View source for Medion MD1 NBC

[[Category: Hardware]]
{{versioninfo}}
[[Category: Input]]
===Medion MD1 NBC===
[[Image:Medion-MD1-NBC.jpg|Medion MD1 NBC RF Remote Control]]

Medion MD1 NBC (Made in China by X10) is a RF Remote Controler.

It has all (almost) what you need to control your LinuxMCE.
It uses 2 x 1.5V AAA batteries.
*P/N: 20018268
*FCC ID: B4S20018268

I`ve got it along with KNC ONE TV-Station DVR analog tv tuner card.

===X10 Receiver===
The X10 RF receiver need to be connected directly into the mainboard USB pin.

*P/N: 20018267

Technical Specification:

It has CE mark so it is approved for use in the EU.
*RF Frequency: 433 MHz
*Operating range: 30m or 60feet  (open field)
*Can support up to 16 remotes
*Works through walls using RF technology even when not aimed at the receiver

===Setup===
The device works with LMCE using LIRC. I`ve configured my device using [[Add_support_for_new_remote_controls]] guide.

'''Note:'''LinuxMCE will automatically load '''ati_remote''' kernel module which doesn`t seem to work.
You need to prevent doing this by either doing

<code> 
echo "blacklist ati_remote" >>/etc/modprobe.d/blacklist<br>
</code>
as root or deleting the module.

My [[Medion-MD1-NBC-lirc.conf|lircd.conf]].