View source for NVidia HDMI Audio on LinuxMCE 1004

==How to setup NVidia HDMI Audio on LinuxMCE 1004==

Add a command in the /usr/pluto/bin/LaunchOrbiter.sh script to let mplayer play a sound-file on startup of the orbiter.
Its the line right below the xset m command 
 ## Run Orbiter
 xset m 2 2
 DISPLAY=:0 mplayer /your/own/yourown.wav
 if [[ "$Valgrind" == *"$Executable"* ]]; then
 	$VGcmd "$Executable" "$@"
 	Orbiter_RetCode=$?
 else
 	"$Executable" "$@"
 	Orbiter_RetCode=$?
 fi

Further:
 apt-get install linux-backports-modules-alsa-`uname -r`
 reboot
This will get them listed (aplay -l | grep -i 'hdmi')

You will likely have hw0 devices 3,7,8, and 9. It is almost always 3 or 7 on the id41, and seems to be completely random which. Others output on 9... others output on everything. Should look something like:

 card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
 card 0: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
 card 0: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
 card 0: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]

You can test with:

 speaker-test -c 2 -l 1 -t sine -D hw:0,7

etc based on the output of aplay where the 0 is the card and 7 is the device.


Now getting that to stick is another trick. In /usr/pluto/templates/asound.conf I would replace %MAIN_CARD% with 0,7    or whatever yours is.

 pcm.asym_hdmi {
        type asym
        playback.pcm "hdmi_playback"
        capture.pcm "plughw:%MAIN_CARD%"
 }


You may also have to add
 options snd-hda-intel model=auto  or
 options snd-hda-intel enable_msi=0 index=-2
to /etc/modprobe.d/alsa-base.conf to place the HDMI audo as card 0. For some reasons, it has to be card 0.

Please report back to L3top with your results.