Difference between revisions of "DViCO Fusion Dual Digital 2"
From LinuxMCE
m |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category: Hardware]] | ||
| + | {{versioninfo|710Status=Working|710UpdatedDate=2st May 2010|710UpdatedBy=Adriel|810Status=Working|810UpdatedDate=2st May 2010|810UpdatedBy=Adriel}} | ||
[[Category: Video]] | [[Category: Video]] | ||
[[Category: TV Cards]] | [[Category: TV Cards]] | ||
Latest revision as of 16:41, 29 September 2010
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Working | 2st May 2010 | Adriel |
| 810 | Working | 2st May 2010 | Adriel |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
The (PCI) DViCO Dual digital 2 works for me with very little work.... following these instructions: [1]
See also Ubuntu howto Ubuntu forum thread
Rev 2 version of the card is also working.
Rev 2 of the card may have troubles with the USB driver in the LMCE 710 kernel, and some motherboards ("USB disconnects" with AMD motherboard chipsets). Note that the DViCO card has 2 USB tuners and a USB interface chipset on it, so it requires the kernel to properly support the USB interface chip. If you experience tuner device drivers "vanishing" and/or blank recordings of zero length, then you may have to upgrade your kernel to get it to work reliably. Blank recordings may also be due to a bad antenna or loose antenna cable.
