Mac MediaDirector: Difference between revisions
Created page with "== Setup a Mac as MediaDirector ==" |
|||
| Line 1: | Line 1: | ||
== Setup a Mac as MediaDirector == | == Setup a Mac as MediaDirector == | ||
* Download DMG File: http://deb.linuxmce.org/refit-syslinux-gpxe_small_v2.dmg (it contains all partitions and files needed) | |||
* Open .dmg-File and plug in usb drive | |||
* Open disk utilities | |||
* '''deactivate''' partitions of .dmg-File and USB stick using "Disk Utility" on Mac. DO NOT UNMOUNT! | |||
* get device names using "Disk Utility": command+i shows the device identifier, when its deactivated the device names gets an "r" as prefix | |||
** dmg: disk1 -> rdisk1 | |||
** usb: disk2 -> rdisk2 | |||
'''Write DMG File to USB:''' | |||
dd if=/dev/rdisk1 of=/dev/rdisk2 bs=1m | |||
Boot your Mac with USB plugged in. Hold down alt/option to get the boot menu. Select **refit** and wait. | |||
If all runs smooth, you should see a menu showing "LinuxMCE" and it will start boot gpxe in 2 seconds. | |||
Revision as of 11:11, 18 September 2012
Setup a Mac as MediaDirector
- Download DMG File: http://deb.linuxmce.org/refit-syslinux-gpxe_small_v2.dmg (it contains all partitions and files needed)
- Open .dmg-File and plug in usb drive
- Open disk utilities
- deactivate partitions of .dmg-File and USB stick using "Disk Utility" on Mac. DO NOT UNMOUNT!
- get device names using "Disk Utility": command+i shows the device identifier, when its deactivated the device names gets an "r" as prefix
- dmg: disk1 -> rdisk1
- usb: disk2 -> rdisk2
Write DMG File to USB:
dd if=/dev/rdisk1 of=/dev/rdisk2 bs=1m
Boot your Mac with USB plugged in. Hold down alt/option to get the boot menu. Select **refit** and wait. If all runs smooth, you should see a menu showing "LinuxMCE" and it will start boot gpxe in 2 seconds.