Edimax IC1510

Version	Status	Date Updated	Updated By
710	Unknown	N/A	N/A
810	Unknown	N/A	N/A
1004	Unknown	N/A	N/A
1204	Unknown	N/A	N/A
1404	Unknown	N/A	N/A
Usage Information

Status

The Edimax IC1510 works with video.

Features

• Browser based
• 10/100mbit LAN
• 30fps max
• Supports high speed hardware-based Motion-JPEG compression
• Supports video resoultion:640x480(VGA),320x240(CIF) and 160x120(QCIF)
• UPnP, DynDNS
• Real-Time Live Video
• Supports Auto Brightness / Contrast / Hue Control
• Built-in manual focus lens

Edimax Ip Camera and Motion Wrapper

IP cameras can be used under the Motion Wrapper to enable it to detect motion and alert based on that function.

To add Motion Wrapper and Edimax Ip Cameras

NOTE: I still need to test the alerts.

• Open your webadmin control panel and on the left pane at the bottom click on "Show Device Tree".

• In the left pane Click on "core/hybrid".

• On the right pane near the top, click on "Create Child Device", then leave everything blank and click "Pick Device Template" button.

• Click the pull down box under "Device Template" and find the template labeled "Motion Wrapper", select this item and click "Pick Device Template"

• Now on the right pane, click "Create Child Device" again. Enter your IP Cameras IP address and MAC address here, the MAC address is located on a sticker on the back of the camera, then click "Pick Device Template"

• Click the pull down box under "Device Template" and use "Generic Motion IP Camera", then click "Pick Device Template"

• Now on the right window pane, under Device Info fill in the following

PATH: /mjpg/video.mjpg
TCP PORT: 80
USERNAME: <username you assigned>
PASSWORD: <password you assigned>

• Now click save at the bottom, reload your router, and on your mce interface go to "Security" -> "Generic Motion IP Camera" to see if it's working.
• I had to reboot my server to get it working.