User:GnEeErKd/Configuration Files

Configuration Files

/etc/init.d/linuxmce

• I don't know if the specific placement of this line really matters, but this worked for me

StartService "Setting SSH Keys" "/usr/pluto/bin/SSH_Keys.sh" "&"
StartService "Setting Coredump Location" "/usr/pluto/bin/corefile.sh"
StartService "Creating Firewire 2 Video4Linux Pipes" "/usr/pluto/bin/Firewire2Video4Linux.sh"
StartService "Configuring Pluto Storage Devices" "/usr/pluto/bin/StorageDevices_Setup.sh"
/etc/init.d/samba start
StartService "Detecting Timezone" "/usr/pluto/bin/Timezone_Detect.sh" "&"
StartService "Status Radar" "/usr/pluto/bin/StorageDevices_StatusRadar.sh"
StartService "Samba Radar" "/usr/pluto/bin/StorageDevices_SambaRadar.sh"
StartService "PVR-250 tuner restore" "/usr/pluto/bin/CaptureCards_BootConfig_PVR-250.sh"
StartService "KDE Desktop" "/usr/pluto/bin/Start_KDE.sh"
## Setup ALSA mixers
...

/etc/network/interfaces

• (the eth0 configuration should be set according to the network the media center is connected to)

auto lo
iface lo inet loopback
auto eth0d localhost 62 -1000 2 9 25 0" replacing 62 with the device code of the generic sensor you created 
iface eth0 inet static
   address 192.168.200.42
   netmask 255.255.255.0
   gateway 192.168.200.1
auto eth0:1
iface eth0:1 inet static
   address 192.168.80.1
   netmask 255.255.255.0

~/Desktop/Activate-Orbiter.sh

• Change "21" to the device number of your OnScreen orbiter
• This can be found by going to Web Admin > Show Devices Tree > Core > The core/hybrid, click on OnScreen Orbiter and look in the black box at the top left of the information displayed

#!/bin/bash
/usr/pluto/bin/MessageSend localhost 0 21 1 912 119 "0"

~/.kde/Autostart/Set-Volume.sh

#!/bin/sh
amixer sset Master 20% unmute
amixer sset Front 100% unmute
amixer sset Surround 100% unmute
amixer sset Center 100% unmute
amixer sset LFE 100% unmute
amixer sset 'Front Mic Boost' 100% unmute
amixer sset 'Front Mic' 100% unmute
amixer sset 'Input Source' 'Front Mic'
amixer sset 'Capture' 100% unmute

/etc/X11/xorg.conf

• Options may very depending on your setup and mouse, this is the config for my setup
• The protocol ExplorerPS/2 seems to have the best luck, but auto may work as well

...
Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "ExplorerPS/2"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
    Option         "Buttons" "7"
    Option         "ButtonMapping" "1 2 3 6 7"
EndSection
   ...

~/.xbindkeysrc

• b:# is the mouse button, modify according to the functions you want
• use 'xev' to determine the mouse button numbers
• use 'xbindkeys -k' to determine keyboard button codes (they are case-sensitive)

"xte 'keydown F7' &"
  b:2
"xte 'keyup F7' &"
  b:2+release
"xte 'keydown Prior' &"
  b:4
"xte 'keyup Prior' &"
  b:4+release
"xte 'keydown Next' &"
  b:5
"xte 'keyup Next' &"
  b:5+release
"xte 'keydown F6' &"
  b:6
"xte 'keyup F6' &"
  b:6+release
"xte 'keydown F8' &"
  b:7
"xte 'keyup F8' &"
  b:7+release

/etc/ssmtp/ssmtp.conf

• Make sure you replace USERNAME and PASSWORD with your Gmail account info

#
# Config file for sSMTP sendmail
#
# The person who gets all mail for userids < 1000
# Make this empty to disable rewriting.
root=USERNAME@gmail.com
# The place where the mail goes. The actual machine name is required no
# MX records are consulted. Commonly mailhosts are named mail.domain.com
mailhub=smtp.gmail.com:587
UseSTARTTLS=YES
AuthUser=USERNAME
AuthPass=PASSWORD
# Where will the mail seem to come from?
rewriteDomain=gmail.com
# The full hostname
hostname=dcerouter
# Are users allowed to set their own From: address?
# YES - Allow the user to specify their own From: address
# NO - Use the system generated From: address
FromLineOverride=YES

~/Desktop/email.sh

• Replace 5555551234@vtext.com with whatever the equivalent is for your phone carrier, or a normal email address if you don't want text alerts

#!/bin/bash
# script to send simple email
# email subject
SUBJECT="MCE"
# Email To ?
EMAIL="5555551234@vtext.com" # This is the text message email setup for verizon, check for your carrier's equivalent
# Email text/message
EMAILMESSAGE="/tmp/emailmessage.txt"
echo "Your lights are:">$EMAILMESSAGE
echo "Off">>$EMAILMESSAGE
# send an email using /bin/mail
mail -s "$SUBJECT" "$EMAIL" < $EMAILMESSAGE

/etc/udev/rules.d/95-webcam.rules

• Modify the vendor and product ID to match that of your camera

KERNEL=="video*", SYSFS{idVendor}=="045e", SYSFS{idProduct}=="00f8", NAME="video5"

/usr/bin/skype

#!/bin/sh
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype.real

~/.devilspie/skype.ds

• This isn't quite right yet, but works if you have auto-answer on

(if
    (matches (application_name) "^Skype")
    (begin
        (center)
        (above)
        (focus)
        (skip_pager)
        (skip_tasklist)
    )
)