Difference between revisions of "Control LinuxMCE with Gyro Remote"

From LinuxMCE
Jump to: navigation, search
 
 
(11 intermediate revisions by 6 users not shown)
Line 1: Line 1:
−
<table width="100%"> <tr><td bgcolor="#FFCFCF">This page was written by Pluto and imported with their permission when LinuxMCE branched off in February, 2007.  In general any information should apply to LinuxMCE.  However, this page should be edited to reflect changes to LinuxMCE and remove old references to Pluto.</td></tr> </table>Pluto's original, 'normal' UI works on nearly all graphics platforms.  The menus are full screen.  When you start media your media becomes full screen.  If you need to do something with your media, like change chapters, the media shrinks to a corner of the screen so the rest of the screen shows your media options.  And if you need to return to the main menu to do something else, like adjust the lights, your media is hidden while the main menu appears full screen.
+
[[Category:Remote Controls]]
  
−
Pluto has a new 'alpha blended' UI, aka UI2.  In this case your media is always first and foremost, and the media is always full-screen.  If you're not watching any media, Pluto downloads the 'most interesting' photos from flickr.com and presents smooth sliding, cross-fading gallery art as your media.  With UI2 your media never shrinks and never disappears.  Rather, if you want to bring up the main menu or make some adjustments to your media, Pluto's GUI fades into and out of your media, known as alpha blending.  The new UI also includes a 3d media browser showing all the media in your house on the sides of a 3d cube which you can rotate to find what you're interested in.
+
When the system starts with UI2 you will see the gallery art first.
  
−
Unfortunately very few video card manufacturers have the necessary composite extensions in their Linux drivers.  At this moment the only video hardware we have confirmed UI2 works with are the nVidia 6xxx and 7xxx series; preferably a 7xxx with at least 128MB RAM.
+
You can navigate UI2 using either a keyboard/mouse, a Windows XP MC remote (with a Tira, IRTrans, USB-UIRT or other compatible infrared receiver), or (for best results) a special gyro-based remote.  
  
−
You can navigate UI2 using either a keyboard/mouse, or a Windows XP MC remote and a Tira, IRTrans, USB-UIRT or other compatible infrared receiver, or for best results, a Gyration GC-1005 go mouse, which is like an 'air mouse' that you control by waving through the air.  When the system starts with UI2 you will see the gallery art first thing.  Press the 'start' button on the MC remote, or the F7 on the keyboard, or the middle 'soft' button on the go mouse to bring up the main menu.  Use the arrows or the mouse to highlight the option you want, and click the 'ok' or 'left mouse' button to select.  When there are lists of content, such as when you chose 'Media', 'Audio', you can make the list rotate in 3D as the side of a cube by arrowing past the top and bottom, or move your mouse or go-mouse past the top and bottom of the list.
+
Press the 'start' button on the MC remote, the F7 on the keyboard, or the middle 'menu' button on the gyro remote to bring up the main menu.  Use the arrows (or the mouse) to highlight the option you want (or move the gyro remote in the air). Click the 'OK' or 'left mouse' button to select.   
  
−
When media is playing, you can use the normal keys on the i/r remote to control the media playback and volume.  Or press F6 or the left soft key on the go mouse, and then move left and right to adjust playback speed, or move up and down to skip through chapters/tracks/channels/songs depending on the type of media.  With the left and right movement you have both absolute and relative.  Absolute means keep the button held down while you move left and right.  This is quite useful with the go-mouse.  Press the left button, and if you move your hand all the way to the left you are at the beginning of your media, all the way to the right and you are at the end.  Or, tap and release the button, then when you move left and right you are in relative, or jog shuttle mode.  Move slowly to the right for slow motion forward, further to the right for 400x forward, back to the to rewind, and so on.
+
When there are lists of content, such as when you chose 'Media', 'Audio', you can make the list rotate in 3D by arrowing past the top and bottom of the cube (or move your mouse or gyro remote past the top and bottom of the list).
  
−
Press F8, or the right go-mouse soft button, to control the 'ambiance', that is lights and volume.  Move up and down to adjust the light level, left and right to adjust the volume level.  Like with media playback, holding the button down while you move is 'absolute' mode--ie all the way left is volume mute, right is full blast--or tap and release for relative mode--the further you move to the left the faster the volume lowers.
+
When media is playing, you can use the normal keys on the I/T remote to control the media playback and volume.  Or press F6 or the 'media' button on the gyro remote, and then move left and right to adjust playback speed, or move up and down to skip through chapters/tracks/channels/songs depending on the type of media.
  
−
With the go-mouse or regular mouse, the right button is the 'cancel/off'.  If you have a menu on screen it makes the menu disappear.  Tap when there's menu on screen and whatever media you were playing stops.  Press and hold to turn off the tv or power down the system.
+
With the left and right movement you have both "absolute" and "relative" movement possible.
 +
 
 +
"Absolute" means holding the button down while you move left and right (this is quite useful with the gyro remote).  Press the left button, and if you move your hand all the way to the left you come to the beginning of your media. Move all the way to the right and you are at the end.
 +
 
 +
Tap and release the button -- when you then move left and right you are in "relative" (or "jog shuttle") mode.  Move slowly to the right for slow motion forward. Move further to the right for 400x forward. Move back to the left to rewind, and so on.
 +
 
 +
While you are watching LiveTV or a DVD you can use the absolute function of the left gyro button and move up and down to scroll through a tumbling menu of either channels (or chapters, depending on the Media being displayed). 
 +
 
 +
Press F8, or the 'ambiance' button on the gyro remote, to control the 'ambiance' (the lights and volume).  Move up and down to adjust the light level, left and right to adjust the volume level.  Like with media playback, holding the button down while you move is 'absolute' mode -- all the way left is volume mute, right is full blast. Tap and release for relative mode -- the further you move to the left the faster the volume lowers.
 +
 
 +
With a mouse, the right button is the ''cancel/off''; with the gyro remote it is marked 'X'.  If you have a menu on the screen it makes the menu disappear.  When there's no menu on screen, tap to stop whatever media you're playing.  Press and hold to turn off the TV or to power down the system.
 +
 
 +
Thus with UI2 you can control the entire system using only the 3 buttons on the gyro remote (plus the ok and cancel buttons).

Latest revision as of 22:21, 19 October 2012


When the system starts with UI2 you will see the gallery art first.

You can navigate UI2 using either a keyboard/mouse, a Windows XP MC remote (with a Tira, IRTrans, USB-UIRT or other compatible infrared receiver), or (for best results) a special gyro-based remote.

Press the 'start' button on the MC remote, the F7 on the keyboard, or the middle 'menu' button on the gyro remote to bring up the main menu. Use the arrows (or the mouse) to highlight the option you want (or move the gyro remote in the air). Click the 'OK' or 'left mouse' button to select.

When there are lists of content, such as when you chose 'Media', 'Audio', you can make the list rotate in 3D by arrowing past the top and bottom of the cube (or move your mouse or gyro remote past the top and bottom of the list).

When media is playing, you can use the normal keys on the I/T remote to control the media playback and volume. Or press F6 or the 'media' button on the gyro remote, and then move left and right to adjust playback speed, or move up and down to skip through chapters/tracks/channels/songs depending on the type of media.

With the left and right movement you have both "absolute" and "relative" movement possible.

"Absolute" means holding the button down while you move left and right (this is quite useful with the gyro remote). Press the left button, and if you move your hand all the way to the left you come to the beginning of your media. Move all the way to the right and you are at the end.

Tap and release the button -- when you then move left and right you are in "relative" (or "jog shuttle") mode. Move slowly to the right for slow motion forward. Move further to the right for 400x forward. Move back to the left to rewind, and so on.

While you are watching LiveTV or a DVD you can use the absolute function of the left gyro button and move up and down to scroll through a tumbling menu of either channels (or chapters, depending on the Media being displayed).

Press F8, or the 'ambiance' button on the gyro remote, to control the 'ambiance' (the lights and volume). Move up and down to adjust the light level, left and right to adjust the volume level. Like with media playback, holding the button down while you move is 'absolute' mode -- all the way left is volume mute, right is full blast. Tap and release for relative mode -- the further you move to the left the faster the volume lowers.

With a mouse, the right button is the cancel/off; with the gyro remote it is marked 'X'. If you have a menu on the screen it makes the menu disappear. When there's no menu on screen, tap to stop whatever media you're playing. Press and hold to turn off the TV or to power down the system.

Thus with UI2 you can control the entire system using only the 3 buttons on the gyro remote (plus the ok and cancel buttons).

Retrieved from "http://wiki.linuxmce.org/index.php?title=Control_LinuxMCE_with_Gyro_Remote&oldid=32989"