Difference between revisions of "User:Polly"

From LinuxMCE
Jump to: navigation, search
m
(→‎Broadcom BCM57765 ethernet tg3-driver install)
 
(44 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
Hardware
+
== Hardware ==
  
−
MacMini 2010 - Model 4,1
 
−
Intel Core 2 Duo - 2.66GHz
 
−
8GB RAM
 
−
S/PDIF audio
 
−
Teufel Concept E 300 "5.1-Set"
 
−
DVB-S Device: TT-Connect S2 3650CI
 
−
Remote: WII Mote Plus
 
−
External HDD (2x 2TB): ICY BOX
 
−
iPad2
 
−
iPhone 3GS
 
−
Cups Printer: Canon IP5300
 
−
Let's go
 
  
−
Drop in DVD and boot from cdrom
+
* MacMini 2010 - Model 4,1
−
in grub select „Install
+
** Intel Core 2 Duo - 2.66GHz
−
TAB to set boot options and add nomodeset
+
** 8GB RAM
−
hit ENTER to run installer
+
** S/PDIF audio
−
Wait till it completely bootet…
+
* Teufel Concept E 300 "5.1-Set"
−
Follow the nice looking installer (If you can't figure out how to do this, go home!  )
+
* DVB-S Device: TT-Connect S2 3650CI
−
Update grub to enable reboot and graphics
+
* Remote: WII Mote Plus
 +
* External HDD (2x 2TB): ICY BOX
 +
* iPad2
 +
* iPhone 3GS
 +
* Cups Printer: Canon IP5300
 +
 
 +
 
 +
I used Snapshot '''LMCE-1004-20120701130826149.iso'''
 +
 
 +
== Let's go ==
 +
 
 +
* Drop in DVD and boot from cdrom
 +
* in grub select "Install"
 +
* TAB to set boot options and add '''nomodeset'''
 +
* hit ENTER to run installer
 +
* Wait till it completely bootet…
 +
* Follow the nice looking installer (If you can't figure out how to do this, go home! ;-) )
 +
 
 +
== Update grub to enable reboot and graphics ==
 +
 
  
 
After install boot again from DVD
 
After install boot again from DVD
  
−
Drop in DVD and boot from cdrom
+
* Drop in DVD and boot from cdrom
−
in grub select „Install
+
* in grub select "Install"
−
TAB to set boot options and add nomodeset
+
* TAB to set boot options and add nomodeset
−
HDD needs to be mounted and we need to change some mount points temporarily. Do following steps:
+
* HDD needs to be mounted and we need to change some mount points temporarily. Do following steps:
 +
 
 +
  mount HDD Kubuntu is installed on
 +
  mount --bind /dev/ /media/YOUR-DISK/dev/
 +
  mount --bind /proc/ /media/YOUR-DISK/proc/
 +
  mount --bind /sys/ /media/YOUR-DISK/sys/
 +
  chroot /media/YOUR-DISK/
  
−
mount HDD Kubuntu is installed on
 
−
mount --bind /dev/ /media/YOUR-DISK/dev/
 
−
mount --bind /proc/ /media/YOUR-DISK/proc/
 
−
mount --bind /sys/ /media/YOUR-DISK/sys/
 
−
chroot /media/YOUR-DISK/
 
 
edit
 
edit
  
−
nano -w /etc/default/grub
+
  nano -w /etc/default/grub
 +
 
 
and verify that GRUB_CMDLINE_LINUX_DEFAULT contains nomodeset and reboot=pci Possibly its the best to add these values at the end
 
and verify that GRUB_CMDLINE_LINUX_DEFAULT contains nomodeset and reboot=pci Possibly its the best to add these values at the end
  
 
e.g.
 
e.g.
  
−
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset reboot=pci"
+
  GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset reboot=pci"
 +
 
 
Whats going on ..
 
Whats going on ..
  
−
nomodeset fixes black screen after boot
+
* nomodeset fixes black screen after boot
−
reboot=pci enables reboot, if not set it won't reboot
+
* reboot=pci enables reboot, if not set it won't reboot
 +
 
 
To apply the new settings to grub run
 
To apply the new settings to grub run
  
−
update-grub
+
  update-grub
−
reboot
+
  reboot
 +
 
 
Now you should be able to boot without getting a black screen and you are also able to reboot, but hold on for a few more minutes
 
Now you should be able to boot without getting a black screen and you are also able to reboot, but hold on for a few more minutes
  
−
auto install NVIDIA 320M
+
== auto install NVIDIA 320M ==
 +
 
 +
'''Does work now! THX L3top'''
  
−
Should work in the new Snapshot
 
 
Basic Steps to make it work automatically:
 
Basic Steps to make it work automatically:
  
 
Check NVIDIA Card
 
Check NVIDIA Card
  
−
sudo apt-cache policy nvidia-glx-260 | grep -i Installed
+
  sudo apt-cache policy nvidia-glx-260 | grep -i Installed
−
sudo lspci -nn | grep VGA
+
  sudo lspci -nn | grep VGA
−
Update pciid
+
  Update pciid
 +
 
 +
  sudo update-pciids
 +
  lspci -nn | grep VGA
  
−
sudo update-pciids
 
−
lspci -nn | grep VGA
 
 
Get pciid
 
Get pciid
  
−
lspci -nn | grep -vi "non-vga" | grep "VGA" | sed 's/.*://;s/\].*//'  
+
  lspci -nn | grep -vi "non-vga" | grep "VGA" | sed 's/.*://;s/\].*//'  
 +
 
 
add pciid in nvidia-install.sh. Add it to both lines DRIVER_260_SUPPORTED and VDPAU_REV_C_SUPPORTED
 
add pciid in nvidia-install.sh. Add it to both lines DRIVER_260_SUPPORTED and VDPAU_REV_C_SUPPORTED
  
−
sudo nano -w /usr/pluto/bin/nvidia-install.sh
+
  sudo nano -w /usr/pluto/bin/nvidia-install.sh
−
sudo /root/NVIDIA-Linux-x86-290.10.run --uninstall
+
  sudo /root/NVIDIA-Linux-x86-290.10.run --uninstall
−
sudo reboot
+
  sudo reboot
−
Broadcom BCM57765 ethernet tg3-driver install
+
 
 +
== Broadcom BCM57765 ethernet tg3-driver install ==
  
 
Download Driver
 
Download Driver
Line 81: Line 97:
 
Go to dir and install
 
Go to dir and install
  
−
cd tg3-3.116j/
+
  cd tg3-3.116j/
−
make
+
  make
−
make install
+
  make install
−
Edit /etc/network/interfaces, replace address and gateway with yours
+
  
−
iface eth0 inet static
+
== Public Key Error medibuntu ==
−
      address 192.168.0.xx
+
−
      netmask 255.255.255.0
+
−
      gateway 192.168.0.xx
+
−
      pre-up sysctl -q -e -w  net.ipv6.conf.eth0.disable_ipv6=1
+
−
Restart Network
+
−
 
+
−
/etc/init.d/networking restart
+
−
 
+
−
or (last one is recommended by Shell)
+
−
 
+
−
service networking top
+
−
service networking start
+
−
 
+
−
reboot
+
−
NOTE: Make sure you disabled DHCP in lmce-admin web interface if you are running LMCE behind a router which is already using DHCP
+
−
 
+
−
Public Key Error medibuntu
+
  
 
By making sure that the LinuxMCE is up to date i had trouble doing „apt-get update“.
 
By making sure that the LinuxMCE is up to date i had trouble doing „apt-get update“.
Line 109: Line 107:
 
Error
 
Error
  
−
W: GPG error: http://packages.medibuntu.org lucid
+
  W: GPG error: http://packages.medibuntu.org lucid
  
 
Fix
 
Fix
  
−
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 2EBC26B60C5A2783
+
  sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 2EBC26B60C5A2783
−
Install TT-connect 3650 S2 DVB receiver
+
 
 +
 
 +
== Install TT-connect 3650 S2 DVB receiver ==
  
 
Kernel update may harm your dvb driver!!!!
 
Kernel update may harm your dvb driver!!!!
  
 
If this happend make sure you cleaned your dvb drivers:  
 
If this happend make sure you cleaned your dvb drivers:  
−
sudo rm -rf /lib/modules/2.6.32-41-generic/kernel/drivers/media/dvb/dvb-usb/*
 
  
−
S2API
+
  sudo rm -rf /lib/modules/2.6.32-41-generic/kernel/drivers/media/dvb/dvb-usb/*
  
−
mkdir 3650
+
=== S2API ===
−
cd 3650
+
−
hg clone http://mercurial.intuxication.org/hg/s2-liplianin
+
−
cd s2-liplianin
+
−
make
+
−
make install
+
−
ISSUE
+
  
−
/home/jochen/3650/s2-liplianin/v4l/firedtv-1394.c:298: error: implicit declaration of function 'hpsb_unregister_protocol'
+
  mkdir 3650
−
make[3]: *** [/home/jochen/3650/s2-liplianin/v4l/firedtv-1394.o] Error 1
+
  cd 3650
−
make[2]: *** [_module_/home/jochen/3650/s2-liplianin/v4l] Error 2
+
  hg clone http://mercurial.intuxication.org/hg/s2-liplianin
−
make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-33-generic'
+
  cd s2-liplianin
−
make[1]: *** [default] Fehler 2
+
  make
−
make[1]: Verlasse Verzeichnis '/home/jochen/3650/s2-liplianin/v4l'
+
  make install
−
make: *** [all] Fehler 2
+
−
FIX
+
  
−
change CONFIG_DVB_FIREDTV=m to CONFIG_DVB_FIREDTV=y
+
==== ISSUE ====
  
−
in
+
  /root/3650/s2-liplianin/v4l/firedtv-1394.c:298: error: implicit declaration of function 'hpsb_unregister_protocol'
 +
  make[3]: *** [/home/jochen/3650/s2-liplianin/v4l/firedtv-1394.o] Error 1
 +
  make[2]: *** [_module_/home/jochen/3650/s2-liplianin/v4l] Error 2
 +
  make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-33-generic'
 +
  make[1]: *** [default] Fehler 2
 +
  make[1]: Verlasse Verzeichnis '/root/3650/s2-liplianin/v4l'
 +
  make: *** [all] Fehler 2
  
−
./3650/s2-liplianin/v4l/.config
+
'''FIX'''
−
Kernel versions earlier than „2.6.32-41-generic“ i used to install the dvb device like described here
+
−
Download and copy ngene to /lib/firmware (no idea if it is really needed)
+
  
−
wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_15.fw
+
  change CONFIG_DVB_FIREDTV=m to CONFIG_DVB_FIREDTV=y
−
cp ngene_15.fw /lib/firmware/
+
−
wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw
+
−
sudo cp ngene_18.fw /lib/firmware
+
−
Related Links
+
  
−
http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual#Firmware
+
in
−
http://www.linuxtv.org/wiki/index.php/Linux4Media_cineS2_DVB-S2_Twin_Tuner#Firmware
+
−
Create or edit /etc/modprobe.d/dvb.conf and add following lines
+
  
−
Set options for splitting twin tuners. If i got it right, there is some trouble with twin tuners detecting each tuner as a single device.
+
  ./3650/s2-liplianin/v4l/.config
  
−
options ngene one_adapter=1
+
Kernel versions earlier than „2.6.32-41-generic“ i used to install the dvb device like described here
−
options ngene one_adapter=0
+
−
When these option are not set maybe an error occur in mythtv setting up the TV card
+
  
−
reboot
+
=== Download and copy ngene to /lib/firmware (no idea if it is really needed) ===
−
MythTV
+
  
−
By following the advice at LMCE-Forum i manually installed mythtv
+
  wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_15.fw
 +
  cp ngene_15.fw /lib/firmware/
 +
  wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw
 +
  sudo cp ngene_18.fw /lib/firmware
  
−
sudo apt-get install mythtv
+
'''Related Links'''
−
In my case pluto-mythtv-plugin was not found. So i decided to run myth-setup via a X session.
+
  
−
Remote login using ssh (on Mac you can use the Terminal-App)
+
http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual#Firmware
  
−
ssh user@192.168.80.1 -X
+
http://www.linuxtv.org/wiki/index.php/Linux4Media_cineS2_DVB-S2_Twin_Tuner#Firmware
−
Start mythtv-setup
+
  
−
sudo mythtv-setup
+
Set options for splitting twin tuners. If i got it right, there is some trouble with twin tuners detecting each tuner as a single device.
−
I used these instructions to setup my usb tv tuner.
+
  
−
Astra 19.2E scan settings
+
  options ngene one_adapter=1
 +
  options ngene one_adapter=0
  
−
freq: 12551500
+
When these option are not set maybe an error occur in mythtv setting up the TV card
  
−
pol: horizontal/vertical (scan for both)
+
  reboot
  
−
symbol rate: 22000000
+
== VDR ==
  
−
fec: auto
+
just worked ...
  
−
Restart "mythbackend" after each reboot
+
== iPad, iPhone 3GS Orbiter ==
−
 
+
−
Descripton
+
−
 
+
−
Running mythtv frontend after reboot gave me random errors e.g. „already using all available inputs“
+
−
 
+
−
Solution
+
−
 
+
−
Edit rc.local
+
−
 
+
−
sudo nano -w /etc/rc.local
+
−
add „killall mythbackend“ right before „exit 0“
+
−
 
+
−
...
+
−
 
+
−
killall mythbackend
+
−
mythtvbackend
+
−
 
+
−
 
+
−
exit 0
+
−
Related Links
+
−
 
+
−
http://www.mythtvtalk.com/solution-having-restart-mythbackend-reboot-11530/
+
−
 
+
−
https://bugs.launchpad.net/mythbuntu/+bug/182746
+
−
 
+
−
mythweb
+
−
 
+
−
mythweb white page
+
−
 
+
−
If you get a white page on mythweb, a possible reason is wrong settings for mysql connection.
+
−
 
+
−
Make sure you set the right mysql values in /etc/apache2/sites-enabled/mythweb.conf
+
−
 
+
−
setenv db_server        "localhost"
+
−
setenv db_name          "mythconverg"
+
−
setenv db_login        "mythtv"
+
−
setenv db_password      "PASSWORD"
+
−
Can't save settings
+
−
 
+
−
Maybe you can't save channel settings. This happens because of apache and suhosin settings. Check your apache log
+
−
 
+
−
tail -f /var/log/apache2/error.log
+
−
If you get an error like this:
+
−
 
+
−
.. PHP Warning:  Unknown: Input variables exceeded 5000. To increase the limit change max_input_vars in php.ini. in Unknown on line 0, referer: http://dcerouter/mythweb/settings/tv/channels
+
−
Increase the values in /etc/php5/apache2/php.ini as follows
+
−
 
+
−
max_input_vars = 15000;
+
−
[suhosin]
+
−
suhosin.post.max_vars = 15000
+
−
suhosin.request.max_vars = 15000
+
−
The value to set depends on the number of channels listed
+
−
 
+
−
iPad, iPhone 3GS Orbiter
+
  
 
http://wiki.linuxmce.org/index.php/Web_Orbiter_2.0
 
http://wiki.linuxmce.org/index.php/Web_Orbiter_2.0
  
−
CUPS and Airprint
+
== CUPS and Airprint ==
−
 
+
−
Someone wrote a nice python script to generate a *.service file for avahi
+
−
 
+
−
Install required packages
+
−
 
+
−
sudo apt-get install git-core python python-cups
+
−
Download script using git
+
−
 
+
−
git clone https://github.com/tjfontaine/airprint-generate.git
+
−
go to the downloaded folder, Execute command to generate *.service file of existing printers
+
−
 
+
−
cd airport-generate/
+
−
python airprint-generate.py
+
−
Copy *.service files to /etc/avahi/services/
+
  
−
cp *.service /etc/avahi/services/
+
CUPS worked out of the box on the latest 12.04 install
−
Edit /etc/cups/cupsd.conf
+
  
−
sudo nano -w /etc/cups/cupsd.conf
+
== Network Boot from MacMini 2006 ==
−
Add this line
+
  
−
# CUPS AIRPRINT
+
Howto utilize your USB to PXE boot a Mac:
−
ServerAlias *
+
[[Mac_MediaDirector]]
−
edit /etc/cups/printers.confa and comment out „AllowUser“ line. This allows every computer in the network to print! It was required for Airprint to work because of permission problems
+
  
−
#AllowUser USER
+
== Things to come... ==
−
restart cups
+
  
−
sudo service cups restart
+
* AirPlay does not work. Bugreport
 +
* Control my Samsung Plasma TV. 2 ways possible. Either use HDMI or Network...
 +
* Find a way to change the volume. Currently using S/PDIF, i guess no chance to change volume within LinuxMCE

Latest revision as of 17:41, 23 November 2013

Hardware

  • MacMini 2010 - Model 4,1
    • Intel Core 2 Duo - 2.66GHz
    • 8GB RAM
    • S/PDIF audio
  • Teufel Concept E 300 "5.1-Set"
  • DVB-S Device: TT-Connect S2 3650CI
  • Remote: WII Mote Plus
  • External HDD (2x 2TB): ICY BOX
  • iPad2
  • iPhone 3GS
  • Cups Printer: Canon IP5300


I used Snapshot LMCE-1004-20120701130826149.iso

Let's go

  • Drop in DVD and boot from cdrom
  • in grub select "Install"
  • TAB to set boot options and add nomodeset
  • hit ENTER to run installer
  • Wait till it completely bootet…
  • Follow the nice looking installer (If you can't figure out how to do this, go home! ;-) )

Update grub to enable reboot and graphics

After install boot again from DVD

  • Drop in DVD and boot from cdrom
  • in grub select "Install"
  • TAB to set boot options and add nomodeset
  • HDD needs to be mounted and we need to change some mount points temporarily. Do following steps:
 mount HDD Kubuntu is installed on
 mount --bind /dev/ /media/YOUR-DISK/dev/
 mount --bind /proc/ /media/YOUR-DISK/proc/
 mount --bind /sys/ /media/YOUR-DISK/sys/
 chroot /media/YOUR-DISK/

edit 

 nano -w /etc/default/grub

and verify that GRUB_CMDLINE_LINUX_DEFAULT contains nomodeset and reboot=pci Possibly its the best to add these values at the end

e.g. 

 GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset reboot=pci"

Whats going on ..

  • nomodeset fixes black screen after boot
  • reboot=pci enables reboot, if not set it won't reboot

To apply the new settings to grub run 

 update-grub
 reboot

Now you should be able to boot without getting a black screen and you are also able to reboot, but hold on for a few more minutes

auto install NVIDIA 320M

Does work now! THX L3top

Basic Steps to make it work automatically:

Check NVIDIA Card 

 sudo apt-cache policy nvidia-glx-260 | grep -i Installed
 sudo lspci -nn | grep VGA
 Update pciid

 sudo update-pciids
 lspci -nn | grep VGA

Get pciid 

 lspci -nn | grep -vi "non-vga" | grep "VGA" | sed 's/.*://;s/\].*//'

add pciid in nvidia-install.sh. Add it to both lines DRIVER_260_SUPPORTED and VDPAU_REV_C_SUPPORTED 

 sudo nano -w /usr/pluto/bin/nvidia-install.sh
 sudo /root/NVIDIA-Linux-x86-290.10.run --uninstall
 sudo reboot

Broadcom BCM57765 ethernet tg3-driver install

Download Driver

http://www.broadcom.com/support/license.php?file=570x/linux-3.122g.zip

Go to dir and install 

 cd tg3-3.116j/
 make
 make install

Public Key Error medibuntu

By making sure that the LinuxMCE is up to date i had trouble doing „apt-get update“.

Error 

 W: GPG error: http://packages.medibuntu.org lucid

Fix 

 sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 2EBC26B60C5A2783


Install TT-connect 3650 S2 DVB receiver

Kernel update may harm your dvb driver!!!!

If this happend make sure you cleaned your dvb drivers: 

 sudo rm -rf /lib/modules/2.6.32-41-generic/kernel/drivers/media/dvb/dvb-usb/*

S2API

 mkdir 3650
 cd 3650
 hg clone http://mercurial.intuxication.org/hg/s2-liplianin
 cd s2-liplianin
 make
 make install

ISSUE

 /root/3650/s2-liplianin/v4l/firedtv-1394.c:298: error: implicit declaration of function 'hpsb_unregister_protocol'
 make[3]: *** [/home/jochen/3650/s2-liplianin/v4l/firedtv-1394.o] Error 1
 make[2]: *** [_module_/home/jochen/3650/s2-liplianin/v4l] Error 2
 make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-33-generic'
 make[1]: *** [default] Fehler 2
 make[1]: Verlasse Verzeichnis '/root/3650/s2-liplianin/v4l'
 make: *** [all] Fehler 2

FIX 

 change CONFIG_DVB_FIREDTV=m to CONFIG_DVB_FIREDTV=y

in 

 ./3650/s2-liplianin/v4l/.config

Kernel versions earlier than „2.6.32-41-generic“ i used to install the dvb device like described here

Download and copy ngene to /lib/firmware (no idea if it is really needed)

 wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_15.fw
 cp ngene_15.fw /lib/firmware/
 wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw
 sudo cp ngene_18.fw /lib/firmware

Related Links

http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual#Firmware

http://www.linuxtv.org/wiki/index.php/Linux4Media_cineS2_DVB-S2_Twin_Tuner#Firmware

Set options for splitting twin tuners. If i got it right, there is some trouble with twin tuners detecting each tuner as a single device. 

 options ngene one_adapter=1
 options ngene one_adapter=0

When these option are not set maybe an error occur in mythtv setting up the TV card 

 reboot

VDR

just worked ...

iPad, iPhone 3GS Orbiter

http://wiki.linuxmce.org/index.php/Web_Orbiter_2.0

CUPS and Airprint

CUPS worked out of the box on the latest 12.04 install

Network Boot from MacMini 2006

Howto utilize your USB to PXE boot a Mac: Mac_MediaDirector

Things to come...

  • AirPlay does not work. Bugreport
  • Control my Samsung Plasma TV. 2 ways possible. Either use HDMI or Network...
  • Find a way to change the volume. Currently using S/PDIF, i guess no chance to change volume within LinuxMCE
Retrieved from "http://wiki.linuxmce.org/index.php?title=User:Polly&oldid=34631"