Acer X1200

From LinuxMCE
Revision as of 13:07, 24 April 2011 by Heinola (Talk | contribs) (Acer Aspire Slime X1200 Desktop)

Jump to: navigation, search

Example.jpg


Acer Aspire Slime X1200 Desktop

File:Http://support.acer.com/acerpanam/desktop/0000/Acer/AspireX1200/images/nv/ASX1200 NV.png


Processor AMD LIVE!: Athlon X2 dual-core processor

Memory Up to 4 GB of DDR2 667/800 MHz SDRAM (dual-channel support on two DIMMs)

BIOS Award PnP BIOS compatible with SMBIOS 2.4

System Chipset NVIDIA® GeForce® 8200

I/O Controller Hub NVIDIA NForce MCP78 692

Expansion Slots PCI Express® 2.0 x16 slot / PCI Express® 2.0 x1 slot

Audio Embedded high-definition audio Video NVIDIA® GeForce® 8200 graphics solution

Storage Serial ATA hard disk up to 1 TB / SuperMulti or DVD-ROM optical drive

Card Reader Multi-in-one card reader, supporting: CompactFlash® (Type I and II), CF+™ Microdrive, MultiMediaCard (MMC), MMCmobile™, Reduced-Size MultiMediaCard (RS-MMC), Secure Digital™ (SD) Card, miniSD™ Card, xD-Picture Card™, Memory Stick®, Memory Stick PRO™, Memory Stick Duo™, Memory Stick PRO Duo™, USB 2.0 and IEEE 1394 ports

Networking Gigabit Ethernet

Front I/O ports Five USB 2.0 ports, Multi-in-one card reader, High-definition headphone and microphone jacks, IEEE 1394 port (4-pin)

Rear I/O ports Four USB 2.0 ports, PS/2 keyboard and mouse ports, Five audio ports, Ethernet (RJ-45) port, D-Sub VGA port, HDMI™ port, eSATA port

Chassis 265 (H) x 315 (D) x 100 (W) mm (without bezel) Power Supply Industry Standard 220 Watt


Used as MD

 I have 2 of these units running as MD's now.  One in my living room and another 

in Bedroom #2.

 The Living room unit ran standard install / setup with out any issues other than

no HDMI audio. To fix this issue I set the unit up fully as a MD; then I shelled into the Living room MD aka (moon44) ran alsamixer and unmuted everything. Then ran alsactl store.

 This seemed to fix the issue.


 Other than this I have had little or no issues with these units.  Then only thing I would

requimend is 4G ram rather than the 2G I am running. This would speed up the UI2 but both UI1/UI2 plus UI with trans work well.