Panasonic BL-C10
From LinuxMCE
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Works | 3rd Jan 2011 | purps |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Contents |
Features
- Stylish & compact
- Human Detection Sensor
- If it detects someone, it notifies you by e-mail!
- Color Night View mode
- View images even in low light
- Privacy mode
- Privacy mode ensures your privacy.
- Setup is easy with UPnP
- Even a beginner can setup the camera thanks to UPnP support!
- Camera control
- Even when away from home, you can change the direction of the camera lens!
- Pan/Tilt
- Viewing the camera via mobile phone
- Other features
- Multi-camera feature
- Image buffer feature
- Viewnetcam.com service
- Built-in web server
The configuration page : http://<camera_ip>/CgiStart
Installation
This camera can either be installed as a Motion device (but Pan/Tilt/Zoom will not work, there are various mentions of this on the forums) or it can be installed as a simple viewer with Pan/Tilt/Zoom controls (this is PnP).
I did both; once under motion (for recording motion), and then as a viewer (for the Scenarios). This may not be the best way of doing things, but it worked for me.
Note: If to begin with the camera is not detected, perform a factory reset; this is achieved by holding the reset button down for a few seconds. Especially important if you bought the camera second hand.
