1004 Video Hardware Compatibility List
Contents
GPU Compatibility List
The purpose behind this page is to give a compatibility probability list for unsupported chipsets, and to confirm these when possible.
-- All GPU's listed here are considered UNSUPPORTED -- though this matrix seeks to give you solutions we will not automate, but have figured out as workarounds. All GPU's not listed here are currently believed to be supported. If not please notify L3mce preferably in IRC, or at the forum.
Some common information you will want to get and use. Please give this data when creating a ticket or forum post about a card not working/not listed here.
- Begin any of this sort of work as root. All commands in this matrix assume you are root. If you have ssh'ed into your MD, you are already root. If you are on a hybrid then:
sudo -i
- Update PCI IDs
update-pciids
- Detailed card information
lspci -nn | grep -w 'VGA'
- Card PCI ID
lspci -nn | grep -w 'VGA' | sed 's/.*://;s/\].*//'
- Audio cards that ALSA can see
aplay -l
- Look at ALSA config file
cat /etc/asound.conf
- Look at xine config file
tail -4 /etc/pluto/xine.conf
- Check ALSA version
apt-cache policy alsa-base | grep Installed
- Check ALSA backports installation status
apt-cache policy linux-backports-modules-alsa-$(uname -r) | grep Installed
All together, minus rooting:
update-pciids lspci -nn | grep -w 'VGA' lspci -nn | grep -w 'VGA' | sed 's/.*://;s/\].*//' aplay -l cat /etc/asound.conf tail -4 /etc/pluto/xine.conf apt-cache policy alsa-base | grep Installed apt-cache policy linux-backports-modules-alsa-$(uname -r) | grep Installed
Audio: For the terms of this list, "audio" refers to digital audio from the card, typically HDMI audio. For further understanding of how audio currently works, please see the new audio scheme for possible resolution of audio issues without installing things you do not need. If your cards audio device shows up in aplay then nothing more is required to install, only a configuration change is necessary, as detailed in the link.
nVidia
| Series | Model | Video OOTB | Audio OOTB | Resolution |
| GT | 4xx | Yes | No | Upgrade Kernel to Natty Change line 225 of SetupAudioVideo.sh CardDevice from 7 to 9 |
| GTX | 5xx | Sometimes | No | Try first running a Speaker test; setting dParam=3. if this produces sound, then change line 225 of SetupAudioVideo.sh CardDevice from 7 to 3. Try other params listed in link absent success. SHOULD your card not be listed in aplay then: |
| GT | 6xx | Yes | No | Upgrade Kernel to Natty Update ALSA |
Intel
| Series | Model | Video OOTB | Audio OOTB | Resolution |
| Sandy Bridge | All | Yes | Yes | This should be working, out of the box. If something went wrong, then do the following: Upgrade Kernel to Natty |
| Ivy Bridge | All | No | No | Upgrade Kernel to Latest Oneiric Update ALSA |
ATI
| Series | Model | Video OOTB | Audio OOTB | Resolution |
| HD | 57xx and up | No | No | Due to a known bug in repo catalyst utility, aticonfig does not find these cards. Add ATI Catalyst Support |
Should any of the solutions below throw back dpkg errors then:
dpkg --configure -a
A working system should NOT produce any result. If it DOES produce output, then it has tried to fix itself. Try commands again. If there are STILL problems, you need further assistance to stabilize your system.
MythTV
Some of these configurations cause MythTV to not utilize !default correctly... so in the MythTV front-end (NOT backend) setup/general, you may need to specify HDMI or plughw:1,7 from the detected options available in the audio setup. In some rare cases with ATI or Intel you may find it necessary to drop the device number... so turn its auto-detected "plughw:1,7" into "plughw:1". I recommend using a keyboard with a delete key, because in myth, backpsace takes you back a menu.
To get to MythTV general setup, open MythTV, once it finishes tuning a channel, press escape. Don't do it to quick or myth will think it died and try to respawn. This will take you your recorded programs most likely. Press esc. Choose Setup. Choose General. Audio is on the second page as memory serves. Left and right in the Audio field will scroll through the options.
Solutions
All solutions here can be copied/pasted, but assume you are root. Please begin sessions by typing "sudo -i" without quotes and enter your pass when prompted. It is recommended that you reboot after any of these solutions. /usr/pluto/bin/RebootWithAVWizard.sh is probably best for testing after applying solutions.
Add Intel Advanced Support
apt-add-repository ppa:kernel-ppa/ppa apt-add-repository ppa:glasen/intel-driver # For additional performance issues, the following may help # apt-add-repository ppa:f-hackenberger/x220-intel-mesa apt-get update
Add nVidia Current Driver Support
With the 304+ nvidia driver we recommend pulling down alsa .25 at the same time as prescribed here.
/usr/pluto/bin/Stop_X.sh add-apt-repository ppa:ubuntu-x-swat/x-updates apt-get update apt-get install -y nvidia-current
Add ATI Catalyst Support
/usr/pluto/bin/Stop_X.sh wget -P /tmp http://www2.ati.com/drivers/linux/amd-driver-installer-catalyst-12.10-x86.x86_64.zip apt-get install unzip unzip /tmp/amd-driver-installer-catalyst-12.10-x86.x86_64.zip ~/ sh ~/amd-driver-installer-catalyst-12.10-x86.x86_64.run
Then follow the instructions.
Add ALSA Backport .24 Support
apt-get install -yf linux-backports-modules-alsa-$(uname -r)
Add ALSA .24 Support
add-apt-repository ppa:team-iquik/alsa apt-get update apt-get install -y alsa-base apt-get install -y alsa-utils
Speaker Test
NOTE: This command sequence requires the user set the cParam and dParam values
Where cParam=<your card #> and dParam=<your device #>. For the standard discovery need, these will be revealed by:
aplay -l | grep -i hdmi
nVidia GT chipsets reveal device numbers 3, 7, 8, and 9. Almost all of them are device 7. If you see the devices in aplay and you do not have audio, test each until you get signal.
cParam= dParam=
if [[ -n "$cParam" ]] && [[ -n "$dParam" ]]; then . /usr/pluto/bin/Utils.sh; if [[ "$AlternateSC" -ge "1" ]]; then speaker-test -c2 -l1 -t sine -Dplughw:${cParam},${dParam} else speaker-test -c2 -l1 -t sine -Dplughw:${cParam} fi else StatusMessage "You must set the variables for both cParam and dParam. They cannot equal null" fi
Upgrade Kernel to Natty
CurKernel="-generic"
if uname -r | grep "pae"; then CurKernel="-generic-pae"; fi
NewKernel="linux-image${CurKernel}-lts-backport-natty"
NewHeaders="linux-headers${CurKernel}-lts-backport-natty"
apt-get -yf install "$NewKernel"
apt-get -yf install "$NewHeaders"
apt-get update
apt-get -yf dist-upgrade
Upgrade Kernel to Latest Oneiric
CurKernel="-generic"
if uname -r | grep "pae"; then CurKernel="-generic-pae"; fi
NewKernel="linux-image-3.0.0-26${CurKernel}"
NewHeaders="linux-headers-3.0.0-26${CurKernel}"
apt-get -yf install "$NewKernel"
apt-get -yf install "$NewHeaders"
apt-get update
apt-get -yf dist-upgrade
