Difference between revisions of "Serial Card (Syba)"
(Created page with "{{versioninfo|810Status=applies|810UpdatedDate=25 Aug 2011|810UpdatedBy=twodogs}} Category: Tutorials Category: Hardware Category:Telecom Category:VoIP {| align="...") |
|||
| Line 1: | Line 1: | ||
| − | {{versioninfo|810Status=applies|810UpdatedDate= | + | {{versioninfo|810Status=applies|810UpdatedDate=10 Oct 2011|810UpdatedBy=twodogs}} |
[[Category: Tutorials]] | [[Category: Tutorials]] | ||
| − | |||
| − | |||
[[Category:VoIP]] | [[Category:VoIP]] | ||
{| align="right" | {| align="right" | ||
| Line 8: | Line 6: | ||
|} | |} | ||
| + | This tutorial covers how to install the Syba SY-PCI15001 expansion card. This costs about $35, has 6 serial ports, and uses the MOSCHIP MCS9865 chip. Moschip doesn't have a stellar record with Linux, but the drivers have been recently updated and the price is right. Not exactly plug/play, but it shouldn't take too long to install by following this tutorial. | ||
| − | |||
| − | + | ==Overview== | |
| − | + | The Syba card ships with out of date drivers, so we'll use the latest from Moschip drivers. Following the instructions will result in 2 working ports that LinuxMCE can't recognize (because they're ttyD instead of ttyS). The remaining 4 ports ttyS will be recognized, but they won't work with LMCE because the standard driver configuration is wrong (need to have hardware flow control enabled). Also, grub only sets up 4 ports, two of which are typically allotted to the motherboard. So, here is what to do... | |
| + | *edit grub configuration to allow 8 ports | ||
| + | *edit the Moschip driver file to permit hardware flow control before compiling | ||
| + | *compile the driver | ||
| + | *modify the LMCE script "ListSerialPorts.sh" to recognize the ttyD ports | ||
| − | == | + | |
| + | |||
| + | http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=125;74;111&PLine=74 | ||
Revision as of 03:33, 11 October 2011
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | applies | 10 Oct 2011 | twodogs |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Contents |
This tutorial covers how to install the Syba SY-PCI15001 expansion card. This costs about $35, has 6 serial ports, and uses the MOSCHIP MCS9865 chip. Moschip doesn't have a stellar record with Linux, but the drivers have been recently updated and the price is right. Not exactly plug/play, but it shouldn't take too long to install by following this tutorial.
Overview
The Syba card ships with out of date drivers, so we'll use the latest from Moschip drivers. Following the instructions will result in 2 working ports that LinuxMCE can't recognize (because they're ttyD instead of ttyS). The remaining 4 ports ttyS will be recognized, but they won't work with LMCE because the standard driver configuration is wrong (need to have hardware flow control enabled). Also, grub only sets up 4 ports, two of which are typically allotted to the motherboard. So, here is what to do...
- edit grub configuration to allow 8 ports
- edit the Moschip driver file to permit hardware flow control before compiling
- compile the driver
- modify the LMCE script "ListSerialPorts.sh" to recognize the ttyD ports
http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=125;74;111&PLine=74
