View source for User:JaseP

=JaseP's User Set-up=
This page describes my LinuxMCE 10.04 system setup. Excuse the dust while I improve the page. I am located in Eastern Pennsylvania (USA), in a cable TV rich region (in/near the birthplace of cable television). I am a Linux/Open Source enthusiast and (amateur) advocate, having been a Linux user for 10+ years.

==Network Environment==
Micasaverde Vera (external router/primary Z-wave controller) --> Core (LinuxMCE services, incl. DHCP, DCE router, Secondary Z-wave controller, External Hard Drives, Telephony) --> Wired/Wireless Access Points (DHCP server disabled & provided by the Core) --> Media Directors, Orbiters & non-LinuxMCE devices

[[File:JaseP_Lmce_TopMap.png]]

==Hardware==
Core (currently configured as a Core/Hybrid):
:System Software: LinuxMCE 10.04 (net install)
:Intel Dual Core w/ Intel GMA graphics
:4GB RAM
:2 NICs (one internal, one add-in card)
:320 GB HD
:2 HDhomeruns (network attached tuners)

Media Directors:
:2 Dell Studio Hybrids (Intel Dual Core & 2 & 4 GB RAM, Intel graphics)
:EEE Box 202 (Intel Atom N270, Intel graphics)
::Note: all MDs use Rii Trackpad/Keyboards with IR remote (not Bluetooth models)

Displays:
:Sanyo LCD Televisions, 32-42" (3 currently configured, 2 using VGA, 1 using HDMI)
:1 discount brand 14" TV with VGA for LinuxMCE Core display 

External Storage:
:Seagate 1 TB USB HD
:2 Western Digital 320GB Hard Drives (USB)

Z-wave:
:Micasaverde Vera vers. 1 (with Aeon Labs USB Z-wave inclusion controller)
:2nd Aeon Labs USB Z-wave inclusion controller (for the Core)
:2 Z-wave thermostats
:4 in-wall Z-wave dimmers
:4 Z-wave appliance modules
:3 Schlage Z-wave door locks
:1 Z-wave multi-sensor
:1 plug-in Z-wave scene controller
:1 Wayne Dalton Z-wave enabled remote control
:Panasonic IP camera (wired -- included here because it is controlled by the MCV Vera) 

Networking:
:Micasaverde Vera (WiFi access point disabled)
:2 Linksys Wireless/Wired Routers
:2 Linksys 4-port (5 ports, 4 useable) switches

Telephony:
:Obi110 ATA (not configured)
:Linksys/Cisco SPA3102 ATA (not installed or configured)

Orbiters:
:Web Orbiter(s) -- presently need reconfiguration

==Notes==
This is a rough outline at present, and will be fleshed out later with diagrams, links, setup details, etc. Please excuse the dust.