Linksys rtp300
From LinuxMCE
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Working with issues | 4th February 2011 | Willow3 |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Contents |
Summary
The Linksys RTP300 is a 4-port Ethernet router with two built in phone-lines. Each phone line has a corresponding RJ-11 jack on the back of the device where you can connect any regular analogue phone.
The RTP300 is often provided to customers by SIP providers as a cheap HW solution to get started quickly with whatever phone you already have at home. If you are registered with a SIP provider chances are that you already have one at home.
This device supports all common protocols, but this page describes how to use it as a SIP device. It is not PnP in LinuxMCE, but with some simple manual steps it can easily be integrated in your LinuxMCE system. This page describes how.
