VoIP with XS4ALL - Revision history

Zaerc at 13:58, 18 October 2010

2010-10-18T13:58:15Z

←Older revision		Revision as of 13:58, 18 October 2010
Line 1:		Line 1:
			[[Category: VoIP]]
			[[Category: Telecom]]
			[[Category: Phone Lines]]
			[[Category: Tutorials]]

	The internet provider [http://www.xs4all.nl XS4ALL] (in dutch) gives it's customers 2 [http://www.xs4all.nl/allediensten/voip/ VoIP] lines free of charge, with the option to be able to make outbound calls to phone numbers worldwide.		The internet provider [http://www.xs4all.nl XS4ALL] (in dutch) gives it's customers 2 [http://www.xs4all.nl/allediensten/voip/ VoIP] lines free of charge, with the option to be able to make outbound calls to phone numbers worldwide.

Line 35:		Line 40:

	When you see the status '''Registered''' followed by a date and time you should be able to make and receive calls.		When you see the status '''Registered''' followed by a date and time you should be able to make and receive calls.


	~~[[Category: Telecom]]~~
	~~[[Category: Phone Lines]]~~
	~~[[Category: Tutorials]]~~
	~~[[Category: VOIP Setups]]~~

Langstonius at 23:03, 11 June 2008

2008-06-11T23:03:22Z

←Older revision		Revision as of 23:03, 11 June 2008
Line 40:		Line 40:
	[[Category: Phone Lines]]		[[Category: Phone Lines]]
	[[Category: Tutorials]]		[[Category: Tutorials]]
	[[Category: ~~Voip~~ Setups]]		[[Category: VOIP Setups]]

Langstonius at 23:02, 11 June 2008

2008-06-11T23:02:54Z

←Older revision		Revision as of 23:02, 11 June 2008
Line 40:		Line 40:
	[[Category: Phone Lines]]		[[Category: Phone Lines]]
	[[Category: Tutorials]]		[[Category: Tutorials]]
			[[Category: Voip Setups]]

Zaerc: woops N != 1-9, but 2-9 (changed N to Z)

2008-03-07T04:25:57Z

woops N != 1-9, but 2-9 (changed N to Z)

←Older revision		Revision as of 04:25, 7 March 2008
Line 22:		Line 22:
	112		112
	'''020'''+XXXXXXX		'''020'''+XXXXXXX
	~~0NXXXXXXXX~~		0ZXXXXXXXX
	0031\|0+.		0031\|0+.
	9\|.		9\|.

Zaerc: VOIP with XS4All moved to VoIP with XS4ALL: properly capitalized

2008-03-01T19:31:25Z

VOIP with XS4All moved to VoIP with XS4ALL: properly capitalized

←Older revision	Revision as of 19:31, 1 March 2008
(No difference)

Zaerc: dotting a few eyes

2008-01-28T01:52:01Z

dotting a few eyes

←Older revision		Revision as of 01:52, 28 January 2008
Line 5:		Line 5:
	Note that this procedure has been tested on 0710 Beta3, it is probably similar under 0704.		Note that this procedure has been tested on 0710 Beta3, it is probably similar under 0704.

	# Go in the web admin page (see [[Logging In]]) to '''Wizard > Devices > Phone Lines'''		# Go in the web admin page (see [[Logging In]]) to ''Wizard > Devices > Phone Lines''.
	## Check ''When dialing a local number, automatically prepend the area code'' and specify the areacode you would like to have prepended when dialing a local number, for instance in Rotterdam 010, Amsterdam 020, etc. (this is optional).		## Check ''When dialing a local number, automatically prepend the area code'' and specify the areacode you would like to have prepended when dialing a local number, for instance in Rotterdam 010, Amsterdam 020, etc. (this is optional).
	## Uncheck ''Also prepend a digit (1 for US/Canada, 0 for Europe)'' (also optional).		## Uncheck ''Also prepend a digit (1 for US/Canada, 0 for Europe)'' (also optional).
Line 16:		Line 16:
	## ''Host'' '''sip.xs4all.nl'''		## ''Host'' '''sip.xs4all.nl'''
	# Hit the ''Submit'' button.		# Hit the ''Submit'' button.
	# Hit the ''Deactivate Automatic Configuration'' button.		# Hit the ''Deactivate Automatic Configuration'' button, and the following ''Yes'' button.
	~~# Hit~~ the ''Yes'' button.		# Click the ''click here'' link (next to "Manual configuration activated. To configure AMP, click")
	# Click the ''click here'' link (next to ''Manual configuration activated. To configure AMP, click'')
	# Click ''Trunks'', and ''Trunk SIP/sipgate''		# Click ''Trunks'', and ''Trunk SIP/sipgate''
	# Under "Outgoing Dial Rules" change ''Dial Rules'' to (adjust the '''020''' to your own area prefix if you're not in Amsterdam):		# Under "Outgoing Dial Rules" change ''Dial Rules'' to (adjust the '''020''' to your own area prefix if you're not in Amsterdam):
Line 26:		Line 25:
	0031\|0+.		0031\|0+.
	9\|.		9\|.
	## This will recognize 112 the emergency number.		## This will recognize 112, the emergency number.
	## Seven digit local numbers will get 020 prepended.		## Seven digit local numbers will get 020 prepended.
	## Long distance numbers, 10 digits starting with a zero followed by a non-zero digit.		## Long distance numbers, 10 digits starting with a zero followed by a non-zero digit.
Line 33:		Line 32:
	# You now can (optionally) modify other settings to your liking as well, however do NOT change the ''Trunk Name'' (leave it at the default '''sipgate'''). When done hit ''Submit Changes''.		# You now can (optionally) modify other settings to your liking as well, however do NOT change the ''Trunk Name'' (leave it at the default '''sipgate'''). When done hit ''Submit Changes''.
	# Click ''Reload Required Apply Configuration Changes'' and ''Continue with reload''.		# Click ''Reload Required Apply Configuration Changes'' and ''Continue with reload''.
	# Go back to '''Wizard > Devices > Phone Lines''' and hit the ''Activate Automatic Configuration'' button, followed by the ''Yes and keep my advanced settings'' button.		# Go back to ''Wizard > Devices > Phone Lines'' and hit the ''Activate Automatic Configuration'' button, followed by the ''Yes and keep my advanced settings'' button.

	When you see the status '''Registered''' followed by a date and time you should be able to make and receive calls.		When you see the status '''Registered''' followed by a date and time you should be able to make and receive calls.

Zaerc: completely updated

2008-01-28T01:43:48Z

completely updated

←Older revision		Revision as of 01:43, 28 January 2008
Line 3:		Line 3:
	Before you start you need to have activated your [http://www.xs4all.nl/allediensten/voip/activeren.php XS4All VoIP number]. As you will need the account details further on, replace '''<08787.....>''' with your own phone number and '''<password>''' with the password for that number.		Before you start you need to have activated your [http://www.xs4all.nl/allediensten/voip/activeren.php XS4All VoIP number]. As you will need the account details further on, replace '''<08787.....>''' with your own phone number and '''<password>''' with the password for that number.

	~~1. Go to the web admin page (type your core's IP in a browser) and from the upper menu~~, ~~choose '''Advanced > Configuration > Phones setup''', you should see the Asterisk Management Portal (AMP) welcome page now~~.		Note that this procedure has been tested on 0710 Beta3, it is probably similar under 0704.

	~~2. Choose~~ '''~~Setup~~''', a ~~menu appears~~, ~~goto~~ '''~~Trunks~~''' ~~and select Add SIP Trunk~~.		# Go in the web admin page (see [[Logging In]]) to '''Wizard > Devices > Phone Lines'''
			## Check ''When dialing a local number, automatically prepend the area code'' and specify the areacode you would like to have prepended when dialing a local number, for instance in Rotterdam 010, Amsterdam 020, etc. (this is optional).
	~~- General Settings -~~		## Uncheck ''Also prepend a digit (1 for US/Canada, 0 for Europe)'' (also optional).
			## ''Local Number Length'' '''7''' (the default).
	~~Outbound Caller ID:~~ '''''~~<08787.....>~~'''''		# Hit the ''Update'' button.
	~~Maximum channels:~~		# ''Choose provider'' '''sipgate (try for free, pay as you go)'''
			## ''Username'' '''<08787.....>'''
			## ''Password'' '''<password>'''
	~~- Outgoing Dial Rules -~~		## ''Phone number'' '''<08787.....>'''
			## ''Host'' '''sip.xs4all.nl'''
	~~Dial Rules:~~		# Hit the ''Submit'' button.
	'''''~~020~~'''~~+ZXXXXXX~~''		# Hit the ''Deactivate Automatic Configuration'' button.
	''~~0ZXXXXXXXX~~''		# Hit the ''Yes'' button.
	''~~0+0031\|ZXXXXXXXX~~''		# Click the ''click here'' link (next to ''Manual configuration activated. To configure AMP, click'')
	''~~00ZXXXXXXXXXX~~''		# Click ''Trunks'', and ''Trunk SIP/sipgate''
	~~Outbound Dial Prefix:~~		# Under "Outgoing Dial Rules" change ''Dial Rules'' to (adjust the '''020''' to your own area prefix if you're not in Amsterdam):
			112
			'''020'''+XXXXXXX
	~~- Outgoing Settings -~~		0NXXXXXXXX
			0031\|0+.
	~~Trunk Name:~~ ''~~xs4all''~~		9\|.
	~~PEER Details:~~		## This will recognize 112 the emergency number.
	~~''host=sip.xs4all.nl~~''		## Seven digit local numbers will get 020 prepended.
	''~~secret=~~'''<password>'''''		## Long distance numbers, 10 digits starting with a zero followed by a non-zero digit.
	''~~type=peer~~''		## International numbers to the Netherlands get 0031 stripped and a 0 prepended instead.
	~~''username=~~'''<08787.....>'''''		## A nine will dial out no matter how many digits.
			# You now can (optionally) modify other settings to your liking as well, however do NOT change the ''Trunk Name'' (leave it at the default '''sipgate'''). When done hit ''Submit Changes''.
			# Click ''Reload Required Apply Configuration Changes'' and ''Continue with reload''.
	~~- Incoming Settings -~~		# Go back to '''Wizard > Devices > Phone Lines''' and hit the ''Activate Automatic Configuration'' button, followed by the ''Yes and keep my advanced settings'' button.

	~~USER Context: xs4all-in~~
	~~USER Details:~~
	''~~allow=g723&g729&alaw&ulaw~~''
	''~~context=from-pstn~~''
	''~~disallow=all~~''
	''~~externip=~~'''~~<your-ip>~~'''''
	''~~fromdomain=sip~~.~~xs4all.nl~~''
	''~~fromuser=~~''~~'08787.....'~~''''
	''~~host=sip.xs4all.nl~~''
	''~~insecure=very~~''
	''~~nat=yes'~~'
	''~~port=5060~~''
	''~~qualify=~~no''
	''~~restricted=no~~''
	''~~secret=~~'''~~<password>~~'''''
	''~~type=friend~~''
	''~~username=~~'''~~08787~~.~~....'''''~~


	~~- Registration -~~

	~~Register String:~~ '''''~~<08787.....>~~''':'''~~<password>~~'''~~@sip~~.~~xs4all.nl''~~

	~~3. Hit~~ the ~~submit button and proceed to~~ '''~~Outbound Routing~~'''.		When you see the status '''Registered''' followed by a date and time you should be able to make and receive calls.

	~~Route Name: ''VoIP''~~
	~~Route Password:~~

	~~Dial Patterns:~~
	~~''0031\|ZXXXXXXXX''~~
	~~''ZXXXXXX''~~
	~~Trunk Sequence:~~
	~~''SIP/xs4all''~~

	~~4. Click '''You have made changes - when finished, click here to APPLY them''' (in the red bar near the top of the page) after which~~ you should be able to make and receive calls ~~using your XS4ALL VoIP number.~~


	I am not 100% sure whether this is the right setup for LinuxMCE, so if there is a better way or anything else is wrong then please update this page or leave a message in the [http://forum.linuxmce.com/index.php?topic=1876.msg8515#msg8515 Adding voip phone lines not on the providers list] thread on the forum.

Zaerc: forgot a codec

2007-10-24T00:50:25Z

forgot a codec

←Older revision		Revision as of 00:50, 24 October 2007
Line 37:		Line 37:
	USER Context: xs4all-in		USER Context: xs4all-in
	USER Details:		USER Details:
	''allow=~~alaw~~&g729&~~g723~~		''allow=g723&g729&alaw&ulaw''
	''context=from-pstn		''context=from-pstn''
	''disallow=all		''disallow=all''
	''externip='''<your-ip>'''		''externip='''<your-ip>'''''
	''fromdomain=sip.xs4all.nl		''fromdomain=sip.xs4all.nl''
	''fromuser='''08787.....'''		''fromuser='''08787.....'''''
	''host=sip.xs4all.nl''		''host=sip.xs4all.nl''
	''insecure=very''		''insecure=very''

Zaerc: a few days after updating this page, my phone stopped working so I went back to the old settings

2007-10-07T17:20:50Z

a few days after updating this page, my phone stopped working so I went back to the old settings

←Older revision		Revision as of 17:20, 7 October 2007
Line 35:		Line 35:
	- Incoming Settings -		- Incoming Settings -

	USER Context: xs4all-in		USER Context: xs4all-in
	USER Details:		USER Details:
	''allow=alaw&g729&g723		''allow=alaw&g729&g723
	''context=from-pstn		''context=from-pstn
	''disallow=all		''disallow=all
			''externip='''<your-ip>'''
			''fromdomain=sip.xs4all.nl
			''fromuser='''08787.....'''
			''host=sip.xs4all.nl''
			''insecure=very''
			''nat=yes''
			''port=5060''
			''qualify=no''
			''restricted=no''
			''secret='''<password>'''''
	''type=friend''		''type=friend''
			''username='''08787.....'''''


Line 65:		Line 76:

	[[Category: Telecom]]		[[Category: Telecom]]
	[[Category: ~~Phones~~]]		[[Category: Phone Lines]]
	[[Category: Tutorials]]		[[Category: Tutorials]]

Zaerc: cleaned up/improved/verified

2007-09-20T20:04:46Z

cleaned up/improved/verified

←Older revision		Revision as of 20:04, 20 September 2007
Line 1:		Line 1:
	The internet provider [http://www.xs4all.nl ~~XS4All~~] (in dutch) gives it's customers 2 [http://www.xs4all.nl/allediensten/voip/ ~~VOIP~~] lines free of charge, with the option to be able to make outbound calls to phone numbers worldwide.		The internet provider [http://www.xs4all.nl XS4ALL] (in dutch) gives it's customers 2 [http://www.xs4all.nl/allediensten/voip/ VoIP] lines free of charge, with the option to be able to make outbound calls to phone numbers worldwide.

	Before you start you need to have activated your [http://www.xs4all.nl/allediensten/voip/activeren.php XS4All ~~VOIP~~ number]. As you will need the account details further on, replace '''08787.....''' with your own phone number, '''<password>''' with the password for that ~~number and '''<your-ip>''' with your external ip-~~number.		Before you start you need to have activated your [http://www.xs4all.nl/allediensten/voip/activeren.php XS4All VoIP number]. As you will need the account details further on, replace '''<08787.....>''' with your own phone number and '''<password>''' with the password for that number.

	1. Go to the web admin page (type your core's IP in a browser) and from the upper menu, choose Advanced / Configuration / Phones setup, you should see the ~~AMP (~~Asterisk Management Portal) welcome page now.		1. Go to the web admin page (type your core's IP in a browser) and from the upper menu, choose '''Advanced > Configuration > Phones setup''', you should see the Asterisk Management Portal (AMP) welcome page now.

	2. Choose Setup, a menu appears, goto Trunks and select Add SIP Trunk.		2. Choose '''Setup''', a menu appears, goto '''Trunks''' and select Add SIP Trunk.

	- General Settings -		- General Settings -

	Outbound Caller ID: '''''08787.....'''''		Outbound Caller ID: '''''<08787.....>'''''
	Maximum channels:		Maximum channels:

Line 16:		Line 16:

	Dial Rules:		Dial Rules:
	'''''020~~+NXXXXXX~~'''''		'''''020'''+ZXXXXXX''
	''~~0NXXXXXXXX~~''		''0ZXXXXXXXX''
	''0+0031\|~~NXXXXXXXX~~''		''0+0031\|ZXXXXXXXX''
	''~~00NXXXXXXXXXX~~''		''00ZXXXXXXXXXX''
	Outbound Dial Prefix:		Outbound Dial Prefix:

Line 30:		Line 30:
	''secret='''<password>'''''		''secret='''<password>'''''
	''type=peer''		''type=peer''
	''username='''08787.....'''''		''username='''<08787.....>'''''


Line 38:		Line 38:
	USER Details:		USER Details:
	''allow=alaw&g729&g723		''allow=alaw&g729&g723
	''context=from-~~trunk~~		''context=from-pstn
	''disallow=all		''disallow=all
	~~''externip='''<your-ip>'''~~
	~~''fromdomain=sip.xs4all.nl~~
	~~''fromuser='''08787.....'''~~
	~~''host=sip.xs4all.nl''~~
	~~''insecure=very''~~
	~~''nat=yes''~~
	~~''port=5060''~~
	~~''qualify=no''~~
	~~''restricted=no''~~
	~~''secret='''<password>'''''~~
	''type=friend''		''type=friend''
	~~''username='''08787.....'''''~~


	- Registration -		- Registration -

	Register String: '''''08787.....:<password>@sip.xs4all.nl~~'''~~''		Register String: '''''<08787.....>''':'''<password>'''@sip.xs4all.nl''

	~~I'm not sure whether all of these are necessary (or even the ''right way'' of doing things) but it works for me.~~		3. Hit the submit button and proceed to '''Outbound Routing'''.


	3. Hit the submit button and proceed to ~~Inbound Routing, pick~~ '''~~anything but NOT''~~': ''~~'''Use 'Incoming Calls' settings''''' for Set Destination (see below). And hit submit again, then you need to click the red bar near the top of the page to appy the changes~~.

			Route Name: ''VoIP''
			Route Password:

			Dial Patterns:
			''0031\|ZXXXXXXXX''
			''ZXXXXXX''
			Trunk Sequence:
			''SIP/xs4all''

	You should be able to make and receive calls using your ~~XS4All VOIP~~ number ~~now~~.		4. Click '''You have made changes - when finished, click here to APPLY them''' (in the red bar near the top of the page) after which you should be able to make and receive calls using your XS4ALL VoIP number.


	I am not 100% sure whether this is the right setup for LinuxMCE, ~~especially about the inbound routing using the predefined ''from-trunk'' and the loop it seems to create when using the ''Use 'Incoming Calls' settings''. If~~ there is a better way or anything else is wrong then please update this page or leave a message in the		I am not 100% sure whether this is the right setup for LinuxMCE, so if there is a better way or anything else is wrong then please update this page or leave a message in the [http://forum.linuxmce.com/index.php?topic=1876.msg8515#msg8515 Adding voip phone lines not on the providers list] thread on the forum.
	[http://forum.linuxmce.com/index.php?topic=1876.msg8515#msg8515 Adding voip phone lines not on the providers list] thread on the forum.

	~~----~~
	NB. By examining the automaticly generated setup for "sipgate", I noticed that it uses ''context=from-internal'' in the ''Incoming Settings'' so that might be more suitable. I'll try that the next time around and update this page accordingly.
	~~----~~

	[[Category: Telecom]]		[[Category: Telecom]]
	[[Category: Phones]]		[[Category: Phones]]
	[[Category: Tutorials]]		[[Category: Tutorials]]