Jump to content

Networks: Difference between revisions

From LinuxMCE
Twodogs (talk | contribs)
287 edits
Created page with "The core needs two local area network (LAN) ports to support the external and internal networks. The way this is generally done is use the motherboard's onboard LAN and to instal..."
 
mNo edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The core needs two local area network (LAN) ports to support the external and internal networks. The way this is generally done is use the motherboard's onboard LAN and to install a network interface card (NIC) for the second port. The transmission speed on the external network will be limited by your provider, but the internal network is only limited by your hardware. Gigabit hardware is not required, but might be nice for the internal LAN. Most LinuxMCE networks are a combination of wired and wireless. The major data-intensive components in your system (core, media directors, NAS) should be wired with cat5e or cat6. Orbiters are generally wireless because they move very little data and are designed to be portable remote controls.
==Links==
It is up to the user where to store data. For instance, a ripped movie collection could be stored on the core, on a media director, or on a NAS. The LinuxMCE software will find the collection and make it available to the entire system.


Network Attached Storage
*[[Network Setup]]
http://wiki.linuxmce.org/index.php/Category:Network_Attached_Storage
*[[:Category:Network_Attached_Storage|Network Attached Storage (NAS)]]
*[[:Category:Network_Adapters|Network Interface Cards (NICs) and Chipsets]]
*[[:Category:Routers|Routers and Switches]]
*[[:Category:Network_Tutorials|General Network Tutorials]]


Network Interface Cards (NICs) and Chipsets
==About==
http://wiki.linuxmce.org/index.php/Category:Network_Adapters


Routers and Switches
The core needs two local area network (LAN) ports to support the external and internal networks. This usually entails installing a network interface card (NIC) in addition to the motherboard's onboard port. The transmission speed on the external network will be limited by your provider, but the internal network is only limited by your hardware. Gigabit hardware is not required, but might be nice for the internal LAN. Most LinuxMCE networks are a combination of wired and wireless. The major data-intensive components in your system (core, media directors, NAS) should be wired with cat5e or cat6. Orbiters are generally wireless because they move very little data and are designed to be portable remote controls.
http://wiki.linuxmce.org/index.php/Category:Routers


Network Tutorials
It is up to the user where to store data. For instance, a ripped movie collection could be stored on the core, on a media director, or on a NAS. The LinuxMCE software will find the collection and make it available to the entire system.
add Category: Network Tutorials

Latest revision as of 14:37, 27 November 2011

About

The core needs two local area network (LAN) ports to support the external and internal networks. This usually entails installing a network interface card (NIC) in addition to the motherboard's onboard port. The transmission speed on the external network will be limited by your provider, but the internal network is only limited by your hardware. Gigabit hardware is not required, but might be nice for the internal LAN. Most LinuxMCE networks are a combination of wired and wireless. The major data-intensive components in your system (core, media directors, NAS) should be wired with cat5e or cat6. Orbiters are generally wireless because they move very little data and are designed to be portable remote controls.

It is up to the user where to store data. For instance, a ripped movie collection could be stored on the core, on a media director, or on a NAS. The LinuxMCE software will find the collection and make it available to the entire system.

Retrieved from "http://wiki.linuxmce.org/index.php?title=Networks&oldid=29218"