Difference between revisions of "Technisat SkyStar2"
From LinuxMCE
(New page: Image:Technisat SkyStar2.jpg == Description == This budget DVB-S card works out the box with 0710 and 0810.) |
|||
| Line 1: | Line 1: | ||
| + | [[Category: Hardware]] | ||
| + | [[Category: Video]] | ||
| + | [[Category: TV Cards]] | ||
| + | [[Category: DVB-S]] | ||
| + | |||
[[Image:Technisat SkyStar2.jpg]] | [[Image:Technisat SkyStar2.jpg]] | ||
| Line 4: | Line 9: | ||
This budget DVB-S card works out the box with 0710 and 0810. | This budget DVB-S card works out the box with 0710 and 0810. | ||
| + | |||
| + | == Specification == | ||
| + | |||
| + | * Tuner Type: NIM | ||
| + | |||
| + | * L-Band Receiving Frequency Range: 950 - 2150 MHz | ||
| + | |||
| + | * RF-/Input Signal Level: -65 dBm to -25 dBm | ||
| + | |||
| + | * LNB Support: 13v/18v (automatic detection), 350mA maximum | ||
| + | |||
| + | * DiSEqC Support: only 1.0 (switching frequencies) | ||
| + | |||
| + | * SCPC and MCPC Support: Both; Symbol Rate: 2-45 MS/sec | ||
| + | |||
| + | * External Connectors: F Type (female) | ||
| + | |||
| + | * Nominal Input Impedance: 75 ohm | ||
| + | |||
| + | * Antenna Control Signal: 22 kHz | ||
| + | |||
| + | * Overload and Short Circuit Protection: Neither. | ||
| + | |||
| + | * Maximum Input Rate for QPSK (quadrature phase shift keying): 85 Mbps | ||
| + | |||
| + | * Power Consumption: < 17W | ||
| + | |||
| + | == See also == | ||
| + | |||
| + | * [http://www.devhardware.com/c/a/Peripherals/TechniSat-SkyStar-2-DVB-S-Satellite-PCI-Card/ Review] the Technisat SkyStar2 | ||
| + | * [http://www.technisat.com Producer's ] site | ||
Revision as of 10:37, 8 July 2009
Description
This budget DVB-S card works out the box with 0710 and 0810.
Specification
- Tuner Type: NIM
- L-Band Receiving Frequency Range: 950 - 2150 MHz
- RF-/Input Signal Level: -65 dBm to -25 dBm
- LNB Support: 13v/18v (automatic detection), 350mA maximum
- DiSEqC Support: only 1.0 (switching frequencies)
- SCPC and MCPC Support: Both; Symbol Rate: 2-45 MS/sec
- External Connectors: F Type (female)
- Nominal Input Impedance: 75 ohm
- Antenna Control Signal: 22 kHz
- Overload and Short Circuit Protection: Neither.
- Maximum Input Rate for QPSK (quadrature phase shift keying): 85 Mbps
- Power Consumption: < 17W
See also
- Review the Technisat SkyStar2
- Producer's site
