Difference between revisions of "Swann IP-3G ConnectCam 500"
| Line 28: | Line 28: | ||
Leave PK_FloorplanObjectType and Alert blank. | Leave PK_FloorplanObjectType and Alert blank. | ||
| − | TCP Port : 80 | + | TCP Port : 80 |
AuthUser : admin | AuthUser : admin | ||
AuthPassword : admin (assuming you have not changed it from default ) | AuthPassword : admin (assuming you have not changed it from default ) | ||
| Line 37: | Line 37: | ||
Click Save | Click Save | ||
| − | [[Image: | + | [[Image:Devicedata.JPG]] |
Now reload your DCE Router and you should see the camera in "Show Cameras" in the admin system. | Now reload your DCE Router and you should see the camera in "Show Cameras" in the admin system. | ||
Revision as of 16:09, 7 June 2009
Swann IP-3G ConnectCam 500
This is a basic IP camera with limited functionality. It is Wireless with a 802.11g functionality and is perfect for a budget indoor IP camera that is compatible with Linux MCE. Once you have plugged the camera and you know the IP address and Mac address, it is very simple to setup. Just browse to the admin system. At the bottom of the left hand pane, click "Show Devices Tree". Click CORE on the left, then click "Create child device".
Enter a common name for the camera, eg "Swann 500"
Enter the IP address and Mac address.
Then click "Pick Device Template"
You then select "Generic IP Camera" from the device templates dropdown. (This is in 810, Not sure if 710 has this template?) Once selected, click "Pick Device Template"
Another window will now appear, you can safely ignore the top half of page and scroll to the bottom.
In the "Path" field, enter the following :
/cgi/jpg/image.cgi
Leave PK_FloorplanObjectType and Alert blank.
TCP Port : 80 AuthUser : admin AuthPassword : admin (assuming you have not changed it from default ) IP : IP of Camera MAC : MAC address of camera
Click Save
Now reload your DCE Router and you should see the camera in "Show Cameras" in the admin system.
The Swann IP 3G Camera is available in the EU from :
