AMPS with RS-232

From LinuxMCE
Revision as of 19:02, 28 October 2009 by Tkmedia (Talk | contribs)

Jump to: navigation, search

Controlling AV equipment via IR is at best tedious. Controlling devices via a cabled RS-232 connection is much safer. This page is meant as a pooling place for AMPS with RS-232 ports. It does not mean, there is plug and play support for the device, nor is this some kind of endorsement for the listed products.

NAD T765

T765 Plug and Play with 0810


T765 A/V Receiver Features

   * 7 x 80W Simultaneous Full Disclosure Power
   * 7 x 140W Minimum Continuous Power (FTC)
   * PowerDrive™ amplifier technology
   * Holmgren™ Toroidal Power Supply
   * Modular construction for simple upgrade and service
   * Audyssey Auto Setup and Calibration of all speaker settings using supplied microphone
   * Data Port for use with optional NAD IPD 1 Dock for iPod®
   * Dolby Digital, Dolby Digital EX, ProLogic II, ProLogic IIx, DTS, DTS ES, DTS 24/96, DTS NEO:6, EARS and Stereo Enhanced Surround Modes
   * 5 A/V Custom Presets store unique listening modes, DSP options, tone, speaker and display settings
   * Direct speaker level adjustment for surround, center and sub
   * NAD Soft Clipping™
   * Burr-Brown 24 bit 96kHz A/D converter
   * Burr-Brown 24 bit 192kHz Stereo D/A converters (x5)
   * Texas Instruments Aureus™ 7.1 DSP (32 bit dual core floating point design)
   * 3 1080p HDMI Video Inputs switch to 1 Output, freely assignable
   * Cross Conversion of all analog video formats
   * 7 Analog Stereo Audio Inputs (1 front panel)
   * Media Player MP front panel input
   * 6 Analog Video Inputs, all S-Video and Composite (1 front panel), 3 Component Video
   * 7 Digital Audio Inputs, 3 Coax and 4 Optical (1 front panel)
   * 3 Analog Stereo Audio Outputs, 2 assignable as Tape Out, or as Zone 3 and Zone 4 Outputs with independent source and volume control
   * Back Surround Amplifier Channels can be reassigned for Zone 2 or front Bi-Amp
   * 3 Video Monitor Outputs, Component, S-Video and Composite formats
   * 3 Analog Video Outputs, 2 Tape (Composite and S-Video) and 1 Zone (Composite)
   * 2 Digital Outputs, 1 Coaxial, 1 TOSLINK
   * 7.1 Analog Input (for DVD Audio/SACD/ETC.)
   * Speaker A + B switching (Speakers B stereo only)
   * Zone 2 A/V Line Level Output with independent source and volume selection
   * ZR-4 Second Zone Remote included with discrete codes for independent zone
   * IR Input
   * 3 x IR Outputs
   * RS-232 port interface for advanced control systems
   * 3 x 12V Output Triggers, 1 x 12V input
   * Preamp Outputs for all 7.2 channels (2 Subwoofers)
   * RDS FM/AM Tuner with 30 direct access presets
   * XM Ready – XM subscription and optional XM module required
   * HTR-3 Illuminated Learning Remote Control

Used By

tkmedia