|
|
| (52 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | [[category:User Setups]]
| + | this page can be deleted, thanks. |
| − | [[category:Standard Definition Setups]]
| + | |
| − | [[category:X10 User Setups]]
| + | |
| − | [[category:Networking Setups]]
| + | |
| − | ==About Me==
| + | |
| − | First, a brief history:
| + | |
| − | | + | |
| − | Hello. My name is Gerald Freymann and I live in Ontario, Canada.
| + | |
| − | | + | |
| − | I first attempted a LinuxMCE installation in March 2008, using 7.10 B4. My core machine worked like crap, one media director was OK but had a bad PVR card and the second media director caused me grief with the video card and I gave up, rather frustrated, confused and extremely disappointed.
| + | |
| − | | + | |
| − | Afterwards, I set up a 3 station MythBuntu system in a day, and have been tinkering with it and learning more about MythTV since then. I'm happy to say that I was able to get my MCE Transceivers working under MythBuntu. See: [http://ubuntuforums.org/showthread.php?p=4527005#post4527005]
| + | |
| − | | + | |
| − | I then tinkered with the X10 equipment I bought but never got to use with LinuxMCE, and quite happily, did very well integrating X10 under MythBuntu both through on-screen menus and remote buttons. See: [http://ubuntuforums.org/showthread.php?p=4733977#post4733977]
| + | |
| − | | + | |
| − | From MythBuntu 7.10 to 8.04, I've enjoyed the system and I've learned a heck of lot more! but have been keeping tabs on LinuxMCE, as it was my system of choice in the first place, I just needed another way to play with it without pressure or time constraints.
| + | |
| − | | + | |
| − | So, in mid-May I purchased yet another system that I figured would replace the MythBuntu core, but before I did that, I wanted to load LinuxMCE 7.10 RC2 on it, just to see how things have progressed since the 7.10 B4. I was very fortunate this time around, as things just worked! I freely goofed around, not caring if the system came crashing down, and other than tinkering with network cards that caused a fresh reload, this version just seems to work.
| + | |
| − | | + | |
| − | Now I'm thinking the new box will become my new LinuxMCE Hybrid/Core and I'll change the other two stations over to LinuxMCE, and be where I wanted to be a few months ago. Kewl!
| + | |
| − | | + | |
| − | I thought I would take this opportunity to document what equipment I am using, and what worked, and what didn't.
| + | |
| − | | + | |
| − | ==System==
| + | |
| − | Prices are in CDN Funds and most don't include shipping, taxes or mail-in rebates.
| + | |
| − | | + | |
| − | ===Core===
| + | |
| − | '''Hybrid/Core -- June 2008 -- WORKS!'''
| + | |
| − | | + | |
| − | *$279.99 -> AMD Athlon 64 X2 Dual Core 4600+ Socket AM2
| + | |
| − | *1 x AMD Original AM2 CPU Fan (a little noisy, not too bad)
| + | |
| − | *1 x ECS nVidia GeForce6100SM-M Motherboard
| + | |
| − | *2GB DDR II 667 Memory 240 Pin (Kingston?)
| + | |
| − | *1 x LG 20X IDE DVD RW + Dual Layer optical drive
| + | |
| − | *disabled on-board nVidia GeForce 6100 as I couldn't use VGA output
| + | |
| − | *Realtek ALC660 6-channel HD Audio
| + | |
| − | *Onboard 10/100 Network Card (connected to my main wired/wireless Linksys Router, which is connected to DSL modem)
| + | |
| − | *6 x USB 2.0 Port, 1 Parallel, 1 Serial
| + | |
| − | *1285 Deluxe Black Tower Case
| + | |
| − | *450 Watt Power Supply
| + | |
| − | *$ 99.99 -> Hitachi 500GB Serial ATA HD, 7200/16MB/SATA-3G (Main OS and initial installation on here)
| + | |
| − | *$ 79.99 -> WD Caviar 500GB Serial ATA HD 7200/16MB/SATA-3G (Media drive in LMCE file structure)
| + | |
| − | *$ 24.99 -> D-Link DGE-530T 10/100/1000 Mbps PCI Network Adapter (for the inside Network)
| + | |
| − | *$ 48.99 -> EVGA GeForce 7200 GS 256MB (will take up to 512MB) PCIe Video card
| + | |
| − | *$ 45.00 -> TP-Link TL-SG1008D 8-Port Gigabit Ethernet Switch (connected to internal nic in Core, rest of the internal LAN connects here)
| + | |
| − | *$ 58.83 -> USB-UIRT
| + | |
| − | *$ 69.59 -> Gyration Motion Sensing Remote Control (GYR3101US)
| + | |
| − | | + | |
| − | ===Networking===
| + | |
| − | '''-> various additional network cabling'''
| + | |
| − | | + | |
| − | *$17.99 -> 2 x 25 FT CAT5e 5e Computer Ethernet Network Internet Cable
| + | |
| − | *$ 6.99 -> 50 FT CAT5e CAT 5e Computer Ethernet PS3 Internet Cable
| + | |
| − | *$ 6.99 -> 25 FT 8M CAT 6 Network Patch Cable
| + | |
| − | *$ 3.99 -> 10 FT CAT5e 5e Computer Ethernet Network Internet Cable
| + | |
| − | | + | |
| − | ===Automation===
| + | |
| − | '''-> various X10 equipment'''
| + | |
| − | *$46.09 RCA X10 ActiveHome PC Interface (CM11A)
| + | |
| − | *6 x dimmable lamp modules (LM465)
| + | |
| − | *2-way transceriver module (RR501)
| + | |
| − | *$42.70 -> KR22A, LM15A, AM466, WS12A
| + | |
| − | | + | |
| − | | + | |
| − | ===In development===
| + | |
| − | '''-> Newly ordered, but not yet here'''
| + | |
| − | | + | |
| − | *$117.66 -> 2 x USB-UIRTS (sold my original 2, had to buy 2 more)
| + | |
| − | *$139.18 -> 2 x Gyration Motion Sensing Remote Control
| + | |
| − | *
| + | |
| − | | + | |
| − | These items have arrived and one each is installed on my hyrbid/core (basement) and living-room media directory.
| + | |
| − | | + | |
| − | ===Media Director===
| + | |
| − | '''MEDIA DIRECTOR -- March 2008 -- WORKS!'''
| + | |
| − | | + | |
| − | *$169.99 -> AMD Athlon 64 X2 Dual Core 4200+ Socket AM2
| + | |
| − | *AMD Original AM2 CPU Fan
| + | |
| − | *ECS nVidia GeForce6100-SM-M Motherboard
| + | |
| − | *1GB DDR II 667 Memory 240 Pin (Kingston)
| + | |
| − | *nVidia GeForce 6100 2D/3D Graphic Engine, up to 256MB Memory (disabled in favour on PCIe Video card)
| + | |
| − | *Realtek ALC660 6-channel HD Audio
| + | |
| − | *Onboard 10/100 Network Card (connected to Gigabit Ethernet Switch)
| + | |
| − | *6 USB 2.0 Port, 1 Parallel, 1 Serial
| + | |
| − | *1285 Deluxe Black Tower Case
| + | |
| − | *450 Watt Power Supply
| + | |
| − | *$121.99 -> Hauppauge WINTV-PVR-150 MCE BNDL MPEG2 w/REMOTE
| + | |
| − | *$ 39.99 -> Logitech Cordless Desktop EX110 (keyboard/mouse)
| + | |
| − | *$ 54.99 -> EVGA GeForce 72000 GS 256MB (will take up to 512MB) PCIe
| + | |
| − | *$ 58.83 -> USB-UIRT
| + | |
| − | *$ 69.59 -> Gyration Motion Sensing Remote Control (GYR3101US)
| + | |
| − | | + | |
| − | This is my living-room MD.
| + | |
| − | | + | |
| − | It is connected to a Toshiba 32" CRT TV via SVideo in from the nVidia 7200 SVideo out
| + | |
| − | I have a LG Surround System here for audio (Left/Right RCA sound out from MD goes to AV-1 Input)
| + | |
| − | I have a Bell ExpressVU 2700 Dish Receiver connected to the PVR-150 via SVideo and Left/Right RCA sound jacks
| + | |
| − | The USB-UIRT is controlling the Dish, TV and Stereo. One IR dongle is stuck to the front of the LG Stereo, and it
| + | |
| − | just blasts the IR which reaches the Dish and TV.
| + | |
| − | | + | |
| − | ==Comments and Experiences==
| + | |
| − | ===Non Working core===
| + | |
| − | '''Hybrid/Core -- March 2008 -- FAILED TERRIBLY! -- RETIRED'''
| + | |
| − | | + | |
| − | ***These parts have been moved to the new hybrid/core
| + | |
| − | | + | |
| − | *$34.91 -> Diablo X-Man Silver Gamer Case, Coolmax 400W V2.01 Power Supply
| + | |
| − | *$360.06 -> EVGA nForce 650i Ultra Socket 775 Motherboard
| + | |
| − | *EVGA GeForce 8400 GS, 512MB RAM, PCIe w/DVI-TV-OUT
| + | |
| − | *Samsung 18x DVD RW SH-S183L SATA LS OEM
| + | |
| − | *Seagate 250GB Serial ATA w/NCQ 7200/8MB/SATA-3G
| + | |
| − | *Crucial 1024MB PC5400 DDR2 667 MHZ (2 pieces, for 2GB RAM)
| + | |
| − | *Intel Pentium D 925 3Ghz DT 800FSB Socket 775
| + | |
| − | ***$102.02 -> Hauppauge WINTV-PVR-150 MCE BNDL MPEG2 w/REMOTE
| + | |
| − | ***$79.99 -> WD Caviar 500GB Serial ATA HD 7200/16MB/SATA-3G
| + | |
| − | *$29.99 -> Sony DRU190A 20X DVD Burner EIDE
| + | |
| − | ***$39.99 -> Logitech Cordless Desktop LX310 (keyboard/mouse)
| + | |
| − | *$48.99 -> Gyration GO 2.4 Air Mouse, Refurbished (now on new core)
| + | |
| − | *$30.99 -> Linksys Etherfast 10/100 5-port Switch
| + | |
| − | | + | |
| − | ===Other Non Working items===
| + | |
| − | ''Items that didn't work:''
| + | |
| − | | + | |
| − | *$ 9.99 -> Trendware 32 Bit 10/100/1000 Copper Gigabit PCI Network Card.
| + | |
| − | ===Car PC===
| + | |
| − | *'''MINI ITX Media Center PC/Car PC FULLY LOADED -- March 2008 -- Ok as a MythTV 7.10 Frontend'''
| + | |
| − | *$210.00
| + | |
| − | | + | |
| − | This neat little machine was able to boot up into UI1 on 7.10RC2, and when I added the specific
| + | |
| − | video drivers for the via video (which was quite easy actually), I could play back videos (with the
| + | |
| − | occasional freeze, making it not so good) and TV playback had a green screen, picture off kilter, with
| + | |
| − | lines through it. So basically... no good.
| + | |
| − | | + | |
| − | So I loaded MythBuntu 7.10 onto the internal drive and it is now talking to the LMCE core.
| + | |
| − | | + | |
| − | I did a NFS mount to my second "media" drive in the core, and mapped the video, audio, and
| + | |
| − | pictures directories in mythtv to the LMCE core, and basically, this machine is working as it
| + | |
| − | was before under MythBuntu 8.10, with some very minor exceptions.
| + | |
| − | | + | |
| − | For $210, this is actually a pretty decent little HTPC.
| + | |
| − | | + | |
| − | ** Complete system with power adapter
| + | |
| − | * Via EPIA-SP 1GHZ with TV output
| + | |
| − | * 512MB DDR Memory
| + | |
| − | * 80GB Western Digital Scorpio HD
| + | |
| − | * LG DVD-ROM Slim
| + | |
| − | * 2 additional USB 2.0 ports (4 total)
| + | |
| − | * Dimensions: 12” x 10 ½” x 2”
| + | |
| − | | + | |
| − | ====Motherboard Specs:====
| + | |
| − | *Model Name • VIA EPIA SP13000G
| + | |
| − | *VIA EPIA SP8000EG
| + | |
| − | *Processor • VIA C3™/ VIA Eden™ EBGA processor
| + | |
| − | | + | |
| − | *Chipset • VIA CN400 North Bridge
| + | |
| − | • VIA VT8237R-Series South Bridge
| + | |
| − | | + | |
| − | *System Memory • 1 DDR266/333/400 DIMM socket
| + | |
| − | • Up to 1GB memory size
| + | |
| − | | + | |
| − | *VGA • Integrated VIA UniChrome™ Pro AGP graphics with MPEG-2 decoder /MPEG-4 Accelerator
| + | |
| − | | + | |
| − | *Expansion Slots • 1 PCI
| + | |
| − | | + | |
| − | *Onboard IDE • 2 X UltraDMA 133/100 Connector
| + | |
| − | | + | |
| − | *Onboard Serial ATA • 2 SATA Connectors
| + | |
| − | | + | |
| − | *Onboard LAN • VIA VT6103 10/100 Base-T Ethernet PHY
| + | |
| − | *Onboard Audio • VIA VT1617A 6channel AC'97 codec
| + | |
| − | *Onboard TV Out • VIA VT1623M TV Encoder
| + | |
| − | *Onboard 1394 • VIA VT6307S IEEE 1394 Firewire
| + | |
| − | *Back Panel I/O • 1 PS2 mouse port
| + | |
| − | *1 PS2 keyboard port
| + | |
| − | *1 RJ-45 LAN port
| + | |
| − | *1 Serial port
| + | |
| − | *2 USB 2.0 ports
| + | |
| − | * 1 VGA port
| + | |
| − | * 1 PCA port (SPDIF or TV out)
| + | |
| − | * 1 S-video port
| + | |
| − | * 3 Audio jacks: line-out, line-in and mic-in (Smart 5.1 Support)
| + | |
| − | *Onboard I/O Connectors • 3 USB connector for 6additional USB 2.0 ports
| + | |
| − | * 1 1394 connector for 1 1394 port
| + | |
| − | * 1 Serial port connector for a second com port
| + | |
| − | * 1 VIP connector
| + | |
| − | * 1 Front-panel audio connector (Mic-in and Line-out)
| + | |
| − | * 1 CD audio-in connector
| + | |
| − | * 1 FIR connector
| + | |
| − | * 1 CIR connector (Switchable for KB/MS)
| + | |
| − | * 1 LPT port connector
| + | |
| − | * 1 Wake-on-LAN connector
| + | |
| − | * 2 Fan connectors: CPU/Sys FAN
| + | |
| − | * 1 I2C connector
| + | |
| − | * 1 LVDS/TTL module connector (Optional)
| + | |
| − | * 1 +12V power connector
| + | |
| − | * ATX power connector
| + | |
| − | | + | |
| − | *BIOS • Award BIOS
| + | |
| − | • 4/8Mbit flash memory
| + | |
| − | | + | |
| − | *System Monitoring & Management • CPU voltage monitoring
| + | |
| − | | + | |
| − | * Wake-on-LAN, Keyboard Power-on, Timer Power-on
| + | |
| − | *System power management
| + | |
| − | *AC power failure recover
| + | |
| − | *Operating Temperature • 0~50°C
| + | |
| − | *Operating Humidity • 0% ~ 93% (relative humidity; non-condensing)
| + | |
| − | *Form Factor • Mini-ITX (6 layers)
| + | |
| − | * 17 cm x 17 cm
| + | |
| − | | + | |
| − | ==Notes==
| + | |
| − | So, that's about $2,214.00 CDN not including shipping, taxes, import fees, and mail-in rebates.
| + | |
| − | | + | |
| − | I purchase a lot of my equipment from:
| + | |
| − | | + | |
| − | -tigerdirect, See [http://www.tigerdirect.ca/indexca.asp?]
| + | |
| − | | + | |
| − | -future shop, See [http://www.futureshop.ca/home.asp?newlang=EN&logon=&langid=EN&dept=0&WLBS=fs-web1]
| + | |
| − | | + | |
| − | -ebay stores like:
| + | |
| − | | + | |
| − | X10 Warehouse, See [http://stores.ebay.ca/X10-WAREHOUSE]
| + | |
| − | | + | |
| − | LU Computers, See [http://stores.ebay.ca/LU-COMPUTERS-INC]
| + | |
| − | | + | |
| − | Mayco Estore, See [http://stores.ebay.ca/Mayco-Computer-Electronics-eStore_CAT-5e-CAT6-Network-Cables_W0QQcolZ4QQdirZ1QQfsubZ3QQftidZ2QQtZkm]
| + | |
| − | | + | |
| − | BTE Computers, See [http://stores.ebay.ca/BTEcomputer]
| + | |
| − | | + | |
| − | | + | |
| − | Once I do move the new core into place and set up the two media directors, I'll include details on each of the setups with pictures, describing the TV and A/V equipment used.
| + | |
