Difference between revisions of "Merten 506004 Connect Radio Transmitter FM 4gang"
From LinuxMCE
m |
Wierdbeard65 (Talk | contribs) m |
||
Line 2: | Line 2: | ||
[[Category: Lighting]] | [[Category: Lighting]] | ||
[[Category: ZWave]] | [[Category: ZWave]] | ||
− | + | {{versioninfo}} | |
[[Image:Merten-506004.png|thumb|200px|Merten 506004]] | [[Image:Merten-506004.png|thumb|200px|Merten 506004]] | ||
= Status = | = Status = |
Revision as of 09:09, 2 May 2010
Version | Status | Date Updated | Updated By |
---|---|---|---|
710 | Unknown | N/A | N/A |
810 | Unknown | N/A | N/A |
1004 | Unknown | N/A | N/A |
1204 | Unknown | N/A | N/A |
1404 | Unknown | N/A | N/A |
Usage Information |
Contents
Status
Working
About
The Merten 506004 is a 4gang Z-Wave battery powered remote controller that fits into a rocker box behind existing switches.
Features
- 4gang
- special door bell mode (not yet tested)
Device setup
Device type: Controller
Inclusion/Exclusion/Node Info Frame
- triple click on connected switch
Input setup
Input | Association Group | Parameter no | Wire pair |
---|---|---|---|
1 | 1 | 0 | red/white-red |
2 | 2 | 1 | green/white-green |
3 | 3 | 2 | brown/white-brown |
4 | 4 | 3 | blue/white-blue |
Parameter values
Function | Value |
---|---|
Switching/Dimming/Shutters |
0 |
Switching single-surface |
4 |
Doorbell function |
44 |
Move shutter single surface (changes direction each press) |
54 |
Lower shutter as long as button is pressed |
52 |
Raise shutter as long as button is pressed |
55 |
Factory reset
- Press any button 3 times within 1.5 seconds. The LED will flash.
- Press and hold the button for about 5 seconds until the LED turns off.
Links
http://www.merten.de/download/DL_broschueren/DE_FunkSystem_CONNECT_494720.pdf