Difference between revisions of "Hauppauge Nova-HD-S2"
| Line 1: | Line 1: | ||
[[Category: Video]] | [[Category: Video]] | ||
[[Category: TV Cards]] | [[Category: TV Cards]] | ||
| + | [[Image:http://www.hauppauge.co.uk/pics/novahds2_top.jpg]] | ||
| − | |||
Digital satellite TV and radio for your PC. Watch free-to-air satellite TV, in a window or full screen on your PC! | Digital satellite TV and radio for your PC. Watch free-to-air satellite TV, in a window or full screen on your PC! | ||
| Line 11: | Line 11: | ||
Includes Hauppauge new IR remote control, for easy control of TV watching, record and play functions. | Includes Hauppauge new IR remote control, for easy control of TV watching, record and play functions. | ||
| + | |||
| + | |||
| + | == '''Driver Information''' == | ||
| Line 18: | Line 21: | ||
Unfortunately, the current version of VDR does not support HD / DVB-S2 (as of LMCE 0710). The driver listed here only gets the DVB-S element running. In later versions of LMCE this will become obsolete, particularly when later versions of VDR are used. The experimental VDR 0.7.X will only work using Multiproto drivers, but these will support the DVB-S2 element of this card. | Unfortunately, the current version of VDR does not support HD / DVB-S2 (as of LMCE 0710). The driver listed here only gets the DVB-S element running. In later versions of LMCE this will become obsolete, particularly when later versions of VDR are used. The experimental VDR 0.7.X will only work using Multiproto drivers, but these will support the DVB-S2 element of this card. | ||
| − | Download the patched v4l-dvb driver from [ | + | |
| + | |||
| + | == '''Installing The Drivers and Firmware''' == | ||
| + | |||
| + | |||
| + | |||
| + | Download the patched v4l-dvb driver from [http://www.file-upload.net/download-434453/hvr4000-ce31158b75ae.tar.gz.html here] | ||
| Line 60: | Line 69: | ||
| − | + | ||
| + | == '''Scan for Channels''' == | ||
| + | |||
| + | |||
| + | |||
| + | see [http://wiki.linuxmce.org/index.php/VDR here] for the VDR wiki | ||
Revision as of 13:24, 2 July 2008
File:Http://www.hauppauge.co.uk/pics/novahds2 top.jpg
Digital satellite TV and radio for your PC. Watch free-to-air satellite TV, in a window or full screen on your PC!
Record digital satellite TV to your PC's hard disk in original MPEG-2 quality. Digital TV recordings will typically take 1,5 Gigabytes of disk space per hour.
Pause digital satellite TV with instant replay.
Listen to digital satellite DVB-S/DVB-S2 radio.
DiSEqC 1.0 support.
Includes Hauppauge new IR remote control, for easy control of TV watching, record and play functions.
Driver Information
The DVB-S element on this card has run successfully on LMCE 0710 using VDR.
Unfortunately, the current version of VDR does not support HD / DVB-S2 (as of LMCE 0710). The driver listed here only gets the DVB-S element running. In later versions of LMCE this will become obsolete, particularly when later versions of VDR are used. The experimental VDR 0.7.X will only work using Multiproto drivers, but these will support the DVB-S2 element of this card.
Installing The Drivers and Firmware
Download the patched v4l-dvb driver from here
Change into the downloaded directory, and open up a konsole. Type:
make
sudo make install
Now fetch the firmware:
wget ftp://167.206.143.11/outgoing/Oxford/88x_2_119_25023_WHQL.zip
unzip:
unzip -jo 88x_2_119_25023_WHQL.zip Driver88/hcw88bda.sys
and put it in place:
dd if=hcw88bda.sys of=/lib/firmware/dvb-fe-cx24116.fw skip=81768 bs=1 count=32522
now reboot, and check that the card has loaded
dmesg | grep cx88
you should get an output stating "hvr-4000-lite / Nova-HD-S2" somewhere.
Scan for Channels
see here for the VDR wiki
Instead of the scan command used in the VDR wiki I used:
scan -o vdr .kde/share/apps/kaffeine/dvb-s/Astra-28.2E > channels.conf
Where my satellite is Astra-28.2E (the BSkyB (Sky-tv-uk) satellite)
To scan free-to-air channels only add an "-x 0" in the command. e.g.
scan -x 0 -o vdr .kde/share/apps/kaffeine/dvb-s/Astra-28.2E > channels.conf
Add the created channels.conf to VDR in the LMCE admin / advanced / configuration / VDR setup as per the VDR wiki
