Difference between revisions of "Merten 5072xx Connect Radio Push Button 4gang"
From LinuxMCE
m |
m |
||
Line 1: | Line 1: | ||
− | [[Category: | + | [[Category: Automation]] |
[[Category: Lighting Automation]] | [[Category: Lighting Automation]] | ||
[[Category: ZWave]] | [[Category: ZWave]] |
Revision as of 01:42, 11 August 2009
Contents
Status
Working
About
The Merten 5072xx is a 2-surface, 4-gang Z-Wave battery powered remote controller that can be screwed or stuck to a surface.
Features
- dual surface, 4-gang
- special door bell mode (not yet tested)
Device setup
Device type: Controller
Inclusion/Exclusion/Node Info Frame
- triple click on connected switch
Input setup
Button | Association Group | Parameter no |
---|---|---|
Top Left | 1 | 0 |
Bottom Left | 2 | 1 |
Top Right | 3 | 2 |
Bottom Right | 4 | 3 |
Parameter values
Function | Value |
---|---|
Switching/Dimming/Shutters |
0 |
Switching single-surface |
4 |
Retrieve scene |
60 |
Doorbell function |
44 |
Move shutter single surface (changes direction each press) |
54 |
Lower shutter as long as button is pressed |
52 |
Raise shutter as long as button is pressed |
55 |
Factory reset
- Press button 3 times within 1.5 seconds. The LED will flash.
- Press and hold the button for about 5 seconds until the LED turns off.