User:GnEeErKd

Core/MD Hybrid

Hardware

(This is a one network card installation) Asus T3-P5945GCX Barebones with 3.00GHz Pentium 4 Nvidia GeForce 6600 256 MB PCI-E 16x Video Card (DVI Output) 2 GB Generic RAM 80 GB Seagate ST380215A Hard Drive (for the OS and temporary media storage) 1 TB Western Digital 10EAVS External Hard drive (for media storage) DVDRAM GSA-4167B

    == Peripherals and Accessories ==
    24 inch Sceptre LCD Monitor (DVI)
    5.1 Channel Creative Sound System
    Gigaware microphone
    Generic USB 5 Button Wireless Optical Mouse with Scroll Wheel
    Generic Wireless PS/2 keyboard
    Ezonics EZCam USB Webcam
    Microsoft NX-6000 Webcam
    Generic 7-port USB Hub
    USB Bluetooth Dongle with CSR chipset
    HP Deskjet 2545 USB Printer
    == Software ==
    LinuxMCE 0810 beta2

X10 Devices

    == Controlling ==
    Controller: CM11A
    Remote: KR22A

    == Controlled ==
    LM465 is dimmable
    AM466 is not dimmable
    RR501 is not dimmable and is a remote control receiver (Can only be unit code 1 or 9)

    Device Code | Module | Description
         B1     | RR501  | Sound System Power
         B2     | LM465  | Floor Light
         B3     | LM465  | Light Tree
         B4     | LM465  | Desk Light
         B5     | AM466  | Monitor Power
         B6     | AM466  | Rope Lights & Strobe Light
         B7     | AM466  | Fan
         B8 ------------------------------------------
         B9     | RR501  | Black Lights

The Installation

    == LMCE 0810 beta2 Installation ==
    #Followed the internet installation instructions located here
    #Upon reboot, I temporarily hooked the monitor to VGA to go through AVWizard
    #Chose DVI output, 1080p, 60 Hz, OpenGL with Alpha Blending, stereo sound, 100% volume, and hit I Agree
    #Upon finishing the AVWizard, there was a grey screen with large text displaying each package that was installed
    #This continued until it got to the Orbiter Regeneration
    #After the orbiter regeneration, I had the infamous grey screen with a cursor
    #I used Alt-F2 to get to get to tty2, and logged in
    #I edited the /etc/network/interfaces file as such:

    /etc/network/interfaces
    auto lo
    iface lo inet loopback
    auto eth0
    iface eth0 inet static
       address 192.168.200.42
       netmask 255.255.255.0
       gateway 192.168.200.1
    auto eth0:1
    iface eth0:1 inet static
       address 192.168.80.1
       netmask 255.255.255.0