User:Afkpuz

Currently, I am only running one hybrid at the moment which is plugged into a generic LCD tv. Also, I'm using generic 5.1 analog surround sound speakers.

Motherboard

Foxconn 945P7AA-8KS2

CPU Type Pentium D / Pentium 4 HT / Celeron D FSB 1066/800MHz North Bridge Intel 945P South Bridge Intel ICH7

Memory Number of Memory Slots 4×240pin Memory Standard DDR2 667 Channel Supported Dual Channel

Expansion Slots PCI Express x16 1 PCI Express x1 2 PCI Slots 3

Storage Devices PATA 3 x ATA100 6 Dev Max. SATA 3Gb/s 4

Onboard Audio Audio Chipset Realtek ALC880 Audio Channels 8 Channels

Onboard LAN LAN Chipset Broadcom BCM5789KFB Max LAN Speed 10/100/1000Mbps

Rear Panel Ports USB 4 x USB 2.0 S/PDIF Out 1x Coaxial Audio Ports 6 Ports Onboard USB 4 x USB 2.0

Video Card

MSI NX8400GS-TD512E GeForce 8400 GS 512MB 64-bit GDDR2 PCI Express x16 Video Card

This card works very well. Driver is automatically installed in both DVD and CD install method.

Ram

pqi 2GB 240-Pin DDR2 SDRAM DDR2 667 (PC2 5400)

TV Capture Cards

Hauppauge WinTV-PVR 500 MCE Dual tuners onboard with MPEG2 encoders for each.

Input Devices

Logitech 967557-0403 wireless keyboard and mouse

Fiire Chief gyration remote

Things of note

Sometimes, after going to the KDE desktop, mixer settings are set to zero. I just put the volume back to normal when this happens. I also reboot after I'm finished using the KDE desktop just to save cpu consumption and to avoid that problem. Now, since I use s/pdif coax, this problem is gone. Also note, desktop sounds, like the KDE log in sound scratchy through s/pdif coax. Linuxmce sounds work great though, so not a big deal

TV tuner is fully supported and detected during normal setup. However, LMCE defaults the channel frequency table to us-broadcast. That means I only receive channels 2-11. I usually go into mythtv and change it manually.

Fiire remote is plug and play.

I've noticed that this particular motherboard has some weird quirks. If I leave the computer off for a day or so, the bios gets corrupted and reverts to default settings. This is no big deal as I just change the settings back to what they were and no need to reinstall. I think this is just some bug with my particular one and not the model in general.