HarmanKardon AVR245: Difference between revisions

Latest revision as of 21:13, 9 November 2011

Version	Status	Date Updated	Updated By
710	Unknown	N/A	N/A
810	Unknown	N/A	N/A
1004	Unknown	N/A	N/A
1204	Unknown	N/A	N/A
1404	Unknown	N/A	N/A
Usage Information

This article is a stub and requires expansion

2 x HDMI-in to HDMI-out (selectable)
OSD setup
hard power-switch (in/out toggle) next to soft power switch (push button)
RS232 port on rear is only for firmware upgrades, according to manual, however there is an external IR input jack, so external control via PC will just require a little more "glue"
dim/night mode for display, which dims the VFD, and shuts off the inner blue glow of the volume control
There is an A/V Delay setting, which can be used to add latency to the audio in order to sync with other audio output devices. I noticed that my LG 42LB5D has a bit of audio latency on its speakers, and until I figure out how to eliminate it, I have set my AVR245 to 80ms of delay, which syncs it up nicely with the TV.

@@ Line 1: / Line 1: @@
-See: [[Suggested hardware]]
+[[Category: Hardware]]
+[[Category: Audio]]
+[[Category:Amps_Receivers]]
+{{versioninfo}}
+{{stub}}
-[[Category: Audio]]
+* 2 x HDMI-in to HDMI-out (selectable)
+* OSD setup
+* hard power-switch (in/out toggle) next to soft power switch (push button)
+* RS232 port on rear is only for firmware upgrades, according to manual, however there is an external IR input jack, so external control via PC will just require a little more "glue"
+* dim/night mode for display, which dims the VFD, and shuts off the inner blue glow of the volume control
+* There is an ''A/V Delay'' setting, which can be used to add latency to the audio in order to sync with other audio output devices.  I noticed that my LG 42LB5D has a bit of audio latency on its speakers, and until I figure out how to eliminate it, I have set my AVR245 to 80ms of delay, which syncs it up nicely with the TV.