View source for D-Link DCS-920

{{Versioninfo}}
[[Category: IP Cameras]]

[[Image:DCS-70.jpg|right]]

=== Status ===
The D-Link DCS-920 works for video, but zoom is not yet implemented.


;Note: I had to set my camera to 640X480 to avoid losing the connection every 1-2 minutes.

{{p}}

=== Features ===
* Browser based
* 802.11g WLAN
* 10/100mbit LAN
* 30fps max
* active motion detector
* MPEG4 compression
* UPnP, DynDNS
* Real-Time Live Video
* compatible with DCS-70 outdoor mount

{{p}}

== Adding IP Cameras and Motion Wrapper ==

IP cameras can be used under the Motion Wrapper to enable it to detect motion and alert based on that function.


=== Add Motion Wrapper ===

* Open your [[LinuxMCE Admin Website|webadmin]] control panel and on the left pane at the bottom click on '''Show Device Tree'''.
* In the left pane Click on '''core/hybrid'''.
* On the right pane near the top, click on '''Create Child Device''', then leave everything blank and click '''Pick Device Template''' button.
* Click the pull down box under ''Device Template'' and find the template labeled '''Motion Wrapper''', select this item and click '''Pick Device Template'''

{{p}}

=== Add IP Camera as child of the Motion Wrapper ===
* Now on the right pane, click '''Create Child Device''' again.  Enter your IP Cameras IP address and MAC address here, then click '''Pick Device Template'''
* Click the pull down box under ''Device Template'' and use '''Generic Motion IP Camera''', then click '''Pick Device Template'''
* Now on the right window pane, under '''Device Info''' fill in your camera's MAC address, it is located on a sticker on the back of the camera.
* Still on the right window pane, scroll down to '''Device Data''' and fill in the following:


:::'''PATH:'''  /VIDEO.CGI<br>
:::'''TCP PORT:'''  80<br>
:::'''USERNAME:'''  <username you assigned><br>
:::'''PASSWORD:'''  <password you assigned>

{{p}}

== Checking for video ==
* Now click save at the bottom, RESTART your router
* on your mce interface, go to '''Security''' -> '''Generic Analog Camera''' to see if it's working.

{{p}}