''USERNAME'''@gmail.com
 # The place where the mail goes. The actual machine name is required no
 # MX records are consulted. Commonly mailhosts are named mail.domain.com
 mailhub=smtp.gmail.com:587
 UseSTARTTLS=YES
 AuthUser='''USERNAME'''
 AuthPass='''PASSWORD'''
 # Where will the mail seem to come from?
 rewriteDomain=gmail.com
 # The full hostname
 hostname=dcerouter
 # Are users allowed to set their own From: address?
 # YES - Allow the user to specify their own From: address
 # NO - Use the system generated From: address
 FromLineOverride=YES

==~/Desktop/email.sh==
*Replace 5555551234@vtext.com with whatever the equivalent is for your phone carrier, or a normal email address if you don't want text alerts
 #!/bin/bash
 # script to send simple email
 # email subject
 SUBJECT="'''MCE'''"
 # Email To ?
 EMAIL="'''5555551234@vtext.com'''" # This is the text message email setup for verizon, check for your carrier's equivalent
 # Email text/message
 EMAILMESSAGE="/tmp/emailmessage.txt"
 '''echo "Your lights are:">$EMAILMESSAGE
 echo "Off">>$EMAILMESSAGE'''
 # send an email using /bin/mail
 mail -s "$SUBJECT" "$EMAIL" < $EMAILMESSAGE

==/etc/udev/rules.d/95-webcam.rules==
*Modify the vendor and product ID to match that of your camera
 KERNEL=="video*", SYSFS{idVendor}=="'''045e'''", SYSFS{idProduct}=="'''00f8'''", NAME="video5"

==/usr/bin/skype==
 #!/bin/sh
 LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype.real

==~/.devilspie/skype.ds==