Difference between revisions of "D-Link DCS-920"

Revision as of 08:34, 21 October 2012

Version	Status	Date Updated	Updated By
710	Unknown	N/A	N/A
810	Unknown	N/A	N/A
1004	Unknown	N/A	N/A
1204	Unknown	N/A	N/A
1404	Unknown	N/A	N/A
Usage Information

IP cameras can be used under the Motion Wrapper to enable it to detect motion and alert based on that function.

Open your webadmin control panel and on the left pane at the bottom click on Show Device Tree.
In the left pane Click on core/hybrid.
On the right pane near the top, click on Create Child Device, then leave everything blank and click Pick Device Template button.
Click the pull down box under Device Template and find the template labeled Motion Wrapper, select this item and click Pick Device Template

Now on the right pane, click Create Child Device again. Enter your IP Cameras IP address and MAC address here, then click Pick Device Template
Click the pull down box under Device Template and use Generic Motion IP Camera, then click Pick Device Template
Now on the right window pane, under Device Info fill in your camera's MAC address, it is located on a sticker on the back of the camera.
Still on the right window pane, scroll down to Device Data and fill in the following

PATH: /VIDEO.CGI

TCP PORT: 80

USERNAME: <username you assigned>

PASSWORD: <password you assigned>

Now click save at the bottom, RESTART your router
on your mce interface, go to Security -> Generic Analog Camera to see if it's working.

@@ Line 52: / Line 52: @@
 == Checking for video ==
-* Now click save at the bottom, RESTART your router, and on your mce interface go to '''Security''' -> '''Generic Analog Camera''' to see if it's working.
+* Now click save at the bottom, RESTART your router
+* on your mce interface, go to '''Security''' -> '''Generic Analog Camera''' to see if it's working.
 {{p}}