ShuttleX50V2

Version	Status	Date Updated	Updated By
710	Unknown	N/A	N/A
810	Works, not pnp	8th September 2010	BongoWongo
1004	Unknown	N/A	N/A
1204	Unknown	N/A	N/A
1404	Unknown	N/A	N/A
Usage Information

This page is compliant with 0810 Beta | Current status : working, not plug and play

Shuttle X50 V2 [1]

It is a 15,4 inch touchscreen with an atom processor, with builtin camera, microphone and speakers. Ideal for a kitchen situation.

How to get it working.

Diskless Boot

1. Unrecognized nic

The driver for the JMicron JMC250 PCI Express Gigabit Ethernet controller needs to be first installed, before the MD will netboot.

Download the file jme-1.0.5.tbz2 which contains the driver from ftp://jmicron.com.tw/jmc2xx/Linux/

Open a "terminal" and type the following

$ tar xjvf jme-1.0.5.tbz2
$ cd jme-1.0.5
$ make install

copy the module to the running kernel

$ cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/

To get a NIC to work, you have to modify a file, type the following in "terminal"

$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules

and add a single line for your NICs kernel module. In the above case the name of the module is

jme

After adding the above line (and saving the change of course), you have to recreate the initial ramdisk.

/usr/pluto/bin/Diskless_BuildDefaultImage.sh

or maybe

mkinitramfs -d /etc/initramfs-tools-interactor/ -o /tftpboot/default/initrd

is enough.

This will create a new initial ramdisk for the first boot of new MDs containing the jme module. Now, the first boot of the diskless MD will succeed and a new diskless media director will be created.

1. 1. ACPI

Turn it off

Touchscreen

Used a keyboard to go through all of the wizards, went into KDE Desktop, installed latest galexy drivers. Touchscreen works, but has the tendency to double tap. Ignore first event, does not work.

This page is a work in progress