Difference between revisions of "ShuttleX50V2"
Bongowongo (Talk | contribs) |
Bongowongo (Talk | contribs) |
||
Line 3: | Line 3: | ||
[[Category: Nettops]] | [[Category: Nettops]] | ||
[[Category: 0810]] | [[Category: 0810]] | ||
+ | [[Category: Shuttle]] | ||
This page is compliant with 0810 Beta | Current status : '''working, not plug and play''' | This page is compliant with 0810 Beta | Current status : '''working, not plug and play''' |
Revision as of 16:25, 9 December 2010
Version | Status | Date Updated | Updated By |
---|---|---|---|
710 | Unknown | N/A | N/A |
810 | Works, not pnp | 8th September 2010 | BongoWongo |
1004 | Unknown | N/A | N/A |
1204 | Unknown | N/A | N/A |
1404 | Unknown | N/A | N/A |
Usage Information |
This page is compliant with 0810 Beta | Current status : working, not plug and play
Shuttle X50 V2 [1]
It is a 15,4 inch touchscreen with an atom processor, with builtin camera, microphone and speakers. Ideal for a kitchen situation.
Pro's
- Nice esthetics
- All in one
Cons
- Intel GMA is not the best card for LinuxMCE
- Needs configuring
How to get it working.
Diskless Boot
- Unrecognized NIC
The driver for the JMicron JMC250 PCI Express Gigabit Ethernet controller needs to be first installed, before the MD will netboot. Download the file jme-1.0.5.tbz2 which contains the driver from ftp://driver.jmicron.com.tw/Ethernet/Linux/
Open a "terminal" and type the following
$ tar xjvf jme-1.0.5.tbz2 $ cd jme-1.0.5 $ make install
copy the module to the running kernel
$ cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/
To get a NIC to work, you have to modify a file, type the following in "terminal"
$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules
and add a single line for your NICs kernel module. In the above case the name of the module is
jme
After adding the above line (and saving the change of course), you have to recreate the initial ramdisk.
/usr/pluto/bin/Diskless_BuildDefaultImage.sh
or maybe
mkinitramfs -d /etc/initramfs-tools-interactor/ -o /tftpboot/default/initrd
is enough.
This will create a new initial ramdisk for the first boot of new MDs containing the jme module. Now, the first boot of the diskless MD will succeed and a new diskless media director will be created.
- ACPI
Turn it off
Needs more info
Touchscreen
Used a keyboard to go through all of the wizards, went into KDE Desktop, installed latest Egalax drivers. Touchscreen works, but has the tendency to double tap. Ignore first event, does not work.
Needs more info
Other remarks, needed investigation
- Could not get a higher resolution than 640x480, need to configure videocard proper. Driver/Xorg.conf possible solution => install intel ppa drivers
sudo apt-get remove -purge nvidia* http://forum.linuxmce.org/index.php?topic=9149.0
- Makes strange dark beep when booting
- As I do not use it and I was in troubleshooting modus, I disconnected the wifi, so cannot comment on it
- Webcam and microphone are not tested yet
This page is a work in progress