Revision as of 03:55, 5 January 2010

Core/MD Hybrid

Hardware

(This is a one network card installation)

• Asus T3-P5945GCX Barebones with 3.00GHz Pentium 4
• Nvidia GeForce 6600 256 MB PCI-E 16x Video Card (DVI Output)
• 2 GB Generic RAM
• 80 GB Seagate ST380215A Hard Drive (for the OS and temporary media storage)
• 1 TB Western Digital 10EAVS External Hard drive (for media storage)
• DVDRAM GSA-4167B

Peripherals and Accessories

• 24 inch Sceptre LCD Monitor (DVI)
• 5.1 Channel Creative Sound System
• Gigaware microphone
• Generic USB 5 Button Wireless Optical Mouse with Scroll Wheel
• Generic Wireless PS/2 keyboard
• Ezonics EZCam USB Webcam
• Microsoft NX-6000 Webcam
• Generic 7-port USB Hub
• USB Bluetooth Dongle with CSR chipset
• HP Deskjet 2545 USB Printer

Software

• LinuxMCE 0810 beta2

X10 Devices

Controlling

• Controller: CM11A
• Remote: KR22A

Controlled

• LM465 is dimmable
• AM466 is not dimmable
• RR501 is not dimmable and is a remote control receiver (Can only be unit code 1 or 9)

 Device Code | Module | Description
      B1     | RR501  | Sound System Power
      B2     | LM465  | Floor Light
      B3     | LM465  | Light Tree
      B4     | LM465  | Desk Light
      B5     | AM466  | Monitor Power
      B6     | AM466  | Rope Lights & Strobe Light
      B7     | AM466  | Fan
      B8 ------------------------------------------
      B9     | RR501  | Black Lights

The Installation

LMCE 0810 beta2 Installation

1. Followed the internet installation instructions located here
2. Upon reboot, I temporarily hooked the monitor to VGA to go through AVWizard
3. Chose DVI output, 1080p, 60 Hz, OpenGL with Alpha Blending, stereo sound, 100% volume, and hit I Agree
4. Upon finishing the AVWizard, there was a grey screen with large text displaying each package that was installed
5. This continued until it got to the Orbiter Regeneration
6. After the orbiter regeneration, I had the infamous grey screen with a cursor
7. I used Alt-F2 to get to get to tty2, and logged in
8. I edited the /etc/network/interfaces file as such:

    auto lo
    iface lo inet loopback
    auto eth0
    iface eth0 inet static
       address 192.168.200.42
       netmask 255.255.255.0
       gateway 192.168.200.1
    auto eth0:1
    iface eth0:1 inet static
       address 192.168.80.1
       netmask 255.255.255.0

1. After rebooting, I was greeted with the Setup Wizard which stepped me through the rest of the install process
2. That's it, after some more big text, MCE started up fine and I was greeted with some Flikr pictures

External Hard Drive

1. After plugging in the external hard drive, I was asked if I wanted to use it.
2. After selecting "use without modifying" the drive was set up by MCE
3. I then went into the web admin > Files & Media > Media Files Sync
4. Navigated to the hard drive and resynchronized my Movies folder and Music Folder

Configure 5.1 Channel Sound

selecting stereo in the AVWizard does not enable multi-channel analog audio...this is how to fix it

1. web admin > Wizard > Devices> Media Directors
2. At the bottom of the media director device settings, change the "Audio Settings" Drop-Down menu to "Multi-channel analog"
3. Open terminal and run 'sudo alsamixer'
4. In alsamixer, use the arrow keys and 'M' to unmute and adjust the volume of surround, center, and LFE (side if you have 7.1)

Auto-start KDE desktop behind MCE on boot

Edit /etc/init.d/linuxmce to contain

StartService "KDE Desktop" "/usr/pluto/bin/Start_KDE.sh"

after starting the the other services (I don't know if it matters where this line goes in this script)

X10 interface and lighting setup

1. Plugged in all of my X10 modules and gave them the unit codes described above