View source for Bananapi mythtv

Using Raspbian_For_BananaPi_v3.1
http://www.lemaker.org/resources/9-81/raspbian_for_bananapi.html

After installing the image and booting one time I had to use a partition mananger to increase the root partition otherwise all the required packages will not fit.


  apt-get install \
  make gcc git automake autoconf pkg-config libtool dh-autoreconf \
  xserver-xorg-dev \
  libgl1-mesa-dev \
  libgles2-mesa-dev \
  libgles1-mesa-dev \
  xutils-dev \
  x11proto-xf86dri-dev \
  mesa-utils \
  mplayer2 \
  glew-utils \
  libglew-dev \
  libvdpau-dev \
  freeglut3-dev

  apt-get purge libegl1-mesa


  cd $HOME
  git clone https://github.com/robclark/libdri2.git
  git clone https://github.com/linux-sunxi/libump.git
  git clone https://github.com/linux-sunxi/sunxi-mali.git
  git clone https://github.com/ssvb/xf86-video-fbturbo.git

  (I actualy have git clone -b 0.4.0 https://github.com/ssvb/xf86-video-fbturbo.git currently but I doubt that makes a difference )

  ran:
  dpkg-reconfigure locales
  and selected the locale that was failing when running autogen in the next step

  cd $HOME/libdri2
  ./autogen.sh --prefix=/usr
  sudo make install

  cd $HOME/libump
  autoreconf -vi
  ./configure --prefix=/usr
  make
  sudo make install

  cd $HOME/sunxi-mali
  git submodule init
  git submodule update
  make config ABI=armhf VERSION=r3p0
  sudo make install

  cd $HOME/xf86-video-fbturbo
  autoreconf -vi
  ./configure --prefix=/usr
  make
  sudo make install

  mkdir -p /etc/X11/xorg.conf.d/

  vi /etc/X11/xorg.conf.d/99-fbturbo.conf
  -----------------
  Section "Device"
          Identifier      "Allwinner A10/A13 FBDEV"
          Driver          "fbturbo"
          Option          "fbdev" "/dev/fb0"
          Option          "SwapbuffersWait" "true"
          Option          "AccelMethod" "G2D"
  EndSection
  ------------------

  cd $HOME
  git clone https://github.com/linux-sunxi/libvdpau-sunxi.git
  cd $HOME/libvdpau-sunxi
  make
  sudo make install

  modprobe sunxi_cedar_mod

  to run as non root user:
  chmod 666 /dev/ump /dev/mali /dev/disp /dev/g2d /dev/fb* /dev/cedar_dev

  export VDPAU_DRIVER=sunxi
  wget http://babilejo.org/linuxmce/sample.mkv
  mplayer -fs -vo vdpau -vc ffmpeg12vdpau,ffh264vdpau sample.mkv

  ==================
  apt-get update
  apt-get dist-upgrade
  sudo apt-get install qt4-qmake libfreetype6-dev libmp3lame-dev libqt4-dev libxxf86vm-dev libxinerama-dev libasound2-dev pkg-config uuid-dev libtag1-dev libgexiv2-dev

  cd $HOME
  git clone git://github.com/MythTV/mythtv.git
  cd $HOME/mythtv/mythtv
  ./configure
  make -j 2
  make install

  set vdpau normal in playback profiles
  set the audio output

  #!/bin/sh
  sudo modprobe sunxi_cedar_mod
  export VDPAU_DRIVER=sunxi
  export VDPAU_OSD=1
  sudo chmod 666 /dev/ump /dev/mali /dev/disp /dev/g2d /dev/fb* /dev/cedar_dev
  mythfrontend