Difference between revisions of "User:Seagullarity"

From LinuxMCE
Jump to: navigation, search
 
(3 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
__TOC__
 
__TOC__
 
==System Specs==
 
==System Specs==
 +
===BDP-S350===
 
===CORE===
 
===CORE===
−
 
 
Case: NORCO RPC-250 http://www.newegg.com/Product/Product.aspx?Item=N82E16811219022&cm_re=2u_server_case-_-11-219-022-_-Product
 
Case: NORCO RPC-250 http://www.newegg.com/Product/Product.aspx?Item=N82E16811219022&cm_re=2u_server_case-_-11-219-022-_-Product
  
Line 23: Line 23:
  
 
Firewire: NEC Corporation uPD72874 IEEE1394 OHCI
 
Firewire: NEC Corporation uPD72874 IEEE1394 OHCI
 +
===Insteon===
 +
75 SwitchLinc Dimmers, 17 Motion Sensors, 6 KeypadLinc, 10 LampLinc, 4 Access Point, 1 PLM
 +
===Media Directors===
 +
(4) ZBox HD ID11: http://forum.linuxmce.org/index.php?topic=10058.0
  
 +
(1)Acer Aspire Revo AR1600-U910H PC w/ 2GB RAM
 
===NAS===
 
===NAS===
−
 
 
D-Link DNS 343.
 
D-Link DNS 343.
 +
===Ruckus Wireless===
 +
===Technics SH-AC500D===
 +
Standalone AC3 and DTS decoder: http://www.chriscaudle.org/shac.html
 +
===WebDT===
 +
RAM: 2 Gigs of RAM purchased from tkmedia: http://forum.linuxmce.org/index.php?topic=7689.0
  
 +
NIC: Belkin N1 Wireless N Notebook MIMO 802.11n Card F5D8011
 
==Room by Room==
 
==Room by Room==
 
===Kitchen===
 
===Kitchen===
Line 68: Line 78:
 
Leviton QuickPort Shielded Flat Patch Panel
 
Leviton QuickPort Shielded Flat Patch Panel
 
==Setup Instructions==
 
==Setup Instructions==
 +
===DCX2496===
 +
===HD-PVR===
 +
1) Update the firmware by downloading drivers from the Hauppage website on and running them on a Windows machine.
 +
 +
2) Install the HDPVR drivers in linux from the mythTV wiki: http://www.mythtv.org/wiki?title=Hauppauge_HD-PVR&oldid=51870#HD-PVR_Driver_Compilation_Howto
 +
 +
3) Locked settings on STB down to 720p instead of 1080p.
 +
====Remote Controls====
 +
====MythTV====
 +
===Insteon===
 +
===IPMI===
 +
To install Java: sudo apt-get install sun-java5-jre sun-java5-plugin sun-java5-fonts
 +
 +
Firmware, Manual, and Utilities: http://www.tyan.com/product_accessories_spec.aspx?pid=63. Place uh8l-1.0.7 in /usr/local/bin and run: sudo uh8l-1.0.7 -d. Download firmware: M3296_S5211_R1.07-fls. In KVM Settings -> Keyboard/Mouse ->USB Mouse Type: select "Other Operating System" and the option "Auto Mouse Speed"
 +
 +
1) Set static IP on the CORE (192.168.1.2)
 +
 +
2) Enable port forwarding on the CORE: port 9999 -> 192.168.80.146
 +
 +
3) Enable port forwarding on the netgear router: port 9999 -> 192.168.1.2
 +
 +
4) Enable dynamic DNS on the router using dyndns.org. Enter username and password into the router web admin.
 +
 +
IPMI Web Admin: http://400beachdr.dyndns.org:9999
 +
===Lilliput Touchscreens===
 +
====7 Inch VGA====
 +
====7 Inch HDMI====
 +
====10.4 Inch====
 +
===Media Directors===
 +
====Zotac ZBox====
 +
=====Realtek Drivers=====
 +
=====HDMI Audio=====
 +
HDMI Audio on the Zbox: Follow the directions on this website for the G210. http://www.overclockers.com.au/wiki/Audio_over_HDMI_with_a_GT210/220. Run the alsa script using the normal workflow: -d > -c > -i > reboot. Unmute all four channels of the HDMI sound card in alsamixer. Then add the following line to /etc/modprobe.d/alsa-base.conf: options snd-hda-intel probe_mask=0xffff,0xfff2. Further information here: http://wiki.xbmc.org/?title=HOW-TO_set_up_HDMI_audio_on_nVidia_GeForce_G210,_GT220,_or_GT240#Getting_ALSA
 +
 +
HDMI Support: Have LinuxMCE detect presence of the ZBox (or its soundcard) and install the drivers correctly (see above). Update asound.conf in /usr/pluto/templates/ on the CORE and all MDs. In order to include the proper card and device numbers in MD's asound.conf, alter ListSoundCards.sh, SetupAudioVideo.sh, Start_LocalDevices.sh, UpdateAvailableSoundCards.sh, and Utils.sh on the MD. These files are in /home/singlegirlarity/CodeAndInstallers/LinuxMCE/Xine/Updated/BootScripts/. Then run SetupAudioVideo.sh on the MD, go into the web admin and select the proper sound card, and finally restart the MD.
 
===NAS===
 
===NAS===
 +
===Orbiter===
 +
Button Replacement: /usr/pluto/orbiter/Basic/menu2/Buttons/NowPlaying/shortbutton2.png
 +
 +
Pop VDR options: 5576
 +
 +
TV - info, guide, Recordings, Schedule, fav., back, Thumbnail, Resend A/V codes, live, Bookmark Channel, Change Inputs, Off
 +
 +
Info -> Progress Bar (or just Progress if Progress Bar won't fit onto one button)
 +
 +
guide -> Guide
 +
 +
fav. -> Favorites
 +
 +
back -> Back
 +
 +
Resend A/V codes -> Resend Codes or Resend A/V (whichever fits)
 +
 +
live -> Live
 +
 +
Bookmark Channel -> Bookmark
 +
 +
In the TV Remote Control menu:
 +
 +
info -> Info
 +
 +
guide -> Guide
 +
 +
Video - Random, Manage Playlist, Bookmarks, View Attributes, Resend A/V codes, Thumbnail, Zoom & Aspect, Off
 +
 +
Manage Playlist -> Playlist
 +
 +
View Attributes -> Attributes
 +
 +
Resend A/V codes -> Resend Codes or Resend A/V (whichever fits)
 +
 +
Zoom & Aspect -> Zoom/Aspect or just Aspect
 +
 +
***In the Video Remote Control menu:***
 +
 +
attib. -> Attrib.
 +
 +
file list -> File List
 +
 +
Resend A/V codes -> Resend A/V Codes
 +
 +
Manage playlist -> Manage Playlist
 +
 +
Audio - Random, Manage Playlist, Bookmarks, View Attributes, Resend A/V codes, Off
 +
 +
Manage Playlist -> Playlist
 +
 +
View Attributes -> Attributes
 +
 +
Resend A/V codes -> Resend Codes or Resend A/V (whichever fits)
 +
 +
Upon clicking a song title and going to the menu with Play, Close, Delete, Move, it should place the pointer over Play instead of the Performer Box in the upper right. Also, Move doesn't seem to do anything.
 +
 +
***In the Audio Remote Control menu:***
 +
 +
attrib.-> Attrib.
 +
file list -> File List
 +
Manage playlist -> Manage Playlist
 +
Resend A/V codes -> Resend A/V Codes
 +
 +
***Pictures -> Upload a picture to test it***
 +
 +
*** CableBox *** -> More -> info, guide, Recordings, Schedule, fav., back, Thumbail, Resend A/V codes, live, Bookmark Channel, Change Inputs, Off, guide, Menu, fav., live, back, info, Resend A/V codes, Record, Direct A/V, On Demand, Zoon & Aspect, Help, PVR Menu, back, Next day, Previous day, Page down, Page up
 +
 +
Cable Box -> Only keep Live, Progress Bar, Resend A/V, Off
 +
 +
Blu-Ray -> Eject, Stop, Subtitles, Angles, Audio Options, Menu, Resend A/V codes, Direct A/V, Home, Off. Delete everything other than Direct A/V and Off.
 +
 +
Roku -> Same as Blu-Ray. Delete everything other than Direct A/V and Off.
 +
 +
Resend A/V codes -> Resend A/V Codes
 +
===WebDT===
 +
1) Use WinSCP to upload PadOrbiter Image onto CORE, after disabling firewall (sudo ufw disable). Install PadOrbiter Image onto USB stick using DD: dd if=/home/seagullarity/Documents/webpad-gamma1.dd of=/dev/sdc. (It might be /sdb as well).
 +
 +
2) Install PadOrbiter software onto WebDT using USB stick.
 +
 +
3) Retrieve SSID from netgear (SSID should be NETGEAR) by logging in and going to Wireless Settings menu. Use none for security.
 +
 +
4) Enter SSID into /usr/local/bin/TabletCFG. If that doesn't work, check the /etc/network/interfaces configuration and run ifdown eth0, ifup eth0.
 +
 +
5) Download and install the LiveCD onto a USB stick: http://gparted.sourceforge.net/livecd.php. Use HP-USB to format the USB stick. Extract the zip file from the website. Grow the partition using gparted.
 +
 +
====Installing ath9k drivers for 802.11a on WebDT====
 +
1) Get to the command prompt by pressing Ctrl+T, then '.' , then choose applications/bash, while the progress bar is loading for the OnScreenOrbiter.
 +
 +
2) Download newest compat-wireless: http://wireless.kernel.org/download/compat-wireless-2.6/. Do "apt-get install bzip2". Then "bunzip2 compat-wirelessfile.tar.bz" and "tar -xvf compat-wirelessfile.tar".
 +
 +
3) Run apt-get update. Run apt-get install build-essential.
 +
 +
4) Run ./scripts/driver-select ath9k ; make ; sudo make install.

Latest revision as of 02:04, 7 July 2011

System Specs

BDP-S350

CORE

Case: NORCO RPC-250 http://www.newegg.com/Product/Product.aspx?Item=N82E16811219022&cm_re=2u_server_case-_-11-219-022-_-Product

PSU: EMACS MRW-6350P

Mobo: Tyan Toledo i3210W S5211G2NR LGA775 Xeon ATX Server MB

CPU: Intel Xeon 3065 Dual-Core @ 2.33Ghz

RAM: (2) KINGSTON KVR800D2E5/2G - 2GB 800MHZ DDR2 ECC CL5

SDMC: M3296 IKVM

Fan/Heatsink: Intel E30307-001 S775 Xeon Copper Core Fan and Heatsink

SSD: G.SKILL Phoenix Pro Series SSD 60G FM-25S2S-60GBP2 R. Issues are the TRIM command using hdparm may not work in kernel 2.6.27. Might need to update kernel, as tkmedia did.

DVD: Sony Optiarc DVD Burner

Firewire: NEC Corporation uPD72874 IEEE1394 OHCI

Insteon

75 SwitchLinc Dimmers, 17 Motion Sensors, 6 KeypadLinc, 10 LampLinc, 4 Access Point, 1 PLM

Media Directors

(4) ZBox HD ID11: http://forum.linuxmce.org/index.php?topic=10058.0

(1)Acer Aspire Revo AR1600-U910H PC w/ 2GB RAM

NAS

D-Link DNS 343.

Ruckus Wireless

Technics SH-AC500D

Standalone AC3 and DTS decoder: http://www.chriscaudle.org/shac.html

WebDT

RAM: 2 Gigs of RAM purchased from tkmedia: http://forum.linuxmce.org/index.php?topic=7689.0

NIC: Belkin N1 Wireless N Notebook MIMO 802.11n Card F5D8011

Room by Room

Kitchen

Television - Lilliput 10.4" Audio Pipes - MD (Stereo Out) -> 3.5mm to RCA Converter -> Amplifier -> Speaker Cable through walls -> Ceiling Speakers

Master Bedroom

Television - Panasonic Viera TH-42PX60U

Audio Pipes - MD (Stereo Out) -> 3.5mm to RCA Converter -> TV Audio-In -> RCA Audio-Out -> RCA-to-Cat5 -> Cat5 Cable through walls -> Cat5-to-RCA -> Amplifier -> Speaker Cable through walls -> Wall Speakers

Video Pipes - MD (DVI) -> DVI-to-HDMI Converter -> TV (HDMI 2)

Guest Suite

Television - Panasonic Viera TH-42PX60U

Audio Pipes - MD (Stereo Out) -> 3.5mm to RCA Converter -> TV Audio-In -> RCA Audio-Out -> RCA-to-Cat5 -> Cat5 Cable through walls -> Cat5-to-RCA -> Amplifier -> Speaker Cable through walls -> Wall Speakers

Video Pipes - MD (DVI) -> DVI-to-HDMI Converter -> TV (HDMI 2)

Den

Television - Pioneer Elite Pro-607PU (Pro-1540HD)

Audio Pipes - (MD) HDMI -> TV -> Digital Audio Out (TOSLink) -> TOSLink Extension through the walls into Tech Closet -> TOSLink into SH-AC500D -> DCX-2496 -> Amplifier -> Speaker Cable through walls -> Ceiling Speakers

Video Pipes - HDMI -> TV (HDMI 2)

Master Bath

Television - Vizio M220MV LCD LED HDTV w/ Vizio VR9 Remote Control

Audio Pipes - MD (Stereo Out) -> 3.5mm Cable -> TV Audio-In -> 3.5mm Audio-Out -> 3.5mm-to-Cat5 -> Cat5 Cable through walls -> Cat5-to-3.5mm -> Amplifier -> Speaker Cable through walls -> Ceiling Speakers Connector - DVI-1

Video Settings - 1280 720/60

TV Standard - 1024x768

PK_Size (Orbiter) - 1024x768

ScreenWidth (Orbiter) 1280

ScreenHeight (Orbiter) 720

Tech Closet

Leviton QuickPort Shielded Flat Patch Panel

Setup Instructions

DCX2496

HD-PVR

1) Update the firmware by downloading drivers from the Hauppage website on and running them on a Windows machine.

2) Install the HDPVR drivers in linux from the mythTV wiki: http://www.mythtv.org/wiki?title=Hauppauge_HD-PVR&oldid=51870#HD-PVR_Driver_Compilation_Howto

3) Locked settings on STB down to 720p instead of 1080p.

Remote Controls

MythTV

Insteon

IPMI

To install Java: sudo apt-get install sun-java5-jre sun-java5-plugin sun-java5-fonts

Firmware, Manual, and Utilities: http://www.tyan.com/product_accessories_spec.aspx?pid=63. Place uh8l-1.0.7 in /usr/local/bin and run: sudo uh8l-1.0.7 -d. Download firmware: M3296_S5211_R1.07-fls. In KVM Settings -> Keyboard/Mouse ->USB Mouse Type: select "Other Operating System" and the option "Auto Mouse Speed"

1) Set static IP on the CORE (192.168.1.2)

2) Enable port forwarding on the CORE: port 9999 -> 192.168.80.146

3) Enable port forwarding on the netgear router: port 9999 -> 192.168.1.2

4) Enable dynamic DNS on the router using dyndns.org. Enter username and password into the router web admin.

IPMI Web Admin: http://400beachdr.dyndns.org:9999

Lilliput Touchscreens

7 Inch VGA

7 Inch HDMI

10.4 Inch

Media Directors

Zotac ZBox

Realtek Drivers
HDMI Audio

HDMI Audio on the Zbox: Follow the directions on this website for the G210. http://www.overclockers.com.au/wiki/Audio_over_HDMI_with_a_GT210/220. Run the alsa script using the normal workflow: -d > -c > -i > reboot. Unmute all four channels of the HDMI sound card in alsamixer. Then add the following line to /etc/modprobe.d/alsa-base.conf: options snd-hda-intel probe_mask=0xffff,0xfff2. Further information here: http://wiki.xbmc.org/?title=HOW-TO_set_up_HDMI_audio_on_nVidia_GeForce_G210,_GT220,_or_GT240#Getting_ALSA

HDMI Support: Have LinuxMCE detect presence of the ZBox (or its soundcard) and install the drivers correctly (see above). Update asound.conf in /usr/pluto/templates/ on the CORE and all MDs. In order to include the proper card and device numbers in MD's asound.conf, alter ListSoundCards.sh, SetupAudioVideo.sh, Start_LocalDevices.sh, UpdateAvailableSoundCards.sh, and Utils.sh on the MD. These files are in /home/singlegirlarity/CodeAndInstallers/LinuxMCE/Xine/Updated/BootScripts/. Then run SetupAudioVideo.sh on the MD, go into the web admin and select the proper sound card, and finally restart the MD.

NAS

Orbiter

Button Replacement: /usr/pluto/orbiter/Basic/menu2/Buttons/NowPlaying/shortbutton2.png

Pop VDR options: 5576

TV - info, guide, Recordings, Schedule, fav., back, Thumbnail, Resend A/V codes, live, Bookmark Channel, Change Inputs, Off

Info -> Progress Bar (or just Progress if Progress Bar won't fit onto one button)

guide -> Guide

fav. -> Favorites

back -> Back

Resend A/V codes -> Resend Codes or Resend A/V (whichever fits)

live -> Live

Bookmark Channel -> Bookmark

In the TV Remote Control menu:

info -> Info

guide -> Guide

Video - Random, Manage Playlist, Bookmarks, View Attributes, Resend A/V codes, Thumbnail, Zoom & Aspect, Off

Manage Playlist -> Playlist

View Attributes -> Attributes

Resend A/V codes -> Resend Codes or Resend A/V (whichever fits)

Zoom & Aspect -> Zoom/Aspect or just Aspect

      • In the Video Remote Control menu:***

attib. -> Attrib.

file list -> File List

Resend A/V codes -> Resend A/V Codes

Manage playlist -> Manage Playlist

Audio - Random, Manage Playlist, Bookmarks, View Attributes, Resend A/V codes, Off

Manage Playlist -> Playlist

View Attributes -> Attributes

Resend A/V codes -> Resend Codes or Resend A/V (whichever fits)

Upon clicking a song title and going to the menu with Play, Close, Delete, Move, it should place the pointer over Play instead of the Performer Box in the upper right. Also, Move doesn't seem to do anything.

      • In the Audio Remote Control menu:***

attrib.-> Attrib. file list -> File List Manage playlist -> Manage Playlist Resend A/V codes -> Resend A/V Codes

      • Pictures -> Upload a picture to test it***
      • CableBox *** -> More -> info, guide, Recordings, Schedule, fav., back, Thumbail, Resend A/V codes, live, Bookmark Channel, Change Inputs, Off, guide, Menu, fav., live, back, info, Resend A/V codes, Record, Direct A/V, On Demand, Zoon & Aspect, Help, PVR Menu, back, Next day, Previous day, Page down, Page up

Cable Box -> Only keep Live, Progress Bar, Resend A/V, Off

Blu-Ray -> Eject, Stop, Subtitles, Angles, Audio Options, Menu, Resend A/V codes, Direct A/V, Home, Off. Delete everything other than Direct A/V and Off.

Roku -> Same as Blu-Ray. Delete everything other than Direct A/V and Off.

Resend A/V codes -> Resend A/V Codes

WebDT

1) Use WinSCP to upload PadOrbiter Image onto CORE, after disabling firewall (sudo ufw disable). Install PadOrbiter Image onto USB stick using DD: dd if=/home/seagullarity/Documents/webpad-gamma1.dd of=/dev/sdc. (It might be /sdb as well).

2) Install PadOrbiter software onto WebDT using USB stick.

3) Retrieve SSID from netgear (SSID should be NETGEAR) by logging in and going to Wireless Settings menu. Use none for security.

4) Enter SSID into /usr/local/bin/TabletCFG. If that doesn't work, check the /etc/network/interfaces configuration and run ifdown eth0, ifup eth0.

5) Download and install the LiveCD onto a USB stick: http://gparted.sourceforge.net/livecd.php. Use HP-USB to format the USB stick. Extract the zip file from the website. Grow the partition using gparted.

Installing ath9k drivers for 802.11a on WebDT

1) Get to the command prompt by pressing Ctrl+T, then '.' , then choose applications/bash, while the progress bar is loading for the OnScreenOrbiter.

2) Download newest compat-wireless: http://wireless.kernel.org/download/compat-wireless-2.6/. Do "apt-get install bzip2". Then "bunzip2 compat-wirelessfile.tar.bz" and "tar -xvf compat-wirelessfile.tar".

3) Run apt-get update. Run apt-get install build-essential.

4) Run ./scripts/driver-select ath9k ; make ; sudo make install.

Retrieved from "http://wiki.linuxmce.org/index.php?title=User:Seagullarity&oldid=28054"