Pioneer Pro-1140HD

Features

• 50" (diagonal) widescreen Plasma television
• RS232 port at the back to allow external control (by LinuxMCE for example)
• HDMI inputs

For detailed specs see the [| Pioneer 1140HD webpage].

• [| Operations manual]

Serial Port use

The Pioneer Pro-1140HD can be controlled by LinuxMCE through the serial port.

1. From the factory the 1140HD is set to SR+ mode which ignores the rs232 port. In order to take the tv out of SR+ mode so it will respond to rs232 information you must start with the tv in standby mode. On the television remote, press the "Home Menu" key and within 3 seconds press the power on button. You will see SR+ <=> :On at the bottom of the screen. Press the left key on the direction pad of the remote to turn the SR+ <=> to :Off. If you need to change the baud rate, you can press down on the direction pad of the remote. The factory default baud rate is 9600.
2. You will need a "straight" or "pass through" serial cable to connect the tv to the media director or hybrid/core.

Create a New Template in LinuxMCE

Directions for creating the template are discuss in [the forum]. The codes for controlling the 1140hd are found on[this page]. An example of the code you enter to turn on the tv is: <$"\x02**PON\x03"$> An example of the code to change tv input to input 6 (an HDMI port) is: <$"\x02**INPS06\x03"$>