Difference between revisions of "Proposed Asterisk Dialplan"

Revision as of 06:30, 18 July 2013

We desperately need to write a new Asterisk dial plan to replace the AMP generated one that has become far too bit-rotten to be of any substantial use. This page will track the conceptual flow of what will be needed for the new post Asterisk 1.8+ dialplan.

This is being added to, as I write more and more of the schema, and will get much...much bigger. --Tschak909 07:30, 18 July 2013 (CEST)

Dial Plan Flow

Call from outside line (1xx)

• Call comes in from outside line
  • Get house mode and branch between five possible states:
    • Ring extensions
      • All checked extensions (2xx) are rung in parallel.
    • Transfer to a specific user
      • Transfer to specified (3xx) extension
    • Go to a specific user's voicemail
      • Transfer to selected user's voicemail
    • Present a menu to select Home user (101)
      • Is the number listed in Callers for me(?) for a user.
        • Transfer to user extension. (3xx)
      • Present menu audio, and select between options:
      • If explicit extension is selected, ring said extension. (Do we want to allow all extensions to be pressed here?)
      • If User number is selected, Transfer to user (3xx)
      • If General Voicemail, drop to general voicemail box (100)
    • Transfer to outside number
      • Dial outside #

Ring specific extension (2xx)

• Does current house mode allow extension to be rang?
  • No? Bounce to Menu (101)
  • Yes? ...then
    • Ring specified extension
      • While ringing, user has the opportunity to:
        • Transfer to a specific phone (2xx)
        • Transfer to a specific user (3xx)
        • Transfer to an outside number (dial specified number given to dial pad)
        • dial someone else in to conference before we all pick up (this is strange, but the button is there!)
        • Send to General voicemail (100)
        • Drop the call
      • If extension does not pick up within specified IVR delay time, Transfer to (101) for IVR menu

Ring specific user (3xx)

• Find user via AGI script, map to a list of (2xx) extensions.
• Is number on Priority caller list?
  • No, it is a normal caller, Process normal caller routing (see normal/priority user routing below)
  • Yes, it is a priority caller, Process priority caller routing (see normal/priority user routing below)

Normal/Priority User Routing

For each user, there is a set of routing steps to be executed serially, depending on if the user is a normal or priority caller, and then based on the current USER mode. A user is a priority caller if they are listed in the priority callers list. Any number of steps can be created, and a dial plan segment should be created for each one.

• Get house mode
  • If Normal caller, select normal caller steps given house mode
  • If Priority caller, select priority caller steps given house mode
  • If checkbox is selected for give option for voicemail, play message, listen for "#"
    • If checkbox selected, and If # pressed, go to user voicemail
    • Execute next step which is one of four possible states: (TOP)
      • Ring Extensions
        • Parallel ring selected extensions (2xx)
      • Transfer to another user
        • Transfer call to specified (3xx) extension
      • Go to user's voicemail
        • Transfer call to specified user voicemail
      • Transfer to an outside number
    • Loop back around to (TOP)
  • If all instructions are carried out and still unresolved, drop back to menu (101)

Security Plugin Phone Extensions

Security Notfiications (999)

• run AGI to determine which rooms have been affected, generate audio message
• Determine priority in the following order
  • Orbiters then Other numbers (uses one outgoing channel)
    • Ring each orbiter for 15 seconds, if no answer, then ring the next orbiter
      • If answer, Play Security IVR
    • If no more orbiters, ring each "other number" for 15 seconds, if no answer, then ring next other number.
      • If answer, Play security IVR
    • (what to do here if everybody has been rung, and no answer?)
  • Other numbers then Orbiters (uses one outgoing channel)
    • Ring each "other number" for 15 seconds, if no answer, then ring the next number.
      • If answer, Play security IVR
    • If no more "other numbers", ring each Orbiter for 15 seconds, if no answer, then ring the next orbiter.
  • Both orbiters and other numbers at the same time. (uses two outgoing channels)
    • spawn two threads, one for "Orbiters" one for "Other numbers", for each thread
      • Ring each number for 15 seconds, if no answer, then ring the next number.
        • If answer, Play security IVR
      • (What to do when all numbers have been rung?)

Security IVR

• 1 to Reset the Alarm
  • Play "Alarm has been reset."
• 2 to Ignore the alarm
• 3 to call emergency contacts
• 4 to Notify neighbors
• 5 to speak to the person in the house

Lists for...

House Modes

• Armed - At Home
• Armed - Away
• Armed - Extended Away
• Entertaining
• Sleeping
• Unarmed - At Home

User Modes

• At Home
• Away
• Do Not Disturb
• Sleeping

Incoming Call extensions

• 100 - General Voicemail box
• 101 - IVR menu

Example Phone extensions

• 201 - Living Room
• 202 - Bedroom Master
• 203 - Den
• ...

Example User extensions

• 301 - Thom
• 302 - Lana
• 303 - Nina
• ...

Example User voicemail extensions

• 401 - Thom
• 402 - Lana
• 403 - Nina

Security Extensions

• 999 - Security
• 998 - Fire
• 997 - Air Quality
• 996 - Movement
• 995 - Information
• 994 - Doorbell
• 993 - Monitor Mode
• 992 - Babysitter Mode
• 991 - Speak to person inside house (this needs to be changed in all the code, this was 998)