Difference between revisions of "Hauppauge WinTV-PVR-350"

From LinuxMCE
Jump to: navigation, search
m (added to "tv cards" cat.)
 
(5 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
[[Category: Hardware]]
 
[[Category: Hardware]]
 +
{{versioninfo}}
 +
{| align="right"
 +
  | __TOC__
 +
  |}
 
[[Category: Video]]
 
[[Category: Video]]
 
[[Category: TV Cards]]
 
[[Category: TV Cards]]
  
 
* Manufacturer info: http://www.hauppauge.com/html/wintvpvr350_datasheet.htm
 
* Manufacturer info: http://www.hauppauge.com/html/wintvpvr350_datasheet.htm
−
* This card is automatically detected by LinuxMCE and is easily setup via the [[Setup Wizard]]
+
* This card is automatically detected by LinuxMCE using MythTV as the PVR backend, and is easily setup via the [[Setup Wizard]]
 +
*WARNING:
 
**The Decoder is not currently used by LinuxMCE
 
**The Decoder is not currently used by LinuxMCE
 +
**The InfraRed (IR) receiver is NOT supported by LinuxMCE
 +
**This card does NOT work with VDR as the PVR backend
  
 
===WinTV-PVR-350 includes:===
 
===WinTV-PVR-350 includes:===

Latest revision as of 17:01, 29 September 2010

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information
  • Manufacturer info: http://www.hauppauge.com/html/wintvpvr350_datasheet.htm
  • This card is automatically detected by LinuxMCE using MythTV as the PVR backend, and is easily setup via the Setup Wizard
  • WARNING:
    • The Decoder is not currently used by LinuxMCE
    • The InfraRed (IR) receiver is NOT supported by LinuxMCE
    • This card does NOT work with VDR as the PVR backend

WinTV-PVR-350 includes:

  • 125 channel cable ready TV tuner
  • Composite/s-video input to connect to VCR or camcorders
  • High quality MPEG1/MPEG2 video and audio encoder
  • High quality hardware MPEG-1/MPEG-2 a/v decoder
  • dbx-TV stereo decoder (Nicam stereo decoder in Europe)
  • IR remote control

The WinTV-PVR-350's TV tuner and S-Video/composite video inputs are for either PAL or NTSC.

MPEG record specifications:

  • MPEG1 recording at 1150K bits/sec (Video CD data rate)
  • MPEG2 record datarates:
    • 2MBit/sec, 4MBit/sec, 6Mbit/sec, 8Mbit/sec, 12Mbit/sec.
    • Selections for DVD Standard play (8MBitsec), DVD Long Play (4MBit/sec) and DVD Extra Long Play (2MBit/sec)
  • NTSC format* at 29.97fps: Full D1: 720x480, MPEG1: 352x240
  • PAL format* at 25fps: Full D1: 720x576, MPEG1: 352x288
  • Audio capture formats: 32/44.1/48 KHz, 16bit stereo, 192/224/384Kbits/sec
  • Chroma sampling: YUV 4:2:0
  • Video file format: .MPG
  • MPEG file tested compatible with: MediaStudio 6.0, MyDVD and DVD MovieFactory DVD authoring applications

MPEG hardware player specifications:

  • Will play MPEG-1 or MPEG-2 video files (.MPG) at up to 12 Mbits/sec
  • NTSC output: Full D1: 720x480, MPEG1: 352x240
  • PAL output: Full D1: 720x576, MPEG1: 352x288
  • Video outputs: S-Video and composite. SCART in Europe
  • Audio output: left and right audio connectors (RCA jacks)

System Requirements:

  • Processor requirements:
  • Pentium® II processor 600MHz or faster for TV pause with full screen playback
  • Free PCI slot
  • Sound card
  • DVD or CD-RW writer (optional for burning DVDs or Video CD’s)
  • VGA card (PCI or AGP) which supports video overlay (NVidia, S3, ATI, etc.)

Troubleshooting

  1. Currently the ivtv-firmware packages are not being installed by default along with the other ivtv packages, which means that the card is not initialized properly. The fix is simple: Alt-Ctrl-2 into a session and issue the following commands:
   apt-get install ivtv-firmware
   rmmod ivtv
   modprobe ivtv

This should give you a working card

Retrieved from "http://wiki.linuxmce.org/index.php?title=Hauppauge_WinTV-PVR-350&oldid=25639"