Difference between revisions of "Sony KDL-46W4500"

Revision as of 09:39, 3 April 2009

I am using an European version this TV and will try to describe problems I have here.

Connected to a Nvidia 7300GT with an DVI to HDMI cable.

I was not able to get the TV setup to 1080p with 50hz, so I choosed 1080p and 60hz. Then afterwards I changed the xorg.conf and changed/added the folowing lines :

Option         "UseEDIDDpi" "false"
Option         "UseEDID" "true"

Modes       "1920x1080_50"
VertRefresh     49-51

and rebooted. After that I had 50hz.

The line "1920x1080_50" uses the EDID information it gets of the TV and sets things up correctly. In the /var/log/Xorg.0.log you can then see that it chooses the right resolution.

"UseEDIDDpi" "false" is important, otherwise you will get very small unreadable characters.

Alternate solution (I used first).

I was not able to get the TV setup to 1080p with 50hz, so I choosed 1080p and 60hz. Then afterwards I changed the xorg.conf to the right 1080p@50hz Modeline i found in the HDTV list in the MythTV modeline database.

       # 1920x1080 @ 50 Hz (EDID) HSync: 56.25 kHz
       ModeLine "1920x1080" 148.50 1920 2448 2496 2640 1080 1084 1089 1125 +HSync +VSync

And changed the VertRefresh to :

       VertRefresh     49-51

and rebooted. After that I had 50hz.

My latest xorg.conf

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg 

Section "Files"
EndSection

Section "InputDevice"
       Identifier      "Generic Keyboard"
       Driver          "kbd"
       Option          "CoreKeyboard"
       Option          "XkbRules"      "xorg"
       Option          "XkbModel"      "pc105"
       Option          "XkbLayout"     "dk"
       Option          "XkbVariant"    "basic"
EndSection

Section "InputDevice"
       Identifier      "Configured Mouse"
       Driver          "mouse"
       Option          "CorePointer"
       Option          "Device"                "/dev/input/mice"
       Option          "Protocol"              "ImPS/2"
       Option          "ZAxisMapping"          "4 5"
       Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
       Driver          "wacom"
       Identifier      "stylus"
       Option          "Device"        "/dev/input/wacom"
       Option          "Type"          "stylus"
       Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
       Driver          "wacom"
       Identifier      "eraser"
       Option          "Device"        "/dev/input/wacom"
       Option          "Type"          "eraser"
       Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
       Driver          "wacom"
       Identifier      "cursor"
       Option          "Device"        "/dev/input/wacom"
       Option          "Type"          "cursor"
       Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "Device"
       Identifier      "ATI Technologies Inc ATI"
       Driver      "fglrx"

       # Driver                "vesa"
       # BusID         "PCI:1:5:0"
       Option "XvmcUsesTextures" "true"
       Option "renderAccel" "true"
       Option "NoDDCValue"
       Option "UseEDID" "false"
       Option "ExactModeTimingsDVI" "true"
       Option "NoLogo" "true"
       Option "NoBandWidthTest" "true"
       Option "ModeValidation" "NoDFPNativeResolutionCheck, NoEdidMaxPClkCheck, NoMaxPClkCheck, AllowInterlacedModes, AllowNon60HzDFPModes"
       Option "DynamicTwinView" "false"
       Option "UseEvents" "true"
       Option          "ConnectedMonitor" "DFP"
EndSection

Section "Monitor"
       Identifier      "SyncMaster"
       Option          "DPMS"

       # 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz

       # 1920x1080 @ 25 Hz (EDID) HSync: 28.125 kHz
       #                 # 1920x1080 @ 50 Hz (EDID) HSync: 56.25 kHz
       #
# FROM xorglog  Default mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 56.2 kHz, 50.0 Hz
       Modeline        "1920x1080" 148.5 1920 1960 2016 2200 1080 1082 1088 1125
       HorizSync       20-500
       VertRefresh     59-61
EndSection

Section "Screen"
       Identifier      "Default Screen"
       Device          "ATI Technologies Inc ATI"
       Monitor         "SyncMaster"
       DefaultDepth    24
       SubSection "Display"
               Modes           "1920x1080"
               Virtual         1920 1080
       EndSubSection
       Option "XvmcUsesTextures" "true"
       Option "renderAccel" "true"
       Option "NoDDCValue"
       Option "UseEDID" "false"
       Option "ExactModeTimingsDVI" "true"
       Option "NoLogo" "true"
       Option "NoBandWidthTest" "true"
       Option "ModeValidation" "NoDFPNativeResolutionCheck, NoEdidMaxPClkCheck, NoMaxPClkCheck, AllowInterlacedModes, AllowNon60HzDFPModes"
       Option "DynamicTwinView" "false"
       Option "UseEvents" "true"
       Option  "TVStandard"    "1080p"
EndSection

Section "ServerLayout"
       Identifier      "Default Layout"
       Screen          "Default Screen"
       InputDevice     "Generic Keyboard"
       InputDevice     "Configured Mouse"

# Uncomment if you have a wacom tablet
#       InputDevice     "stylus"        "SendCoreEvents"
#       InputDevice     "cursor"        "SendCoreEvents"
#       InputDevice     "eraser"        "SendCoreEvents"
EndSection
Section "Extensions"
       Option "Composite" "false"
       Option "RENDER" "true"
EndSection