Difference between revisions of "Surveillance Cameras"
Perspectoff (Talk | contribs) |
Perspectoff (Talk | contribs) |
||
| Line 4: | Line 4: | ||
Also see: [[:Category:Cameras | Cameras Category]] | Also see: [[:Category:Cameras | Cameras Category]] | ||
| − | + | ==Introduction== | |
| − | + | ||
*[[Image:SurveillanceCameras.jpg|thumb|250px|Surveillance Cameras Page Admin Webiste]]<p>The best surveillance cameras are the IP based models, such as those by Panasonic. These cameras are [[Plug&play|Plug&Play]] (just plug them into any network jack). They do not require configuration. Plus, many of these cameras support pan/tilt and zoom so you can control them through the [[Orbiter]]. | *[[Image:SurveillanceCameras.jpg|thumb|250px|Surveillance Cameras Page Admin Webiste]]<p>The best surveillance cameras are the IP based models, such as those by Panasonic. These cameras are [[Plug&play|Plug&Play]] (just plug them into any network jack). They do not require configuration. Plus, many of these cameras support pan/tilt and zoom so you can control them through the [[Orbiter]]. | ||
Revision as of 00:44, 25 May 2008
Also see: Cameras Category
Introduction
The best surveillance cameras are the IP based models, such as those by Panasonic. These cameras are Plug&Play (just plug them into any network jack). They do not require configuration. Plus, many of these cameras support pan/tilt and zoom so you can control them through the Orbiter.
- If you have regular analog cameras you will need to add a Linux-compatible video capture board to your Core, and then attach the cameras to it. Add the video capture board on the LinuxMCE Admin Website-->Wizard-->Devices-->Interfaces page. Then add each surveillance camera, specifying that they are 'controlled by' the Motion device wrapper (which monitors the video capture board). For more detailed info see here.
There are several settings for each camera. You can save video "All the time", meaning LinuxMCE will constantly record the video from the camera and save it on the Core. This can take up quite a bit of hard disk space, though. Alternatively you can save video "Only when motion is detected". LinuxMCE will only save the video when it detects movement. If you choose "Don't capture", then you will still be able to view the cameras live, but LinuxMCE will not keep an archive.
If you do want an archive, be sure to indicate how many days you want LinuxMCE to keep the archive. The default is 10 (days), meaning LinuxMCE will erase any video archive that is more than 10 days old. If you are running out of disk space on the Core you can reduce this number (so not so much disk space is taken up with video archives).