Firewall Rules
From LinuxMCE
Revision as of 09:42, 5 May 2010 by Wierdbeard65 (Talk | contribs)
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Unknown | N/A | N/A |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
This page allows you to customize your firewall rules, even disabling the firewall. When first opened you will notice that there are several predefined rules already in place.
Contents
Options
Protocol
Here is where you can choose the protocol involved with this rule:
Source Ports
Choose the Ports to be used in the rule.
Destination Port
Port to forward requests to.
This option is only available if Port Forwarding is selected in the Rule Type
Destination IP
IP Address of the computer being forwarded to.
This option is only available if Port Forwarding is selected in the Rule Type
Rule Type
There are two types of rules available:
- Core Input
- Port Forward
Limit IP
You can limit rules to specific IP addresses.
