Sipgate

From LinuxMCE
Revision as of 11:55, 6 January 2007 by Wikiadmin (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
This page was written by Pluto and imported with their permission when LinuxMCE branched off in February, 2007. In general any information should apply to LinuxMCE. However, this page should be edited to reflect changes to LinuxMCE and remove old references to Pluto.
This should be a short How-To for integrating sipgate with Pluto-Asterisk. It describes the steps what i have done and where the problems are.

This Page is under construction!

1. Step Install Pluto Core/Hybrid


2. Step Add a Media Director


After the this i a running Plutosystem with one Media Director and one Windows XP Orbiter.

3. Step Add Phone Lines

In Pluto Web Admin go to Devices -> Phone Lines.

I don't make changes in the first box: 

 When dialing a local number, automatically prepend the area code
Also prepend a digit (1 for US/Canada, 0 for Europe)
Local Number Length

I choose my Provider (sipgate.at) and entered my Datas. 

Type  	Data  	Password  	Username  	Host  	        Phone number
SIP 	sipgate XXXXXXX 	9627932 	sipgate.at 	0720726742

I don't know if i have to change the settings in the first box!?!?!?

4. Step Reload the router

Don't know if the reload is important at this point, but i think it's better to do it.


5. Step AMP Configuration

In Pluto Web Admin go to Advanced -> Configuration -> Phones Setup -> Setup. Pluto has inserted everything to asterisk. But at this point i can't call my sipgate-number. So go to Trunks and choose my trunk Trunk SIP/sipgate. On Sipgate.at i find a configuration file for asterisk, the main difference is that i need allow=alow&alaw&alaw&ulaw&g729&gsm&slinear this in the Incoming and Outgoing Settings. So i added it and it worked! Here are my configurations:

Dial Rules: 

112
411
911
9|.

Outgoing Settings: 

allow=alow&alaw&alaw&ulaw&g729&gsm&slinear
auth=md5
authuser=9627932
callerid=9627932
canreinvite=no
context=from-internal
disallow=all
dtmfmode=inband
fromdomain=sipgate.at
fromuser=9627932
host=sipgate.at
insecure=very
nat=yes
qualify=no
secret=XXXXXX
type=peer
user=9627932
username=9627932

Incoming Settings 

allow=alow&alaw&alaw&ulaw&g729&gsm&slinear
auth=md5
authuser=9627932
callerid=9627932
canreinvite=no
context=from-internal
disallow=all
dtmfmode=inband
fromdomain=sipgate.at
fromuser=9627932
host=sipgate.at
insecure=very
nat=yes
qualify=no
secret=FHwsed
type=user
user=9627932
username=9627932

Problems

I can call my sipgate number from my cell phone but i only here a female voice who tells me that all circuits are busy now. I can See in the report Panel of AMP that someone has called me and the call was answered but i don't get a Message on my orbiters. I even can't talk from one Orbiter (MD) to another (Hybrid).

Here is the log file from asterisk when i make a call from my cell phone: 

Connected to Asterisk 1.2.9.1-BRIstuffed-0.3.0-PRE-1q currently running on dcero                                                                             uter (pid = 16397)
Verbosity is at least 3
Core debug is at least 1
    -- Executing Macro("SIP/9627932-96e1", "dialout-trunk|2|627932|") in new stack
    -- Executing GotoIf("SIP/9627932-96e1", "1?3:2)") in new stack
    -- Goto (macro-dialout-trunk,s,3)
    -- Executing Macro("SIP/9627932-96e1", "user-callerid") in new stack
    -- Executing DBget("SIP/9627932-96e1", "AMPUSER=DEVICE/9627932/user") in new stack
    -- DBget: varname=AMPUSER, family=DEVICE, key=9627932/user
    -- DBget: Value not found in database.
    -- Executing DBget("SIP/9627932-96e1", "AMPUSERCIDNAME=AMPUSER//cidname") in new stack
    -- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=/cidname
    -- DBget: Value not found in database.
    -- Executing GotoIf("SIP/9627932-96e1", "1?5") in new stack
    -- Goto (macro-user-callerid,s,5)
    -- Executing NoOp("SIP/9627932-96e1", "Using CallerID "069915324714" <9627932>") in new stack
    -- Executing Macro("SIP/9627932-96e1", "record-enable|9627932|OUT") in new stack
    -- Executing GotoIf("SIP/9627932-96e1", "0 > 0?2:4") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing AGI("SIP/9627932-96e1", "recordingcheck|20070106-123650|asterisk-16397-1168083410.0") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20070106-123650|asterisk-16397-1168083410.0: Outbound recording not enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing NoOp("SIP/9627932-96e1", "No recording needed") in new stack
    -- Executing Macro("SIP/9627932-96e1", "outbound-callerid|2") in new stack
    -- Executing GotoIf("SIP/9627932-96e1", "1?3") in new stack
    -- Goto (macro-outbound-callerid,s,3)
    -- Executing DBget("SIP/9627932-96e1", "USEROUTCID=AMPUSER/9627932/outboundcid") in new stack
    -- DBget: varname=USEROUTCID, family=AMPUSER, key=9627932/outboundcid
    -- DBget: Value not found in database.
    -- Executing GotoIf("SIP/9627932-96e1", "1?6") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing NoOp("SIP/9627932-96e1", "CallerID set to "069915324714" <9627932>") in new stack
    -- Executing SetGroup("SIP/9627932-96e1", "OUT_2") in new stack
    -- Executing CheckGroup("SIP/9627932-96e1", "") in new stack
    -- Executing SetVar("SIP/9627932-96e1", "DIAL_NUMBER=627932") in new stack
    -- Executing SetVar("SIP/9627932-96e1", "DIAL_TRUNK=2") in new stack
    -- Executing AGI("SIP/9627932-96e1", "fixlocalprefix") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
    -- AGI Script fixlocalprefix completed, returning 0
    -- Executing SetVar("SIP/9627932-96e1", "OUTNUM=627932") in new stack
    -- Executing Cut("SIP/9627932-96e1", "custom=OUT_2|:|1") in new stack
    -- Executing GotoIf("SIP/9627932-96e1", "0?16") in new stack
    -- Executing Dial("SIP/9627932-96e1", "SIP/sipgate/627932") in new stack
    -- Called sipgate/627932
    -- SIP/sipgate-8e34 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing Goto("SIP/9627932-96e1", "s-CONGESTION|1") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,1)
    -- Executing NoOp("SIP/9627932-96e1", "Dial failed due to CONGESTION") in new stack
    -- Executing Macro("SIP/9627932-96e1", "outisbusy") in new stack
    -- Executing Playback("SIP/9627932-96e1", "allison7/all-circuits-busy-now") in new stack
    -- Playing 'allison7/all-circuits-busy-now' (language 'en')
    -- Executing Playback("SIP/9627932-96e1", "allison7/pls-try-call-later") in new stack
    -- Playing 'allison7/pls-try-call-later' (language 'en')
    -- Executing Macro("SIP/9627932-96e1", "hangupcall") in new stack
    -- Executing ResetCDR("SIP/9627932-96e1", "w") in new stack
    -- Executing NoCDR("SIP/9627932-96e1", "") in new stack
    -- Executing Wait("SIP/9627932-96e1", "5") in new stack
    -- Executing Hangup("SIP/9627932-96e1", "") in new stack
Retrieved from "http://wiki.linuxmce.org/index.php?title=Sipgate&oldid=2830"