View source for Edimax IC1510

{{Versioninfo}}
[[Category: Cameras]]
[[Category: IP Cameras]]

[[Image:IC-1510.jpg|right]]

= Status =
The Edimax IC1510 works with video. 

= Features =
* Browser based
* 10/100mbit LAN
* 30fps max
* Supports high speed hardware-based Motion-JPEG compression
* Supports video resoultion:640x480(VGA),320x240(CIF) and 160x120(QCIF)
* UPnP, DynDNS
* Real-Time Live Video
* Supports Auto Brightness / Contrast / Hue Control
* Built-in manual focus lens

=Edimax Ip Camera and Motion Wrapper=

IP cameras can be used under the Motion Wrapper to enable it to detect motion and alert based on that function.

==To add Motion Wrapper and Edimax Ip Cameras==

'''NOTE: I still need to test the alerts.'''

* Open your [[LinuxMCE Admin Website|webadmin]] control panel and on the left pane at the bottom click on "Show Device Tree".

* In the left pane Click on "core/hybrid".

* On the right pane near the top, click on "Create Child Device", then leave everything blank and click "Pick Device Template" button.

* Click the pull down box under "Device Template" and find the template labeled "Motion Wrapper", select this item and click "Pick Device Template"

* Now on the right pane, click "Create Child Device" again.  Enter your IP Cameras IP address and MAC address here, the MAC address is located on a sticker on the back of the camera, then click "Pick Device Template"

* Click the pull down box under "Device Template" and use "Generic Motion IP Camera", then click "Pick Device Template"

* Now on the right window pane, under Device Info fill in the following
'''PATH:'''  /mjpg/video.mjpg<br>
'''TCP PORT:'''  80<br>
'''USERNAME:'''  <username you assigned><br>
'''PASSWORD:'''  <password you assigned>

* Now click save at the bottom, reload your router, and on your mce interface go to "Security" -> "Generic Motion IP Camera" to see if it's working.
*I had to reboot my server to get it working.