Live DVD

From LinuxMCE
Revision as of 06:28, 5 March 2012 by L3mce (Talk | contribs) (→‎lmcemaster.sh)

Jump to: navigation, search

This wiki attempts to explain the live DVD creation techniques used to produce a universally installable 1004 LinuxMCE DVD with lmcemaster.sh

This builds off of a loop mounted DD image which must be created separately. I have linked for reference the original code which creates that base image. The DD process was put together by possy to create very very small images for me to download, because my internet connection trickles through a swizzle straw. That process can be found at the bottom under image.sh. I have removed the parts which crush this into a tiny rzip image.


Directory Structure

You will note the script creates 3 temporary folders.

$ISODIR is the file structure of the DVD itself. This contains the casper/ubiquity bits, the sqashed file system, bootloader and preseed data. The only files placed here should relate to the operations of the DVD itself. [[1]]

On the DVD itself $ISODIR becomes /cdrom/

$WORKDIR is the work in progress, that is to say the file structure that will be installed on the target machine from the dvd. This root directory is where we put things, and manipulate them for the most part instead of the host. There are some catch-22s which require us to manipulate the host image prior to its being copied to this directory.

On the DVD itself $WORKDIR becomes /target/

$DDDIR is the chrooted host directory structure we are building the DVD to install from. This file structure is ALSO the host environment on the DVD which Ubiquity functions over top of, and how we will facilitate live booting. This expects a DD image, which is then loop mounted to a temporary directory for manipulation. As little change as possible should be made to this directory. If you destroy/move things around in here, those changes persist, making it difficult or impossible to create more than one DVD from a single image.

On the DVD $DDDIR becomes /root/


The WORKDIR directory will serve as the host environment on the live DVD over which ubiquity is run. The WORKDIR is also the file system which will be installed on the hard drive, and become /target on the DVD after it is installed to the drive. Post operation can occur via the d-i preseed/late_command in the preseed.cfg file. The DDDIR and WORKDIR look identical on the DVD save the addition of the /target directory on the DDDIR, which contains the mounted WORKDIR. Chroot operations can occur to that /target directory as well.

Generated Files

We create a few files throughout this process. This explains what and why.

interfaces.temp This file sets two nics as dhcp so as to find internet when needed, as when it is needed, it is needed. This file is used twice. The chrooted environment needs internet and presumes there are two nics, and doesn't know which one it is on. The post installer needs internet prior to DCE nic configuration and presumes the same. If there is only one nic avail, this still works, though it is hacky and I do not like it. Exists at /target/etc/network 

 auto lo
 iface lo inet loopback
 
 auto eth0
 iface eth0 inet dhcp
 
 auto eth1
 iface eth1 inet dhcp


isolinux.cfg this is the boot configuration for isolinux. This sets up the menu, and specifies boot options etc as well as layout options and the preseed file. Colors are in hex format, preceded by an alpha level ATRRGGBB where AT=Alpha Transparency RR=Red GG=Green BB=Blue (example FFFC9306). Exists at /cdrom/isolinux/isolinux.cfg 

 default vesamenu.c32
 prompt 0
 timeout 450
 totaltimeout 450
 
 menu width 78
 menu margin 14
 menu rows 6
 menu vshift 2
 menu timeoutrow 11
 menu tabmsgrow 10
 menu background splash.png
 menu title $LIVECDLABEL
 menu color tabms 0 #fffc9306 #fffc9306 std
 menu color timeout 0 #ff000000 #fffc9306 std
 menu color border 0 #ffffffff #ee000000 std
 menu color title 0 #ff00ff00 #ee000000 std
 menu color sel 0 #ffffffff #fffc9306 std
 menu color unsel 0 #ffffffff #ee000000 std
 menu color hotkey 0 #ff00ff00 #ee000000 std
 menu color hotsel 0 #ffffffff #85000000 std
 #####menu color option  forground #ALPHA/R/G/B  background #ALPHA/R/G/B
 #####blue ff98a5e0
 
 label live
   menu label Live - Boot LinuxMCE Live! from DVD
   kernel /casper/vmlinuz
   append preseed/file=/cdrom/preseed.cfg boot=casper initrd=/casper/initrd.gz quiet splash --
 
 label install
   menu label Install LinuxMCE - Start the installer
   kernel /casper/vmlinuz
   append preseed/file=/cdrom/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.gz quiet splash --
 
 label xforcevesa
   menu label xforcevesa - boot Live in safe graphics mode
   kernel /casper/vmlinuz
   append preseed/file=/cdrom/preseed.cfg boot=casper xforcevesa initrd=/casper/initrd.gz quiet splash --
 
 label memtest
   menu label memtest - Run memtest
   kernel /isolinux/memtest
   append -
 
 label hd
   menu label hd - boot the first hard disk
   localboot 0x80
 append -


preseed.cfg There are a LOT of possible options for this menu. I am currently only disabling language packs, performing autoconfig for the dvd host (not the target mind you), and performing the post-install (note, late_command not currently working). Exists at /cdrom/preseed.cfg and at /cdrom/casper/preseed.cfg 

 tasksel tasksel/first multiselect
 d-i pkgsel/install-language-support boolean false
 d-i preseed/early_command string service mysql stop 
 d-i netcfg/choose_interface select auto
 d-i finish-install/reboot_in_progress note
 ubiquity ubiquity/success_command string bash /cdrom/install/postseed.sh


postseed.sh This is the local file which mounts the target appropriately to perform the post install, and launches said post install and the local OnScreenDisplay which alerts the installer what is occurring. This is problematic atm. It exists at /cdrom/install/postseed.sh 

 #!/bin/bash
 mount -o bind /dev /target/dev
 mount -t proc none /target/proc
 mount -t devpts none /target/dev/pts
 mount -t proc sysfs /target/sys
 echo "Performing post-install steps. Please be patient." > /target/tmp/messenger
 export DISPLAY=:0 
 /cdrom/install/messages.sh &
 chroot /target bash /root/new-installer/postinst.sh


messages.sh This makes use of BootMessages.sh, which the gnome on-screen display utility. This method prevents the messages from blinking... however defining and calling these messages is proving elusive atm. I can drop to tty and export DISPLAY=:0 and run the script and it works like a dream. Calling it from the script the preseed calls isn't working atm. exists at /cdrom/install/messages.sh 

 #!/bin/bash
 export DISPLAY=:0
 OSD_Message()
 {
 	gnome-osd-client --full --dbus "<message id='bootmsg' osd_fake_translucent_bg='off' osd_vposition='center' hide_timeout='1000000' osd_halignment='center'>$*</message>"
 }
 echo "Post install running. Please be patient" > /tmp/messenger
 msgchk=/tmp/msgchk
 newmsg=/tmp/messenger
 if [ ! -f $msgchk ]; then 
    touch -r $msgchk 
 fi
 
 while true; do
    if [ $newmsg -nt $msgchk ]; then
       OSD_Message "$(cat $newmsg)"
       touch -r $newmsg $msgchk
       sleep 1
    fi
 
    if [ "$(cat $newmsg)" == "Reboot" ]; then
       OSD_Message ""
       break
    fi
 done


postinst.sh is the post installer. This is designed to be run from the preseed post, which chroots into the /target directory and performs the post install before rebooting. It is currently being run on reboot, which will itself need to be rebooted when finished. Should it be run chrooted, the mysqld commands must be unhashed for version control. Most functions called here are from #dvd-installer.sh. Exists at /target/root/new-installer/postinst.sh 

 #!/bin/bash
 . /usr/pluto/bin/GeneralFunctions.sh
 . /root/new-installer/dvd-installer.sh
 export LC_ALL=C
 echo "Please be patient while post-installer finalizes new install" > /tmp/messenger
 service mysql stop
 sleep 3
 mysqld --skip-networking&
 cp /etc/network/interfaces.temp /etc/network/interfaces
 
 #Execute Functions ---these functions exist mostly in /target/root/new-installer/dvd-installer.sh 
 pinger
 gpgUpdate
 TimeUpdate
 Pre-InstallNeededPackages
 CreatePackagesFiles
 PreSeed_Prefs
 Fix_Initrd_Vmlinux
 Nic_Config
 Setup_Pluto_Conf
 Setup_NIS
 Create_And_Config_Devices
 Configure_Network_Options
 UpdateUpgrade
 VideoDriverSetup
 addAdditionalTTYStart
 TempEMIFix
 CreateFirstBoot
 InitialBootPrep
 echo "/bin/false" > /etc/X11/default-display-manager
 # In general I don't think chattr is a great idea... but this will prevent it from EVER being overwritten again without chattr -i first.
 chattr +i /etc/X11/default-display-manager
 mv /root/new-installer/lmcemaster/runners/* /etc/init.d
 update-alternatives --install /lib/plymouth/themes/default.plymouth default.plymouth /lib/plymouth/themes/LinuxMCE/LinuxMCE.plymouth 900
 update-initramfs -u
 umount -lf /dev/pts
 umount -lf /sys
 umount -lf /proc
 service mysql stop
 killall -9 mysqld_safe
 kill \`lsof |grep mysqld|cut -d" " -f3|sort -u\`
 umount -lf /dev
 echo "Rebooting" > /target/tmp/messenger
 sleep 3
 #rm /target/tmp/messenger
 reboot


README.diskdefines Defines the architecture, diskname etc. Exists at /cdrom/README.diskdefines and /cdrom/casper/README.diskdefines 

 #define DISKNAME  $LIVECDLABEL
 #define TYPE  binary
 #define TYPEbinary  1
 #define ARCH  $ARCH
 #define ARCH$ARCH  1
 #define DISKNUM  1
 #define DISKNUM1  1
 #define TOTALNUM  0
 #define TOTALNUM0  1

_________________________________________________________________________________________________________________


Moved upstart jobs

I am also moving and rewriting the following files for various reasons/conflicts from /etc/init.d, and using the opportunity to run a couple of commands on boot. I will probably add more to this list as the enormous list of things running for LMCE slow down the operation of the DVD. These files are moved to /root/new-installer/lmcemaster/runners

nis - ypbind server fails and takes forever to do so. Painful.

0start_avwizard - we need to do some work before we try that.

linuxmce - absent avwizard, linuxmce will attempt to run.

The Move

The move is the process of creating the required subdirectories in the WORKDIR, and copying over most of the DDDIR. The majority of the move is done with rsync in the /etc folder. cp is used for the home directory to capture hidden files. Then install specific files are removed. During this time, the initrd.gz, vmlinuz, vesamenu32, and isolinux.bin files are created or moved. The plymouth theme is also created at this and the initramfs is generated, and the process is then repeated and updated with the -u option as the shutdown screen from the original was persisting after the make.

The Squash

Both the WORKDIR and the DDDIR file systems are squashed. The file system, again, is the base of the target image. The working DDDIR file system is the FS the DVD is running, and that which casper takes its cues from as to how to implement the backend to the WORKDIR target. Ubiquity is the front end with the KDE installer which installs the root system for kubuntu, using the casper ghosting. Again... key pieces that you want on the target that are specific to our system should go in the work directory.


Main Scripts

lmcemaster.sh

 #!/bin/bash
 ##################################################################
 # This script creates an installable DVD iso from a base dd
 # image file, specified as IMAGEFILE below. This currently 
 # presumes that the video-wizard-videos package is in the same 
 # directory, as well as the script dvd-installer.sh. 
 # GeneralFunctions.sh and firstboot are expected as well, either  
 # already in /usr/pluto/bin or the user directory
 # This script is free under GNU2 license.
 ##################################################################
 
 set -e
   
 DDDIR=`mktemp -d 1004-dd.XXXXXXXXXX`
 WORKDIR=`mktemp -d 1004-wrk.XXXXXXXXXX`
 ISODIR=`mktemp -d 1004-iso.XXXXXXXXXX`
 NEWINST="/root/new-installer"
 MASTERDIR="$NEWINST/lmcemaster"
 DDMASTER="$DDDIR$MASTERDIR"
 WORKMASTER="$WORKDIR$MASTERDIR"
 CUSTOMISO="LMCE-1004-beta.iso"
 LIVECDLABEL="LinuxMCE 10.04 Live CD"
 CDBOOTTYPE="ISOLINUX"
 LIVECDURL="http://www.linuxmce.org"
 IMAGEFILE=1004
 VERSION=10
 ARCH=i386
 
 ### Mount the image and create some required directories in the temporary folders
 mount -o loop $IMAGEFILE $DDDIR
 mount none -t proc $DDDIR/proc
 mount none -t devpts $DDDIR/dev/pts
 mount none -t sysfs $DDDIR/sys
 mkdir -p $ISODIR/{casper,isolinux,install,.disk}
 mkdir -p $DDDIR/usr/sbin
 mkdir -p $WORKMASTER/runners
 
 trap futureTrap EXIT
 futureTrap () {
    mounted=$(mount | grep 1004-dd | grep none | awk '{print $3}')
    for mounts in $mounted; do umount -lf $mounts; done
    umount -lf `mount | grep 1004-dd | grep loop | awk '{print $3}'`
    sleep 1
    rm -r $DDDIR
    rm -r $WORKDIR
    rm -r $ISODIR   
    if [ -e $WORKMASTER/runners/0start_avwizard ]; then mv $WORKMASTER/runners/* $WORKDIR/etc/init.d; fi
 #   if [ -e $DDMASTER/runners/0start_avwizard ]; then mv $DDMASTER/runners/* $WORKDIR/etc/init.d; fi
 }
 
 ### TODO attach general functions to Utils.sh or equiv, or add GeneralFucntions.sh to pluto/bin scripts. 
 cp GeneralFunctions.sh $DDDIR/usr/pluto/bin
 ### TODO creating and destroying this file seems like a bad idea, so I am moving it to /usr/pluto/bin
 cp firstboot $DDDIR/usr/pluto/bin
 . $DDDIR/usr/pluto/bin/GeneralFunctions.sh
 confirmRoot
    NotifyMessage "LinuxMCE will now be mastered to an iso image."
 
    echo "Creating scripts"
    
    #### Set temporary network file
    # TODO There has to be a less hacky way to do this. Delay while one or the other timeout is unnecessarily long
    # Please note that this file is used during the install process of the dvd so should not be removed even if your
    # chroot environment does not require it... which it shouldn't.
 cat <<EOL > $DDDIR/etc/network/interfaces.temp
 auto lo
 iface lo inet loopback
 
 auto eth0
 iface eth0 inet dhcp
 
 auto eth1
 iface eth1 inet dhcp
 EOL
 cp $DDDIR/etc/network/interfaces.temp $DDDIR/etc/network/interfaces
 
 # Create the dvd boot config menu   
    cat <<EOL >$ISODIR/isolinux/isolinux.cfg
 default vesamenu.c32
 prompt 0
 timeout 450
 totaltimeout 450
 
 menu width 78
 menu margin 14
 menu rows 6
 menu vshift 2
 menu timeoutrow 11
 menu tabmsgrow 10
 menu background splash.png
 menu title $LIVECDLABEL
 menu color tabms 0 #fffc9306 #fffc9306 std
 menu color timeout 0 #ff000000 #fffc9306 std
 menu color border 0 #ffffffff #ee000000 std
 menu color title 0 #ff00ff00 #ee000000 std
 menu color sel 0 #ffffffff #fffc9306 std
 menu color unsel 0 #ffffffff #ee000000 std
 menu color hotkey 0 #ff00ff00 #ee000000 std
 menu color hotsel 0 #ffffffff #85000000 std
 #####menu color option  forground #ALPHA/R/G/B  background #ALPHA/R/G/B
 #####blue ff98a5e0
 
 label live
   menu label Live - Boot LinuxMCE Live! from DVD
   kernel /casper/vmlinuz
   append preseed/file=/cdrom/preseed.cfg boot=casper initrd=/casper/initrd.gz quiet splash --
 
 label install
   menu label Install LinuxMCE - Start the installer
   kernel /casper/vmlinuz
   append preseed/file=/cdrom/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.gz quiet splash --
 
 label xforcevesa
   menu label xforcevesa - boot Live in safe graphics mode
   kernel /casper/vmlinuz
   append preseed/file=/cdrom/preseed.cfg boot=casper xforcevesa initrd=/casper/initrd.gz quiet splash --
 
 label memtest
   menu label memtest - Run memtest
   kernel /isolinux/memtest
   append -
 
 label hd
   menu label hd - boot the first hard disk
   localboot 0x80
 append -
 EOL
  
   
    # Make preseed file
 cat <<EOL > $ISODIR/preseed.cfg
 tasksel tasksel/first multiselect
 d-i pkgsel/install-language-support boolean false
 d-i preseed/early_command string service mysql stop 
 d-i netcfg/choose_interface select auto
 d-i finish-install/reboot_in_progress note
 ubiquity ubiquity/success_command string bash /cdrom/install/postseed.sh 
 EOL
 cp $ISODIR/preseed.cfg $ISODIR/casper
 
 
 cat <<EOL > $ISODIR/install/postseed.sh
 #!/bin/bash
 mount -o bind /dev /target/dev
 mount -t proc none /target/proc
 mount -t devpts none /target/dev/pts
 mount -t proc sysfs /target/sys
 echo "Performing post-install steps. Please be patient." > /target/tmp/messenger
 su - ubuntu -c /cdrom/install/messages.sh &
 chroot /target /root/new-installer/postinst.sh
 EOL
 
 
 ### Make On Screen Display
 cat <<EOL > $ISODIR/install/messages.sh
 #!/bin/bash
 export DISPLAY=:0
 msgchk=/target/tmp/msgchk
 newmsg=/target/tmp/messenger
 if [ ! -f \$msgchk ]; then touch -r \$msgchk; fi
 while true; do if [ \$newmsg -nt \$msgchk ]; then /target/usr/pluto/bin/BootMessage.sh "\`cat \$newmsg\`"; touch -r \$newmsg \$msgchk; fi; done
 EOL
 
 
 ### The main post-installer
 cat <<EOL > $WORKDIR/root/new-installer/postinst.sh
 #!/bin/bash
 . /usr/pluto/bin/GeneralFunctions.sh
 . /root/new-installer/dvd-installer.sh
 export LC_ALL=C
 echo "Please be patient while post-installer finalizes new install" > /tmp/messenger
 service mysql stop
 sleep 3
 mysqld --skip-networking&
 cp /etc/network/interfaces.temp /etc/network/interfaces
 #Execute Functions
 pinger
 gpgUpdate
 TimeUpdate
 Pre-InstallNeededPackages
 CreatePackagesFiles
 PreSeed_Prefs
 Fix_Initrd_Vmlinux
 Nic_Config
 Setup_Pluto_Conf
 Setup_NIS
 Create_And_Config_Devices
 Configure_Network_Options
 UpdateUpgrade
 VideoDriverSetup
 addAdditionalTTYStart
 TempEMIFix
 CreateFirstBoot
 InitialBootPrep
 echo "/bin/false" > /etc/X11/default-display-manager
 # In general I don't think chattr is a great idea... but this will prevent it from EVER being overwritten again without chattr -i first.
 chattr +i /etc/X11/default-display-manager
 mv /root/new-installer/lmcemaster/runners/* /etc/init.d
 update-alternatives --install /lib/plymouth/themes/default.plymouth default.plymouth /lib/plymouth/themes/LinuxMCE/LinuxMCE.plymouth 900
 update-initramfs -u
 umount -lf /dev/pts
 umount -lf /sys
 umount -lf /proc
 service mysql stop
 killall -9 mysqld_safe
 kill \`lsof |grep mysqld|cut -d" " -f3|sort -u\`
 umount -lf /dev
 echo "Rebooting" > /target/tmp/messenger
 sleep 3
 #rm /target/tmp/messenger
 reboot
 EOL
 
 
 #####################################
 # Prepping chroot image
 #####################################
    # TODO this step will probably not be necessary on your end, but make sure you have enough room on your base image to get/extract/install
    # Should probably be the first package you install if you wish to preserve a smaller disk size.
    echo "Installing video-wizard-videos if necessary"
    cp dvd-installer.sh $WORKDIR/root/new-installer
    if [ ! -d $DDDIR/home/videowiz ]; then
     cp video-wizard-videos_1.1_all.deb $DDDIR/usr/pluto
     chroot $DDDIR dpkg -i /usr/pluto/video-wizard-videos_1.1_all.deb
     rm $DDDIR/usr/pluto/video-wizard-videos_1.1_all.deb
    fi
    
    StatusMessage "Downloading tools to the HOST needed for mastering."
    apt-get install -y squashfs-tools syslinux squashfs-tools genisoimage sbm ubuntu-standard casper lupin-casper discover1 laptop-detect os-prober linux-generic grub2 plymouth-x11 ubiquity-frontend-kde libvte-common libvte9 python-glade2 python-vtk
    
    StatusMessage "Configuring temporary chrooted network. Please be patient."
    mkdir -p $DDDIR/etc/udev/rules.d
    cp /etc/udev/rules.d/70-persistent-net.rules $DDDIR/etc/udev/rules.d/
    LC_ALL=C chroot $DDDIR /etc/init.d/networking restart
    LC_ALL=C chroot $DDDIR apt-get update
    
    StatusMessage "Downloading necessary tools for re-mastering in chroot..."
    # TODO remove these packages on dvd post-install. No reason for them to exist
    # Make dummy file for pluto-dcerouter to modify
    if [ ! -e $DDDIR/sbin/losetup ]; then echo > $DDDIR/sbin/losetup; fi
    if [ ! -e $DDDIR/sbin/udevtrigger ]; then echo > $DDDIR/sbin/udevtrigger; fi
    LC_ALL=C chroot $DDDIR apt-get -y -q install casper cryptsetup debconf-utils dialog dmraid ecryptfs-utils gnome-osd libdebconfclient0 libdebian-installer4 libdmraid1.0.0.rc16 libecryptfs0 localechooser-data memtest86+ python-pyicu rdate reiserfsprogs squashfs-tools ubiquity ubiquity-casper ubiquity-ubuntu-artwork ubiquity-frontend-kde user-setup xresprobe xserver-xorg-video-nouveau pluto-proxy-orbiter pluto-asterisk libestools1.2 libmp3lame0 lmce-plymouth-theme --allow-unauthenticated
    
    StatusMessage "Upgrading chroot"
    # Upgrade only necessary if a build has happened since scratch creation.
    # Chances are will want mysql up... which I have experienced nothing but failure with
 
    #LC_ALL=C chroot $DDDIR apt-get -y upgrade --force-yes
    
    # Popularity contest conflicts with ubiquity installer, so we remove if installed.
    # TODO this should not be necessary anymore as we are not loading ubuntu-standard anymore. Just for safety and clean.
    LC_ALL=C chroot $DDDIR apt-get remove -yq popularity-contest
    LC_ALL=C chroot $DDDIR apt-get clean
 
 #####################################
 # Prepping the dvd file system
 #####################################
 
    ### This moves things around and creates the file system to be squashed.
    StatusMessage "Time to move. This may take a while. Go code something..."
    
    # Wipe and prevent the installer from changing the apt sources.list
    if [ ! -f "$DDDIR/usr/share/ubiquity/apt-setup.saved" ]; then
     cp $DDDIR/usr/share/ubiquity/apt-setup $DDDIR/usr/share/ubiquity/apt-setup.saved
    fi
 
    # move images for ubiquity background
    cp $DDDIR/lib/plymouth/themes/LinuxMCE/LinuxMCE-logo.png $DDDIR/usr/share/kde4/apps/kdm/themes/ethais/wallpapers/background-1920x1200.png
    cp $DDDIR/lib/plymouth/themes/LinuxMCE/LinuxMCE-logo.png $DDDIR/usr/share/kde4/apps/kdm/themes/ethais/wallpapers/background-1920x1200.png
 
    # Creates the CD tree in the work directory
    mkdir -p $WORKDIR/{home,dev,etc,proc,tmp,sys,var}
    mkdir -p $WORKDIR/mnt/dev
    mkdir -p $WORKDIR/media/cdrom
    chmod ug+rwx,o+rwt $WORKDIR/tmp
    
    # Copying /var and /etc to temp area and excluding extra files
    if [ "$EXCLUDES" != "" ]; then
     for addvar in $EXCLUDES ; do
      VAREXCLUDES="$VAREXCLUDES --exclude='$addvar' "
     done
    fi
    
    # We have no users, but still make sure skel is owned by root
    LC_ALL=C chroot $DDDIR chown root /etc/skel
 
    # This moves everthing but what is excluded
    rsync --exclude='*.log' --exclude='*.log.*' --exclude='*.pid' --exclude='*.[0-9].gz' --exclude='*.deb' --exclude='*.bak'  $VAREXCLUDES-a $DDDIR/var/. $WORKDIR/var/.
    rsync $VAREXCLUDES-a $DDDIR/etc/. $WORKDIR/etc/.
    
    # This removes everything we want to make fresh
    rm -rf $WORKDIR/etc/X11/xorg.conf*
    rm -rf $WORKDIR/etc/timezone
    rm -rf $WORKDIR/etc/mtab
    rm -rf $WORKDIR/etc/fstab
    rm -rf $WORKDIR/etc/udev/rules.d/70-persistent*
    rm -rf $WORKDIR/etc/cups/ssl/server.crt
    rm -rf $WORKDIR/etc/cups/ssl/server.key
    rm -rf $WORKDIR/etc/ssh/ssh_host_rsa_key
    rm -rf $WORKDIR/etc/ssh/ssh_host_dsa_key.pub
    rm -rf $WORKDIR/etc/ssh/ssh_host_dsa_key
    rm -rf $WORKDIR/etc/ssh/ssh_host_rsa_key.pub
    rm -rf $WORKDIR/etc/gdm/gdm.conf-custom
    rm -rf $WORKDIR/etc/gdm/custom.conf
    ls $WORKDIR/var/lib/apt/lists | grep -v ".gpg" | grep -v "lock" | grep -v "partial" | xargs -i rm $WORKDIR/var/lib/apt/lists/{} ;
    echo "  " > $WORKDIR/etc/gdm/gdm.conf-custom
    rm -rf $WORKDIR/etc/group
    rm -rf $WORKDIR/etc/passwd
    rm -rf $WORKDIR/etc/shadow
    rm -rf $WORKDIR/etc/shadow-
    rm -rf $WORKDIR/etc/gshadow
    rm -rf $WORKDIR/etc/gshadow-
    rm -rf $WORKDIR/etc/wicd/wired-settings.conf
    rm -rf $WORKDIR/etc/wicd/wireless-settings.conf
    rm -rf $WORKDIR/etc/printcap
    touch $WORKDIR/etc/printcap
 
    cp $DDDIR/etc/network/interfaces.temp $WORKDIR/etc/network   
    # We use copy here to move home directory including hidden files.
    cp -r $DDDIR/home/* $WORKDIR/home
    # This removes what we don't want in there.
    find $WORKDIR/var/run $WORKDIR/var/log $WORKDIR/var/mail $WORKDIR/var/spool $WORKDIR/var/lock $WORKDIR/var/backups $WORKDIR/var/tmp $WORKDIR/var/crash -type f -exec rm {} \;
 
    # Makes sure we have relevant logs available in var
    for i in dpkg.log lastlog mail.log syslog auth.log daemon.log faillog lpr.log mail.warn user.log boot debug mail.err messages wtmp bootstrap.log dmesg kern.log mail.info
    do touch $WORKDIR/var/log/${i}; done
    
    # See if any temp users left over
    grep '^[^:]*:[^:]*:[5-9][0-9][0-9]:' $DDDIR/etc/passwd | awk -F ":" '{print "/usr/sbin/userdel -f",$1}'> $WORKDIR/cleantmpusers
    . $WORKDIR/cleantmpusers
    grep '^[^:]*:[^:]*:[0-9]:' $DDDIR/etc/passwd >> $WORKDIR/etc/passwd
    grep '^[^:]*:[^:]*:[0-9][0-9]:' $DDDIR/etc/passwd >> $WORKDIR/etc/passwd
    grep '^[^:]*:[^:]*:[0-9][0-9][0-9]:' $DDDIR/etc/passwd >> $WORKDIR/etc/passwd
    grep '^[^:]*:[^:]*:[3-9][0-9][0-9][0-9][0-9]:' $DDDIR/etc/passwd >> $WORKDIR/etc/passwd
    grep '^[^:]*:[^:]*:[0-9]:' $DDDIR/etc/group >> $WORKDIR/etc/group
    grep '^[^:]*:[^:]*:[0-9][0-9]:' $DDDIR/etc/group >> $WORKDIR/etc/group
    grep '^[^:]*:[^:]*:[0-9][0-9][0-9]:' $DDDIR/etc/group >> $WORKDIR/etc/group
    grep '^[^:]*:[^:]*:[3-9][0-9][0-9][0-9][0-9]:' $DDDIR/etc/group >> $WORKDIR/etc/group
    grep '^[^:]*:[^:]*:[5-9][0-9][0-9]:' $DDDIR/etc/passwd | awk -F ":" '{print $1}'> $WORKDIR/tmpusers1
    grep '^[^:]*:[^:]*:[1-9][0-9][0-9][0-9]:' $DDDIR/etc/passwd | awk -F ":" '{print $1}'> $WORKDIR/tmpusers2
    grep '^[^:]*:[^:]*:[1-2][0-9][0-9][0-9][0-9]:' $DDDIR/etc/passwd | awk -F ":" '{print $1}'> $WORKDIR/tmpusers3
    
    cat $WORKDIR/tmpusers1 $WORKDIR/tmpusers2 $WORKDIR/tmpusers3 > $WORKDIR/tmpusers
    cat $WORKDIR/tmpusers | while read LINE ; do
     echo $LINE | xargs -i sed -e 's/,{}//g' $WORKDIR/etc/group > $WORKDIR/etc/group.new1
     echo $LINE | xargs -i sed -e 's/{},//g' $WORKDIR/etc/group.new1 > $WORKDIR/etc/group.new2
     echo $LINE | xargs -i sed -e 's/{}//g' $WORKDIR/etc/group.new2 > $WORKDIR/etc/group
     rm -rf $WORKDIR/etc/group.new1 $WORKDIR/etc/group.new2
    done
    
    # Make sure the adduser and autologin functions of casper as set according to the mode
    [ ! -d $WORKDIR/home ] && mkdir $WORKDIR/home && chmod 755 $DDDIR/usr/share/initramfs-tools/scripts/casper-bottom/*adduser $DDDIR/usr/share/initramfs-tools/scripts/casper-bottom/*autologin
    
    # BOOT Type is isolinux
    cp $DDDIR/boot/memtest86+.bin $ISODIR/isolinux/memtest
    
    # Check and see if they have a custom isolinux already setup.
    find $DDDIR/usr -name 'isolinux.bin' -exec cp {} $ISODIR/isolinux/ \;
    find $DDDIR/usr -name 'vesamenu.c32' -exec cp {} $ISODIR/isolinux/ \;
    
    # Setup isolinux for the livecd
    if [ -e $DDMASTER/splash.png ]; then cp $DDMASTER/splash.png $ISODIR/isolinux; fi
    if [ -e splash.png ]; then cp splash.png $ISODIR/isolinux; fi
    
    # We need a defines file and copy it to the casper dir
 cat <<EOL > $ISODIR/README.diskdefines
 #define DISKNAME  $LIVECDLABEL
 #define TYPE  binary
 #define TYPEbinary  1
 #define ARCH  $ARCH
 #define ARCH$ARCH  1
 #define DISKNUM  1
 #define DISKNUM1  1
 #define TOTALNUM  0
 #define TOTALNUM0  1
 EOL
    cp $ISODIR/README.diskdefines $ISODIR/casper/README.diskdefines
    
    # Make the filesystem.manifest and filesystem.manifest-desktop
    StatusMessage "Creating filesystem.manifest and filesystem.manifest-desktop"
    dpkg-query -W --showformat='${Package} ${Version}\n' > $ISODIR/casper/filesystem.manifest
    cp $ISODIR/casper/filesystem.manifest $ISODIR/casper/filesystem.manifest-desktop
    sleep 1
    
    cp $DDDIR/etc/casper.conf $WORKDIR/etc/
    sleep 1
    
    # Copy the install icon to the live install users desktop
    udtop=$(find $DDDIR/usr -name 'ubiquity*.desktop')
    cp $udtop $DDDIR/etc/skel/Desktop
    
    
    echo "Setting up casper and ubiquity options."
    rm -f $DDDIR/usr/share/ubiquity/apt-setup
    echo "#do nothing" > $DDDIR/usr/share/ubiquity/apt-setup
    chmod 755 $DDDIR/usr/share/ubiquity/apt-setup
 
 #####################################
 # Rebuild initram and squash
 #####################################
    # make a new initial ramdisk including the casper scripts and LinuxMCE plymouth theme
    KERN=$(ls $DDDIR/lib/modules --sort time|head -1)
    ###TODO Remove the move
    LC_ALL=C chroot $DDDIR update-alternatives --install /lib/plymouth/themes/default.plymouth default.plymouth /lib/plymouth/themes/LinuxMCE/LinuxMCE.plymouth 900
    LC_ALL=C chroot $DDDIR mkinitramfs -o /boot/initrd.img-$KERN $KERN
    LC_ALL=C chroot $DDDIR update-alternatives --install /lib/plymouth/themes/default.plymouth default.plymouth /lib/plymouth/themes/LinuxMCE/LinuxMCE.plymouth 900
    LC_ALL=C chroot $DDDIR update-initramfs -u
    
    echo "Copying your kernel and initrd for the livecd"
    # TODO change initrd
    cp $DDDIR/boot/vmlinuz-$KERN $ISODIR/casper/vmlinuz
    cp $DDDIR/boot/initrd.img-$KERN $ISODIR/casper/initrd.gz
 
 ###############################################
 # This moves and rewrites some startup scripts
 ###############################################
    echo "Adjusting startup scripts"
    mv $WORKDIR/etc/init.d/0start_avwizard $WORKMASTER/runners
 
 cat <<EOL > $WORKDIR/etc/init.d/0start_avwizard
 #!/bin/bash
 ### BEGIN INIT INFO 
 # Provides:      avwizard
 # Required-Start:  check_avwizard
 # Required-Stop:   
 # Should-Start:    
 # Default-Start:   2 
 # Default-Stop:    1 
 # Short-Description: AVWizard
 # Description:     This script starts the AV Wizard
 ### END INIT INFO #
 rm /dev/nbd*
 #/root/new-installer/postinst.sh
 exit 0
 EOL
    
    mv $WORKDIR/etc/init.d/nis $WORKMASTER/runners
 cat <<EOL > $WORKDIR/etc/init.d/nis
 #!/bin/sh
 #
 # /etc/init.d/nis     Start NIS (formerly YP) daemons.
 #
 ### BEGIN INIT INFO
 # Provides:       ypbind ypserv ypxfrd yppasswdd
 # Required-Start:     $network $portmap
 # Required-Stop:    $portmap
 # Default-Start:    2 3 4 5
 # Default-Stop:     1
 # Short-Description:  Start NIS client and server daemons.
 # Description:      Start NIS client and server daemons.  NIS is mostly
 #             used to let several machines in a network share the
 #             same account information (eg the password file).
 ### END INIT INFO
 exit 0
 EOL
    
    
    mv $WORKDIR/etc/init.d/linuxmce $WORKMASTER/runners
 cat <<EOL > $WORKDIR/etc/init.d/linuxmce
 #!/bin/bash
 ### BEGIN INIT INFO 
 # Provides:      linuxmce
 # Required-Start:  $remote_fs $syslog 
 # Required-Stop:   $remote_fs $syslog 
 # Should-Start:    $named 
 # Default-Start:   2 
 # Default-Stop:    1 
 # Short-Description: LinuxMCE 
 # Description:     This script is the entry point to start the LinuxMCE core
 #          It starts a couple of needed services and daemons, loads X (if running with AutoStartMedia)
 #          and executes LMCE_Launch_Manager to start devices and taking care of the rest.
 ### END INIT INFO #
 
 exit 0
 EOL
 
 # Make executables
 chmod +x $ISODIR/install/postseed.sh
 chmod +x $ISODIR/install/messages.sh
 chmod +x $WORKDIR/root/new-installer/postinst.sh
 chmod +x $WORKDIR/etc/init.d/0start_avwizard
 chmod +x $WORKDIR/etc/init.d/nis
 chmod +x $WORKDIR/etc/init.d/linuxmce
 
 #This places the post installer, which calls on dvd-installer.sh
    echo > $WORKDIR/root/.bashrc
 
    # Make filesystem.squashfs
    if [ -f lmcemaster.log ]; then
     rm -f lmcemaster.log
     touch lmcemaster.log
    fi
    
    if [ -f $ISODIR/casper/filesystem.squashfs ]; then
     rm -f $ISODIR/casper/filesystem.squashfs
    fi
 
 
    
    echo "Time to squash"
    SQUASHFSOPTSHIGH="-no-recovery -always-use-fragments"
    NotifyMessage "Adding stage 1 files/folders that the livecd requires."
    
    # Add the blank folders and trimmed down /var to the cd filesystem
    mksquashfs $WORKDIR $ISODIR/casper/filesystem.squashfs -b 1M -no-duplicates $SQUASHFSOPTSHIGH 2>>lmcemaster.log
    sleep 1
    
    NotifyMessage "Adding stage 2 files/folders that the livecd requires."
    mksquashfs $DDDIR $ISODIR/casper/filesystem.squashfs -b 1M -no-duplicates $SQUASHFSOPTSHIGH -e .thumbnails .cache .bash_history Cache boot/grub dev etc home media mnt proc sys tmp var $WORKDIR $EXCLUDES 2>>lmcemaster.log
    sleep 2
    
    #add some stuff the log in case of problems so I can troubleshoot it easier
    echo "------------------------------------------------------" >>lmcemaster.log
    echo "Mount information" >>lmcemaster.log
    mount >>lmcemaster.log
    echo "------------------------------------------------------" >>lmcemaster.log
    echo "Casper Script info" >>lmcemaster.log
    ls -l $DDDIR/usr/share/initramfs-tools/scripts/casper-bottom/ >>lmcemaster.log
    echo "------------------------------------------------------" >>lmcemaster.log
    echo "/etc/casper.conf info" >>lmcemaster.log
    cat $DDDIR/etc/casper.conf >>lmcemaster.log
    echo "------------------------------------------------------" >>lmcemaster.log
    echo "/etc/passwd info" >>lmcemaster.log
    cat $WORKDIR/etc/passwd >>lmcemaster.log
    echo "------------------------------------------------------" >>lmcemaster.log
    echo "/etc/group info" >>lmcemaster.log
    cat $WORKDIR/etc/group >>lmcemaster.log
    echo "------------------------------------------------------" >>lmcemaster.log
    echo "Command-line options = $@" >>lmcemaster.log
    echo "------------------------------------------------------" >>lmcemaster.log
    sleep 1
    
    # Checking the size of the compressed filesystem to ensure it meets the iso9660 spec for a single file
    SQUASHFSSIZE=`ls -s $ISODIR/casper/filesystem.squashfs | awk -F " " '{print $1}'`
    if [ "$SQUASHFSSIZE" -gt "3999999" ]; then
     ErrorMessage "The compressed filesystem is larger than the iso9660 specification allows for a single file. You must try to reduce the amount of data you are backing up and try again."
     echo " Too big for DVD">>lmcemaster.log
     exit 1
    fi
    
    # Add filesystem size for lucid
    echo "Calculating the installed filesystem size for the installer"
    unsquashfs -lls $ISODIR/casper/filesystem.squashfs | grep -v " inodes " | grep -v "unsquashfs:" | awk '{print $3}' | grep -v "," > $DDDIR/tmp/size.tmp
    for i in `cat $DDDIR/tmp/size.tmp`; do a=$(($a+$i)); done
    echo $a > $ISODIR/casper/filesystem.size
 
 
 ###########################################
 # Let's make us an iso
 ###########################################
    # TODO this probably is unnecessary, but I don't know what fluffys guts look like.
    CREATEISO="`which mkisofs`"
    if [ "$CREATEISO" = "" ]; then
     CREATEISO="`which genisoimage`"
    fi
    
    # Check to see if the cd filesystem exists
    if [ ! -f "$ISODIR/casper/filesystem.squashfs" ]; then
     ErrorMessage "The cd filesystem is missing."
     exit 1
    fi
    
    # Checking the size of the compressed filesystem to ensure it meets the iso9660 spec for a single file
    SQUASHFSSIZE=`ls -s $ISODIR/casper/filesystem.squashfs | awk -F " " '{print $1}'`
    if [ "$SQUASHFSSIZE" -gt "3999999" ]; then
     ErrorMessage " The compressed filesystem is larger than the iso9660 specification allows for a single file. You must try to reduce the amount of data you are backing up and try again."
     echo " Too big for DVD.">>lmcemaster.log
     exit 1
    fi
    
    # Make ISO compatible with Ubuntu Startup Disk Creator for those who would like to use it for usb boots
    echo "Making disk compatible with Ubuntu Startup Disk Creator."
    touch $ISODIR/ubuntu
    touch $ISODIR/.disk/base_installable
    echo "full_cd/single" > $ISODIR/.disk/cd_type
    echo $LIVECDLABEL - Release i386 > $ISODIR/.disk/info
    echo $LIVECDURL > $ISODIR/.disk/release_notes_url
    
    # Make md5sum.txt for the files on the livecd - this is used during the checking function of the livecd
    echo "Creating md5sum.txt for the livecd/dvd"
    cd $ISODIR && find . -type f -print0 | xargs -0 md5sum > md5sum.txt
    
    # Remove files that change and cause problems with checking the disk
    sed -e '/isolinux/d' md5sum.txt > md5sum.txt.new
    sed -e '/md5sum/d' md5sum.txt.new > md5sum.txt
    rm -f md5sum.txt.new
    
    sleep 1
    
    # Make the ISO file
    StatusMessage "Creating $CUSTOMISO"
    
    $CREATEISO -r -V "$LIVECDLABEL" -cache-inodes -J -l -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o ../$CUSTOMISO "./" 2>>../lmcemaster.log 1>>../lmcemaster.log
    
    # Create the md5 sum file
    echo "Creating $CUSTOMISO.md5"
    cd ../
    md5sum $CUSTOMISO > $CUSTOMISO.md5
    echo " "
    if [ ! -e $CUSTOMISO ]; then
     ErrorMessage "Something has gone horribly wrong. Iso does not exist. Exiting."
    else
     NotifyMessage "Success!!! `ls -hs $CUSTOMISO` is ready to be burned or tested in a virtual machine."
    fi
 
 # Cleans and unmounts without displaying an error message as the trap should.
 cleanFinish () {
    if [ -e $DDDIR/usr/sbin/invoke-rc.d.orig ]; then
    mv $DDDIR/usr/sbin/invoke-rc.d.orig $DDDIR/usr/sbin/invoke-rc.d.orig; fi
    mounted=$(mount | grep 1004-dd | grep none | awk '{print $3}')
    for mounts in $mounted; do umount -lf $mounts; done
    sleep 1
    umount -lf `mount | grep 1004-dd | grep loop | awk '{print $3}'`
    rm -r $DDDIR
    rm -r $WORKDIR
    rm -r $ISODIR
    exit 0
 }
 
 StatusMessage "Unmounting and exiting cleanly."
 # This will give a clean unmount and not trigger the trap, so the trap can show errors.
 # cleanFinish 
 exit 0

dvd-installer.sh

 #!/bin/bash
 . /usr/pluto/bin/SQL_Ops.sh
 . /usr/pluto/bin/Config_Ops.sh
 . /usr/pluto/bin/GeneralFunctions.sh
 ###########################################################
 ### Setup global variables
 ###########################################################
 log_file=/var/log/LinuxMCE_Setup.log
 DISTRO="$(lsb_release -c -s)"
 COMPOS="beta2"
 DT_MEDIA_DIRECTOR=3
 LOCAL_REPO_BASE=/usr/pluto/deb-cache
 LOCAL_REPO_DIR=./
 DT_CORE=1
 DT_HYBRID=2
 mce_wizard_data_shell=/tmp/mce_wizard_data.sh
 #Setup Pathing
 export PATH=$PATH:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
 
 
 ###########################################################
 ### Setup Functions - Error checking and logging
 ###########################################################
 
 Setup_Logfile () {
 if [ ! -f ${log_file} ]; then
 	touch ${log_file}
 	if [ $? = 1 ]; then
 		echo "`date` - Unable to write to ${log_file} - re-run script as root"
 		exit 1
 	fi
 else
 	#zero out an existing file
 	echo > ${log_file}
 fi
 TeeMyOutput --outfile ${log_file} --stdboth --append -- "$@"
 VerifyExitCode "Log Setup"
 echo "`date` - Logging initiatilized to ${log_file}"
 }
 
 VerifyExitCode () {
         local EXITCODE=$?
         if [ "$EXITCODE" != "0" ] ; then
         	echo "An error (Exit code $EXITCODE) occured during the last action"
         	echo "$1"
                 exit 1
         fi
 }
 
 TeeMyOutput () {
 
 # Usage:
 # source TeeMyOutput.sh --outfile <file> [--infile <file>] [--stdout|--stderr|--stdboth] [--append] [--exclude <egrep pattern>] -- "$@"
 #   --outfile <file>         the file to tee our output to
 #   --infile <file>          the file to feed ourselves with on stdin
 #   --stdout                 redirect stdout (default)
 #   --stderr                 redirect stderr
 #   --stdboth                redirect both stdout and stderr
 #   --append                 run tee in append mode
 #   --exclude <pattern>      strip matching lines from output; pattern is used with egrep
 #
 # Environment:
 #   SHELLCMD="<shell command>" (ex: bash -x)
 
 if  -n "$TeeMyOutput" ; then
         return 0
 fi
 Me="TeeMyOutput"
 
 # parse parameters
 for ((i = 1; i <= "$#"; i++)); do
         Parm="${!i}"
         case "$Parm" in
                 --outfile) ((i++)); OutFile="${!i}" ;;
                 --infile) ((i++)); InFile="${!i}" ;;
                 --stdout|--stderr|--stdboth) Mode="${!i#--std}" ;;
                 --append) Append=yes ;;
                 --exclude) ((i++)); Exclude="${!i}" ;;
                 --) LastParm="$i"; break ;;
                 *) echo "$Me: Unknown parameter '$Parm'"; exit 1
         esac
 done
 
 if  -z "$OutFile" ; then
         echo "$Me: No outfile"
         exit 1
 fi
 
 if  -z "$LastParm" ; then
         LastParm="$#"
 fi
 
 # original parameters
 for ((i = "$LastParm" + 1; i <= "$#"; i++)); do
         OrigParms=("${OrigParms[@]}" "${!i}")
 done
 
 # construct command components
 case "$Mode" in
         out) OurRedirect=() ;;
         err) OurRedirect=("2>&1" "1>/dev/null") ;;
         both) OurRedirect=("2>&1") ;;
 esac
 
 if  "$Append" == yes ; then
         TeeParm=(-a)
 fi
 
 if  -n "$InFile" ; then
         OurRedirect=("${OurRedirect[@]}" "<$InFile")
 fi
 
 # do our stuff
 export TeeMyOutput=yes
 ExitCodeFile="/tmp/TeeMyOutputExitCode_$$"
 trap "rm -rf '$ExitCodeFile'" EXIT
 
 Run()
 {
         eval exec "${OurRedirect[@]}"
         $SHELLCMD "$0" "${OrigParms[@]}"
         echo $? >"$ExitCodeFile"
 }
 
 if  -z "$Exclude" ; then
         Run | tee "${TeeParm[@]}" "$OutFile"
 else
         Run | grep --line-buffered -v "$Exclude" | tee "${TeeParm[@]}" "$OutFile"
 fi
 
 ExitCode=$(<"$ExitCodeFile")
 exit "$ExitCode"
 exit 1 # just in case
 
 
 }
 
 ###########################################################
 ### Setup Functions - Reference functions
 ###########################################################
 
 Create_Wizard_Data-Double_Nic_Shell () {
 echo "c_deviceType=2 # 1-Core, 2-Hybrid, 3-DiskedMD
 c_netIfaceNo=1
 c_netExtName='{extif}'
 c_netExtIP=
 c_netExtMask=
 c_netExtGateway=
 c_netExtDNS1=
 c_netExtDNS2=
 c_netExtUseDhcp=1 # 1 - Yes / 0 - No
 c_runDhcpServer=1 # 1 - Yes / 0 - No
 c_netIntName='{intif}'
 c_netIntIPN='192.168.80'
 c_startupType=1 #0 - Start Kde / 1 - Start LMCE
 c_installType=1
 c_installMirror='http://archive.ubuntu.com/ubuntu/'
 c_netExtKeep='true'
 c_installUI=0 # 0 - UI1, 1 - UI2M, 2 - UI2A
 c_linuxmceCdFrom=1 # 1 - CD, 2 -ISO
 c_linuxmceCdIsoPath= 
 c_ubuntuExtraCdFrom=1
 c_ubuntuExtraCdPath=
 c_ubuntuLiveCdFrom=1
 c_ubuntuLiveCdPath=
 "
 }
 
 Create_Wizard_Data-Single_Nic_Shell () {
 echo "c_deviceType=2 # 1-Core, 2-Hybrid, 3-DiskedMD
 c_netIfaceNo=1
 c_netExtName='{extif}'
 c_netExtIP='{extip}'
 c_netExtMask='{extMask}'
 c_netExtGateway='{extGW}'
 c_netExtDNS1='{extDNS}'
 c_netExtDNS2=
 c_netExtUseDhcp={extUseDhcp} # 1 - Yes / 0 - No
 c_runDhcpServer={runDhcp} # 1 - Yes / 0 - No
 c_netIntName='{extif}:1'
 c_netIntIPN='192.168.80'
 c_startupType=1 #0 - Start Kde / 1 - Start LMCE
 c_installType=1
 c_installMirror='http://archive.ubuntu.com/ubuntu/'
 c_netExtKeep='true'
 c_installUI=0 # 0 - UI1, 1 - UI2M, 2 - UI2A
 c_linuxmceCdFrom=1 # 1 - CD, 2 -ISO
 c_linuxmceCdIsoPath= 
 c_ubuntuExtraCdFrom=1
 c_ubuntuExtraCdPath=
 c_ubuntuLiveCdFrom=1
 c_ubuntuLiveCdPath=
 c_singleNIC=1
 "
 
 }
 
 AddGpgKeyToKeyring () {
 local gpg_key="$1"
 
 wget -q "$gpg_key" -O- | apt-key add -
 }
 
 
 ###########################################################
 ### Setup Functions - General functions
 ###########################################################
 
 UpdateUpgrade () {
 #perform an update and a dist-upgrade
 echo "Performing an update and an upgrade to all components" > /tmp/messenger
 apt-get -qq update 
 VerifyExitCode "apt-get update"
 apt-get -y -q -f --force-yes upgrade
 VerifyExitCode "dist-upgrade"
 }
 
 TimeUpdate () {
 echo "Synchronizing time with an online server" > /tmp/messenger
 #Update system time to match ntp server
 ntpdate ntp.ubuntu.com
 }
 
 CreateBackupSources () {
 if [ ! -e /etc/apt/sources.list.pbackup ]; then
 	echo "Backing up sources.list file"
 	cp -a /etc/apt/sources.list /etc/apt/sources.list.pbackup
 fi
 }
 
 AddAptRetries () {
 local changed
 if [ -f /etc/apt/apt.conf ]; then
 	if ! grep -q "^[^#]*APT::Acquire { Retries" /etc/apt/apt.conf; then
 		echo 'APT::Acquire { Retries  "20" }'>>/etc/apt/apt.conf
 		changed=0
 	else
 		echo "APT preference on number of retries already set "
 		changed=1
 	fi
 else
 	echo 'APT::Acquire { Retries  "20" }'>>/etc/apt/apt.conf
 fi
 echo "APT preference on number of retries set"
 return $changed
 }
 
 Pre-InstallNeededPackages () {
 echo "Installing necessary prep packages" > /tmp/messenger
 
 #Create local deb-cache dir
 mkdir -p "${LOCAL_REPO_BASE}/${LOCAL_REPO_DIR}"
 
 #Install dpkg-dev and debconf-utils for pre-seed information
 #Install makedev due to mdadm issue later in the install process - logged bug https://bugs.launchpad.net/ubuntu/+source/mdadm/+bug/850213 with ubuntu
 apt-get -y -q install dpkg-dev debconf-utils makedev
 VerifyExitCode "dpkg-dev and debconf-utils"
 
 
 # Disable compcache
 if [ -f /usr/share/initramfs-tools/conf.d/compcache ]; then
 	rm -f /usr/share/initramfs-tools/conf.d/compcache && update-initramfs -u
 fi
 }
 
 CreatePackagesFiles () {
 echo "Creating necessary package files" > /tmp/messenger
 ( cd "${LOCAL_REPO_BASE}"; \
 	dpkg-scanpackages -m "${LOCAL_REPO_DIR}" /dev/null | \
 	tee "${LOCAL_REPO_DIR}/Packages" | \
 	gzip -9c >"${LOCAL_REPO_DIR}/Packages.gz" )
 }
 PreSeed_Prefs () {
 echo "PreSeeding package installation preferences" > /tmp/messenger
 
 #create preseed file
 echo "debconf debconf/frontend	select Noninteractive
 # Choices: critical, high, medium, low
 debconf debconf/priority        select critical
 msttcorefonts   msttcorefonts/http_proxy        string
 msttcorefonts   msttcorefonts/defoma    note
 msttcorefonts   msttcorefonts/dlurl     string
 msttcorefonts   msttcorefonts/savedir   string
 msttcorefonts   msttcorefonts/baddldir  note
 msttcorefonts   msttcorefonts/dldir     string
 msttcorefonts   msttcorefonts/blurb     note
 msttcorefonts   msttcorefonts/accepted-mscorefonts-eula boolean true
 msttcorefonts   msttcorefonts/present-mscorefonts-eula  boolean false
 sun-java6-bin   shared/accepted-sun-dlj-v1-1    boolean true
 sun-java6-jre   shared/accepted-sun-dlj-v1-1    boolean true
 sun-java6-jre   sun-java6-jre/jcepolicy note
 sun-java6-jre   sun-java6-jre/stopthread        boolean true
 man-db		man-db/install-setuid		boolean	false
 debconf debconf/frontend        select  Noninteractive
 # Choices: critical, high, medium, low
 debconf debconf/priority        select  critical
 " > /tmp/preseed.cfg
 
 debconf-set-selections /tmp/preseed.cfg
 VerifyExitCode "debconf-set-selections - preseed data"
 
 #For some odd reason, set-selections adds a space for Noninteractive and Critical that needs to be removed - debconf doesn't handle extra white space well
 sed -i 's/Value:  /Value: /g' /var/cache/debconf/config.dat
 
 #remove preseed file, no need to clutter things up
 rm /tmp/preseed.cfg
 
 #Seeding mythweb preferences to not override the LMCE site on install - for some odd reason, mythweb packages don't accept the set-selections
 touch /etc/default/mythweb
 echo "[cfg]" >> /etc/default/mythweb
 echo "enable = false" >> /etc/default/mythweb
 echo "only = false" >> /etc/default/mythweb
 echo "username = " >> /etc/default/mythweb
 echo "password = " >> /etc/default/mythweb 
 }
 
 Fix_Initrd_Vmlinux () {
 echo "Starting initrd and vmlinuz fix" > /tmp/messenger
 # Fix a problem with the /initrd.img and /vmlinuz links pointing to a different kernel than the 
 # newest (and currently running) one
 LATEST_KERNEL=`ls /lib/modules --sort time --group-directories-first|head -1`
 KERNEL_TO_USE=`uname -r`
 
 if [ -f "/boot/initrd.img-$LATEST_KERNEL" ]; then
 	KERNEL_TO_USE=$LATEST_KERNEL
 fi
 ln -s -f /boot/initrd.img-$KERNEL_TO_USE /initrd.img
 ln -s -f /boot/vmlinuz-$KERNEL_TO_USE /vmlinuz
 }
 
 Nic_Config () {
 echo "Starting NIC Discovery and Configuration" > /tmp/messenger
 # Find out, what nic configuration we have. This is needed for later on to fill the database
 # correctly.
 if   awk '$1 != "Iface" && $1 != "lo" && $1 != "pan0" { print $1 }' | wc -l` > 1 ; then
 	Create_Wizard_Data-Double_Nic_Shell > ${mce_wizard_data_shell}
 	#Use these for the defaults if we cannot automatically determine which to use
 	#TODO: Error out and instruct the user to setup a working connection? Or ask them to manually choose?
 	extif="eth0"
 	intif="eth1"
 	if route -n | grep -q '^0.0.0.0'; then
 		#We have a default route, use it for finding external interface.
 		extif=`route -n | awk '$1 == "0.0.0.0" { print $8 }'`
 		#Use the first available interface as the internal interface.
 		for if in `ifconfig -s -a | awk '$1 != "Iface" && $1 != "lo"  && $1 != "pan0" { print $1 }'`
 		do
 			if [ "$if" != "$extif" ]
 			then
 				intif=$if
 				break
 			fi
 		done
 	fi
 	echo "Using $extif for external interface" > /tmp/messenger
 	echo "Using $intif for internal interface" > /tmp/messenger
 	
 	sed --in-place -e "s,\({extif}\),$extif,g" ${mce_wizard_data_shell}
 	sed --in-place -e "s,\({intif}\),$intif,g" ${mce_wizard_data_shell}
 else
 	extif=eth0
 	if route -n | grep -q '^0.0.0.0'
 			then
 				#We have a default route, use it for finding external interface.
 				extif=`route -n | awk '$1 == "0.0.0.0" { print $8 }'`
 	fi
 	Create_Wizard_Data-Single_Nic_Shell > ${mce_wizard_data_shell}
 	echo "Using $extif for single nic install" > /tmp/messenger
 	sed --in-place -e "s,\({extif}\),$extif,g" ${mce_wizard_data_shell}
 
 			# set c_netExtIP and friends , as this is used in Configure_Network_Options (i.e. before Network_Setup...)
 			extIP=$(ip addr | grep "$extif" | grep -m 1 'inet ' | awk '{print $2}' | cut -d/ -f1)
 			sed --in-place -e "s,\({extip}\),$extIP,g" ${mce_wizard_data_shell}
 
 			# Set use external DHCP and run own dhcp based on extifs current setting
 			ExtUsesDhcp=$(grep "iface $extif " /etc/network/interfaces | grep -cF 'dhcp')
 	if  $ExtUsesDhcp == 0 
 			then
 		   # Not dhcp defined in config file, test if dhclient got us an IP
 		   # /var/run/dhcp3 for newer than 810, /var/run in 810
 		   if [[ (`ls /var/lib/dhcp3/dhclient-*-$extif.lease &&  $? == 0 ` || -e /var/run/dhclient-$extif.pid) && `pgrep -c dhclient` == 1 ]]
 		   then
 			   ExtUsesDhcp=1
 		   fi
 	fi
 			RunDHCP=0
 			if  $ExtUsesDhcp == 0 
 			then
 					echo "$extif does not use DHCP, setting ExtUseDhcp=0 and RunDHCPServer=1 and detecting current network settings" > /tmp/messenger
 					RunDHCP=1
 
 					ExtGateway=$(grep -A 10 "^iface $extif" /etc/network/interfaces | grep '^\s*gateway' -m 1 | grep -o  '[0-9.]*')
 					ExtMask=$(grep -A 10 "^iface $extif" /etc/network/interfaces | grep '^\s*netmask' -m 1 | grep -o '[0-9.]*')
 					ExtDNS=$(grep 'nameserver' /etc/resolv.conf | grep -o '[0-9.]*' -m 1)
 	fi
 			
 	sed --in-place -e "s,\({extMask}\),$ExtMask,g" ${mce_wizard_data_shell}
 	sed --in-place -e "s,\({extGW}\),$ExtGateway,g" ${mce_wizard_data_shell}
 	sed --in-place -e "s,\({extDNS}\),$ExtDNS,g" ${mce_wizard_data_shell}
 
 	sed --in-place -e "s,\({extUseDhcp}\),$ExtUsesDhcp,g" ${mce_wizard_data_shell}
 	sed --in-place -e "s,\({runDhcp}\),$RunDHCP,g" ${mce_wizard_data_shell}
 fi
 
 if [[ ! -r ${mce_wizard_data_shell} ]]; then
         echo "`date` - Wizard Information is corrupted or missing." > /tmp/messenger
 		exit 1
 fi
 . ${mce_wizard_data_shell}
 VerifyExitCode "MCE Wizard Data"
 
 Core_PK_Device="0"
 
 #Setup the network interfaces
 echo > /etc/network/interfaces
 echo "auto lo" >> /etc/network/interfaces
 echo "iface lo inet loopback" >> /etc/network/interfaces
 echo >> /etc/network/interfaces
 echo "auto $c_netExtName" >> /etc/network/interfaces
 if  $c_netExtUseDhcp  == "1"  ;then
 	echo "    iface $c_netExtName inet dhcp" >> /etc/network/interfaces
 else
 	if  "$c_netExtIP" != ""  &&  "$c_netExtName" != ""  &&
 	    "$c_netExtMask" != ""  &&  "$c_netExtGateway" != ""  ;then
 		echo "" >> /etc/network/interfaces
 		echo "    iface $c_netExtName inet static" >> /etc/network/interfaces
 		echo "    address $c_netExtIP" >> /etc/network/interfaces
 		echo "    netmask $c_netExtMask" >> /etc/network/interfaces
 		echo "    gateway $c_netExtGateway" >> /etc/network/interfaces
 	fi
 fi
 echo "" >> /etc/network/interfaces
 echo "auto $c_netIntName" >> /etc/network/interfaces
 echo "    iface $c_netIntName inet static" >> /etc/network/interfaces
 echo "    address $c_netIntIPN" >> /etc/network/interfaces
 echo "    netmask 255.255.255.0" >> /etc/network/interfaces
 }
 
 Setup_Pluto_Conf () {
 echo "Seting Up MCE Configuration file" > /tmp/messenger
 AutostartCore=1
 AutostartMedia=1
 
 case "$DISTRO" in
 "intrepid")
 	# select UI1
 	PK_DISTRO=17
 	;;
 "lucid")
 	# select UI2 without alpha blending
 	PK_DISTRO=18
 	;;
 esac
 
 
 echo "Generating Default Config File" > /tmp/messenger
 PlutoConf="# Pluto config file
 MySqlHost = localhost
 MySqlUser = root
 MySqlPassword =
 MySqlDBName = pluto_main
 DCERouter = localhost
 MySqlPort = 3306
 DCERouterPort = 3450
 PK_Device = 1
 Activation_Code = 1111
 PK_Installation = 1
 PK_Users = 1
 PK_Distro = $PK_DISTRO
 Display = 0
 SharedDesktop = 1
 OfflineMode = false
 #<-mkr_b_videowizard_b->
 UseVideoWizard = 1
 #<-mkr_b_videowizard_e->
 LogLevels = 1,5,7,8
 #ImmediatelyFlushLog = 1
 AutostartCore=$AutostartCore
 AutostartMedia=$AutostartMedia
 "
 echo "$PlutoConf" > /etc/pluto.conf
 
 chmod 777 /etc/pluto.conf &>/dev/null
 }
 
 Setup_NIS () {
 # Put a temporary nis config file that will prevent ypbind to start
 # Temporary NIS setup, disabling NIS server and client.
 echo "Temporarily modifying the NIS configuration file disabling the NIS server and client"
 echo "
 NISSERVER=false
 NISCLIENT=false
 YPPWDDIR=/etc
 YPCHANGEOK=chsh
 NISMASTER=
 YPSERVARGS=
 YPBINDARGS=
 YPPASSWDDARGS=
 YPXFRDARGS=
 " > /etc/default/nis
 }
 
 Create_And_Config_Devices () {
 
 # Create the initial core device using CreateDevice, and the MD for the core in case we create a Hybrid (the default).
 
 #Cycle the mysql server
 #service mysql stop
 #killall -9 mysqld_safe
 #service mysql start &
 
 #sleep to ensure the mysql server is fully started
 sleep 5
 
 #Source the SQL_OPS file
 #. /usr/pluto/bin/SQL_Ops.sh
 
 DEVICE_TEMPLATE_Core=7
 DEVICE_TEMPLATE_MediaDirector=28
 
 
 ## Update some info in the database
 Q="INSERT INTO Installation(Description, ActivationCode) VALUES('Pluto', '1111')"
 RunSQL "$Q"
 
 ## Create the Core device and set it's description
 echo "Setting up your computer to act as a 'Core'" > /tmp/messenger
 apt-get install lmce-asterisk -y
 Core_PK_Device=$(/usr/pluto/bin/CreateDevice -d $DEVICE_TEMPLATE_Core | tee /dev/stderr | tail -1)
 Q="UPDATE Device SET Description='CORE' WHERE PK_Device='$Core_PK_Device'"
 RunSQL "$Q"
 
 #Setup media director with core
 echo "Setting up your computer to act as a 'Media Director'" > /tmp/messenger
 /usr/pluto/bin/CreateDevice -d $DEVICE_TEMPLATE_MediaDirector -C "$Core_PK_Device"
 Hybrid_DT=$(RunSQL "SELECT PK_Device FROM Device WHERE FK_DeviceTemplate='$DEVICE_TEMPLATE_MediaDirector' LIMIT 1")
 Q="UPDATE Device SET Description='The core/hybrid' WHERE PK_Device='$Hybrid_DT'"
 RunSQL "$Q"
 
 ## Set UI interface
 Q="SELECT PK_Device FROM Device WHERE FK_Device_ControlledVia='$Hybrid_DT' AND FK_DeviceTemplate=62"
 OrbiterDevice=$(RunSQL "$Q")
 
 
 echo "Updating Startup Scripts" > /tmp/messenger
 # "DCERouter postinstall"
 /usr/pluto/bin/Update_StartupScrips.sh
 }
 
 Configure_Network_Options () {
 # Updating hosts file and the Device_Data for the core with the internal and external network
 # addresses - uses Initial_DHCP_Config.sh from the pluto-install-scripts package.
 echo "Configuring your internal network" > /tmp/messenger
 #Source the SQL Ops file
 
 ## Setup /etc/hosts
 echo > /etc/hosts
 echo "127.0.0.1 localhost.localdomain localhost" >> /etc/hosts
 echo "$c_netExtIP dcerouter $(/bin/hostname)"    >> /etc/hosts
 
 error=false
 Network=""
 Digits_Count=0
 
 for Digits in $(echo "$c_netIntIPN" | tr '.' ' ') ;do
 	[[ "$Digits" == *[^0-9]* ]]            && error=true
 	| $Digits -gt 255  && error=true
 
 	if  "$Network" == ""  ;then
 		Network="$Digits"
 	else
 		Network="${Network}.${Digits}"
 	fi
 
 	Digits_Count=$(( $Digits_Count + 1 ))
 done
 | $Digits_Count -gt 3  && error=true
 
 if  "$error" == "true"  ;then
 	Network="192.168.80"
 	Digits_Count="3"
 fi
 
 IntIP="$Network"
 IntNetmask=""
 for i in `seq 1 $Digits_Count` ;do
 	if  "$IntNetmask" == ""  ;then
 		IntNetmask="255"
 	else
 		IntNetmask="${IntNetmask}.255"
 	fi
 done
 for i in `seq $Digits_Count 3` ;do
 	if  $i == "3"  ;then
 		IntIP="${IntIP}.1"
 	else
 		IntIP="${IntIP}.0"
 	fi
 
 	IntNetmask="${IntNetmask}.0"
 done
 
 if  "$c_netIntName" == ""  ;then
 	IntIf="$c_netExtName:0"
 else
 	IntIf="$c_netIntName"
 fi
 
 if  "$c_singleNIC" == "1"  ;then
 			#Disable firewalls on single NIC operation, refs #396
 			echo "We are in single NIC mode -> internal firewalls disabled"
 			echo "DisableFirewall=1" >>/etc/pluto.conf
 			echo "DisableIPv6Firewall=1" >>/etc/pluto.conf
 fi
 
 if  "$c_netExtUseDhcp" == "0"  ;then
 	NETsetting="$c_netExtName,$c_netExtIP,$c_netExtMask,$c_netExtGateway,$c_netExtDNS1|$IntIf,$IntIP,$IntNetmask"
 else
 	NETsetting="$c_netExtName,dhcp|$IntIf,$IntIP,$IntNetmask"
 fi
 
 DHCPsetting=$(/usr/pluto/install/Initial_DHCP_Config.sh "$Network" "$Digits_Count")
 
 Q="REPLACE INTO Device_DeviceData(FK_Device,FK_DeviceData,IK_DeviceData) VALUES('$Core_PK_Device',32,'$NETsetting')"
 RunSQL "$Q"
 if  "$c_runDhcpServer" == "1" ; then
 	Q="REPLACE INTO Device_DeviceData(FK_Device, FK_DeviceData, IK_DeviceData)
 		VALUES($Core_PK_Device, 28, '$DHCPsetting')"
 	RunSQL "$Q"
 fi
 # create empty IPv6 tunnel settings field
 	Q="REPLACE INTO Device_DeviceData(FK_Device,FK_DeviceData,IK_DeviceData) VALUES('$Core_PK_Device',292,)"
 	RunSQL "$Q"
 }
 
 VideoDriverSetup () {
 echo "Starting video driver setup" > /tmp/messenger
 
 touch /etc/X11/xorg.conf
 
 ## Install driver based on the type of video card used
 if lshwd | grep -qi 'VGA .* (nv)'; then
 		. /usr/pluto/bin/nvidia-install.sh
 		installCorrectNvidiaDriver
 fi
 }
 
 addAdditionalTTYStart () {
 if  "$DISTRO" = "lucid"  ; then
 	sed -i 's/23/235/' /etc/init/tty2.conf
 	sed -i 's/23/235/' /etc/init/tty3.conf
 	sed -i 's/23/235/' /etc/init/tty4.conf
 	# disable plymouth splash for now. Could be replaced by own LMCE splash later
 	sed -i 's/ splash//' /etc/default/grub
 	#Setup vmalloc for video drivers
 	sed -i 's/GRUB_CMDLINE_LINUX=\"\"/GRUB_CMDLINE_LINUX=\"vmalloc=256m\"/' /etc/default/grub
 	/usr/sbin/update-grub
 else
 	echo "start on runlevel 5">>/etc/event.d/tty2
 	echo "start on runlevel 5">>/etc/event.d/tty3
 	echo "start on runlevel 5">>/etc/event.d/tty4
 fi
 }
 
 TempEMIFix () {
 #Until the new id-my-disc package is implemented, this will allow the external_media_identifier to launch
 ln -s /usr/lib/libdvdread.so.4 /usr/lib/libdvdread.so.3
 }
 
 ReCreatePackagesFiles () {
 echo "Creating necessary package files" > /tmp/messenger
 pushd /usr/pluto/deb-cache
 dpkg-scanpackages -m . /dev/null | tee Packages | gzip -c > Packages.gz
 popd
 }
 
 SetupNetworking () {
 rm -f /etc/X11/xorg.conf
 rm -f /etc/network/interfaces
 
 ## Reconfigure networking
 /usr/pluto/bin/Network_Setup.sh
 /etc/init.d/networking restart
 /usr/pluto/bin/DHCP_config.sh
 /etc/init.d/networking restart
 /usr/pluto/bin/Network_Firewall.sh
 /usr/pluto/bin/ConfirmInstallation.sh
 /usr/pluto/bin/Timezone_Detect.sh
 }
 
 CleanInstallSteps () {
 if  -f /etc/pluto/install_cleandb ; then
 
         # on upgrade, the old keys are already in place, so keep them
         rm -f /etc/ssh/ssh_host_*
         dpkg-reconfigure -pcritical openssh-server
 
         PostInstPkg=(
         pluto-local-database pluto-media-database pluto-security-database pluto-system-database
         pluto-telecom-database lmce-asterisk
         )
 
         for Pkg in "${PostInstPkg[@]}"; do
                 /var/lib/dpkg/info/"$Pkg".postinst configure
         done
 
         # Mark remote assistance as diabled
         ConfDel remote
 
         arch=$(apt-config dump | grep 'APT::Architecture' | sed 's/APT::Architecture.*"\(.*\)".*/\1/g')
 
         Queries=(
                 "UPDATE Device_DeviceData
                         SET IK_DeviceData=15
                         WHERE PK_Device IN (
                                         SELECT PK_Device FROM Device WHERE FK_DeviceTemplate IN (7, 28)
                                 )
                                 AND FK_DeviceData=7
                 "
                 "UPDATE Device_DeviceData SET IK_DeviceData='LMCE_CORE_u0804_$arch' WHERE IK_DeviceData='LMCE_CORE_1_1'"
                 "UPDATE Device_DeviceData SET IK_DeviceData='LMCE_MD_u0804_i386'   WHERE IK_DeviceData='LMCE_MD_1_1'"
                 "UPDATE Device_DeviceData SET IK_DeviceData='0' WHERE FK_DeviceData='234'"
                 "UPDATE Device_DeviceData SET IK_DeviceData='i386' WHERE FK_DeviceData='112' AND IK_DeviceData='686'"
          )
 
         for Q in "${Queries[@]}"; do
                 RunSQL "$Q"
         done
 
         DT_DiskDrive=11
         DiskDrives=$(RunSQL "SELECT PK_Device FROM Device WHERE FK_DeviceTemplate='$DT_DiskDrive'")
         for DiskDrive in $DiskDrives ;do
                 DiskDrive_DeviceID=$(Field 1 "$DiskDrive")
                 for table in 'CommandGroup_Command' 'Device_Command' 'Device_CommandGroup' 'Device_DeviceData' 'Device_DeviceGroup' 'Device_Device_Related' 'Device_EntertainArea' 'Device_HouseMode' 'Device_Orbiter' 'Device_StartupScript' 'Device_Users' ;do
                         RunSQL "DELETE FROM \\`$table\\` WHERE FK_DeviceID = '$DiskDrive_DeviceID' LIMIT 1"
                 done
 
                 RunSQL "DELETE FROM Device WHERE PK_Device = '$DiskDrive_DeviceID' LIMIT 1"
         done
 fi
 }
 
 CreateDisklessImage () {
 echo "Building a disk image for your Diskless Media Directors" > /tmp/messenger
 local diskless_log=/var/log/pluto/Diskless_Create-`date +"%F"`.log
 nohup /usr/pluto/bin/Diskless_CreateTBZ.sh >> ${diskless_log} 2>&1 &
 }
 
 VideoDriverLive () {
 	## Install driver based on the type of video card used
 	if lshwd | grep -qi 'VGA .* (nv)'; then
 	        apt-get -y -f install xserver-xorg-nouveau-video
 	elif lshwd | grep -qi 'VGA .* (radeon)'; then
 	        # Check to see if old Radeon card, if so, do not install new driver
 	        if ! lshwd | grep -Pqi 'VGA .*Radeon ((9|X|ES)(1|2?)([0-9])(5|0)0|Xpress) (.*) \(radeon\)'; then
 	               apt-get -y -f install xorg-driver-fglrx
 	        fi
 	fi
 }
 
 
 
 InitialBootPrep () {
 echo "Preparing initial reboot" > /tmp/messenger
 
 #Setup Runlevel 3
 rm -rf /etc/rc3.d/*
 cp -a /etc/rc2.d/* /etc/rc3.d/
 ln -sf /etc/init.d/linuxmce /etc/rc5.d/S99linuxmce
 rm -f /etc/rc3.d/S99kdm /etc/rc3.d/S990start_avwizard
 
 #Setup Runlevel 4
 rm -rf /etc/rc4.d/*
 cp -a /etc/rc2.d/* /etc/rc4.d/
 ln -sf /etc/init.d/linuxmce /etc/rc5.d/S99linuxmce
 
 #Setup Runlevel 5
 rm -rf /etc/rc5.d/*
 cp -a /etc/rc2.d/* /etc/rc5.d/
 ln -sf /etc/init.d/linuxmce /etc/rc5.d/S99linuxmce
 
 #Create inittab config
 cat >/etc/inittab <<"EOF"
 # WARNING: Do NOT set the default runlevel to 0 (shutdown) or 6 (reboot).
 #id:2:initdefault: # KDE
 #id:3:initdefault: # Core
 #id:4:initdefault: # Core + KDE
 id:5:initdefault: # Launch Manager
 EOF
 
 
 
 # Remove KDM startup
 echo "/bin/false" >/etc/X11/default-display-manager
 cp /usr/pluto/bin/firstboot /etc/rc5.d/S90firstboot
 chmod 755 /etc/rc5.d/S90firstboot
 echo >> /etc/apt/sources.list
 /usr/share/update-notifier/notify-reboot-required
 }
 
 ###########################################################
 ### If running the LIVE dvd boot
 ###########################################################
 
 liveboot=$(ps aux | grep ubiquity | wc -l)
    if [ `whoami` == ubuntu ] && [ "$liveboot" -lt "2" ]; then 
       ConfSet AVWizardDone 1
       mv /root/new-installer/lmcemaster/runners/* /etc/init.d
       Nic_Config
       pinger
       gpgUpdate
       TimeUpdate
       Pre-InstallNeededPackages
       CreatePackagesFiles
       PreSeed_Prefs
       Fix_Initrd_Vmlinux
       Setup_Pluto_Conf
       Setup_NIS
       Create_And_Config_Devices
       Configure_Network_Options
       UpdateUpgrade
       VideoDriverSetup
       addAdditionalTTYStart
       TempEMIFix
       InitialBootPrep
       /etc/init.d/networking restart
       sleep 3
          if lspci | grep -qi 'vga' | grep -qi 'nvidia'; then 
             sed 's/nvidia/nouveau/g' /etc/X11/xorg.conf
             sed 's/nvidia/nouveau/g' /etc/X11/xorg.conf.pluto
             sed 's/nv/nouveau/g' /etc/X11/xorg.conf
             sed 's/nv/nouveau/g' /etc/X11/xorg.conf.pluto
          fi  
       ConfSet AVWizardDone 0
       ConfSet AVWizardOverride 1
       echo "Starting firstboot script" > /tmp/messenger
       ReCreatePackagesFiles
       SetupNetworking
       CleanInstallSteps
       #CreateDisklessImage
       VideoDriverLive
       echo "Firstboot Script Complete"
       echo ""
       echo ""
       echo ""
       echo "/bin/false" > /etc/X11/default-display-manager
       sleep 2
       /usr/pluto/bin/AVWizard_Run.sh
       /etc/init.d/linuxmce
    fi




firstboot

 #!/bin/bash
 ###########################################################
 ### Setup global variables
 ###########################################################
 LogFile="/var/log/pluto/firstboot.log"
 trap 'rm -f /etc/rc5.d/S90firstboot' EXIT
 
 
 ###########################################################
 ### Setup Functions - Error checking and logging
 ###########################################################
 
 Setup_Logfile () {
 if [ -f ${log_file} ]; then
         touch ${log_file}
         if [ $? = 1 ]; then
                 echo "`date` - Unable to write to ${log_file} - re-run script as root"
                 exit 1
         else
                 echo "`date` - Logging initiatilized to ${log_file}"
         fi
 else
         #0 out an existing file
         echo > ${log_file}
         echo "`date` - Setup has run before, clearing old log file at ${log_file}"
 fi
 }
 
 VerifyExitCode () {
         local EXITCODE=$?
         if [ "$EXITCODE" != "0" ] ; then
                 echo "An error (Exit code $EXITCODE) occured during the last action"
                 echo "$1"
                 exit 1
         fi
 }
 
 StatsMessage () {
         printf "`date` - $* \n"
 }
 
 ###########################################################
 ### Setup Functions - General functions
 ###########################################################
 
 ReCreatePackagesFiles () {
 StatsMessage "Creating necessary package files"
 pushd /usr/pluto/deb-cache
 dpkg-scanpackages -m . /dev/null | tee Packages | gzip -c > Packages.gz
 popd
 }
 
 SetupNetworking () {
 rm -f /etc/X11/xorg.conf
 rm -f /etc/network/interfaces
 
 ## Reconfigure networking
 /usr/pluto/bin/Network_Setup.sh
 /etc/init.d/networking restart
 /usr/pluto/bin/DHCP_config.sh
 /etc/init.d/networking restart
 /usr/pluto/bin/Network_Firewall.sh
 /usr/pluto/bin/ConfirmInstallation.sh
 /usr/pluto/bin/Timezone_Detect.sh
 
 }
 
 CleanInstallSteps () {
 
 if  -f /etc/pluto/install_cleandb ; then
 
         # on upgrade, the old keys are already in place, so keep them
         rm -f /etc/ssh/ssh_host_*
         dpkg-reconfigure -pcritical openssh-server
 
         PostInstPkg=(
         pluto-local-database pluto-media-database pluto-security-database pluto-system-database
         pluto-telecom-database lmce-asterisk
         )
 
         for Pkg in "${PostInstPkg[@]}"; do
                 /var/lib/dpkg/info/"$Pkg".postinst configure
         done
 
         . /usr/pluto/bin/SQL_Ops.sh
         . /usr/pluto/bin/Config_Ops.sh
 
         # Mark remote assistance as diabled
         ConfDel remote
 
         arch=$(apt-config dump | grep 'APT::Architecture' | sed 's/APT::Architecture.*"\(.*\)".*/\1/g')
 
         Queries=(
                 "UPDATE Device_DeviceData
                         SET IK_DeviceData=15
                         WHERE PK_Device IN (
                                         SELECT PK_Device FROM Device WHERE FK_DeviceTemplate IN (7, 28)
                                 )
                                 AND FK_DeviceData=7
                 "
                 "UPDATE Device_DeviceData SET IK_DeviceData='LMCE_CORE_u0804_$arch' WHERE IK_DeviceData='LMCE_CORE_1_1'"
                 "UPDATE Device_DeviceData SET IK_DeviceData='LMCE_MD_u0804_i386'   WHERE IK_DeviceData='LMCE_MD_1_1'"
                 "UPDATE Device_DeviceData SET IK_DeviceData='0' WHERE FK_DeviceData='234'"
                 "UPDATE Device_DeviceData SET IK_DeviceData='i386' WHERE FK_DeviceData='112' AND IK_DeviceData='686'"
          )
 
         for Q in "${Queries[@]}"; do
                 RunSQL "$Q"
         done
 
         DT_DiskDrive=11
         DiskDrives=$(RunSQL "SELECT PK_Device FROM Device WHERE FK_DeviceTemplate='$DT_DiskDrive'")
         for DiskDrive in $DiskDrives ;do
                 DiskDrive_DeviceID=$(Field 1 "$DiskDrive")
                 for table in 'CommandGroup_Command' 'Device_Command' 'Device_CommandGroup' 'Device_DeviceData' 'Device_DeviceGroup' 'Device_Device_Related' 'Device_EntertainArea' 'Device_HouseMode' 'Device_Orbiter' 'Device_StartupScript' 'Device_Users' ;do
                         RunSQL "DELETE FROM \`$table\` WHERE FK_DeviceID = '$DiskDrive_DeviceID' LIMIT 1"
                 done
 
                 RunSQL "DELETE FROM Device WHERE PK_Device = '$DiskDrive_DeviceID' LIMIT 1"
         done
 fi
 }
 
 CreateDisklessImage () {
 StatsMessage "Building a disk image for your Diskless Media Directors"
 local diskless_log=/var/log/pluto/Diskless_Create-`date +"%F"`.log
 nohup /usr/pluto/bin/Diskless_CreateTBZ.sh >> ${diskless_log} 2>&1 &
 }
 
 VideoDriver () {
 ## Install driver based on the type of video card used
 if lshwd | grep -qi 'VGA .* (nv)'; then
         apt-get -y -f install pluto-nvidia-video-drivers
                 VerifyExitCode "Install Pluto nVidia Driver"
 elif lshwd | grep -qi 'VGA .* (radeon)'; then
         # Check to see if old Radeon card, if so, do not install new driver
         if ! lshwd | grep -Pqi 'VGA .*Radeon ((9|X|ES)(1|2?)([0-9])(5|0)0|Xpress) (.*) \(radeon\)'; then
                apt-get -y -f install xorg-driver-fglrx
                            VerifyExitCode "Install Radeon Driver"
         fi
 fi
 }
 
 ###########################################################
 ### Main execution area
 ###########################################################
 
 #Setup logging
 . /usr/pluto/bin/TeeMyOutput.sh --outfile "$LogFile" --stdboth --append -- "$@"
 
 StatsMessage "Starting firstboot script"
 ReCreatePackagesFiles
 SetupNetworking
 CleanInstallSteps
 #CreateDisklessImage
 VideoDriver
 StatsMessage "Firstboot Script Complete"
 reboot



GeneralFunctions.sh

 #!/bin/bash
 
 # Colors and bolds messages
 # '\E begin escape sequence
 # [XX; is the text color
 # XXm' is the background color
 # \033 is the an escape
 # [1m bold     [0m unbold
 # "" around text    around color
 # COLOR         FOREGROUND      BACKGROUND
 # black         30              40
 # red           31              41
 # green         32              42
 # yellow        33              43
 # blue          34              44
 # magenta       35              45
 # cyan          36              46
 # white         37              47
 
 StatusMessage () { 
 echo -e '\E[33;40m'"\033[1m  $* \033[0m" 
 }
 ErrorMessage () { 
 echo -e '\E[33;41m'"\033[1m  $* \033[0m" 
 }
 NotifyMessage () {
 echo -e '\E[32;40m'"\033[1m  $* \033[0m" 
 }
 
 # Looks for a ping reply. Without one restarts networking. Occasionally helpful
 pinger () {
 
 while ! ping -c 1 google.com > /dev/null 2>&1; do /etc/init.d/networking restart; sleep 3; done
 }
 
 # This does an update, while adding gpg keys for any that are missing. This is primarily for medibuntu
 # but will work for any source.
 gpgUpdate () {
 sed -i 's/#deb/deb/g' /etc/apt/sources.list
 gpgs=$(apt-get update |& grep -s NO_PUBKEY | awk '{ print $NF }' | cut -c 9-16); if [ -n $gpgs ]
 then for gpg in $gpgs; do gpg --keyserver pgp.mit.edu --recv-keys $gpg
 gpg --export --armor $gpg | apt-key add -
 done 
 apt-get update
 fi
 }
 
 confirmRoot () {
 testroot="`whoami`"
 if [ "$testroot" != "root" ]; then
    ErrorMessage "Need to be root to run. Exiting"
    exit 1
 fi
 }


image.sh

 #!/bin/bash
 #
 # Create an image which can be dd'ed onto
 # a harddisk, and, after adding a boot loader
 # using grub, be ready for consumption.
 #
 set -e 
 
 IMAGEFILE=`tempfile -p 1004`
 dd if=/dev/zero of=$IMAGEFILE count=4 bs=1GB
 mkfs.ext2 -F $IMAGEFILE
 TEMPDIR=`mktemp -d 1004-dir.XXXXXXXXXX`
 mount -o loop $IMAGEFILE $TEMPDIR
 debootstrap --arch=i386 --include=mysql-server,rsync lucid $TEMPDIR
 echo dcerouter > $TEMPDIR/etc/hostname
 LC_ALL=C chroot $TEMPDIR mkdir -p /var/run/network /lib/plymouth/themes
 cat <<EOF > $TEMPDIR/etc/apt/sources.list
 deb http://deb.linuxmce.org/ubuntu/ lucid  beta2 
 deb http://deb.linuxmce.org/ubuntu/ 20dev_ubuntu  main
 #deb http://packages.medibuntu.org/ lucid free non-free
 EOF
 
 cat <<EOF > $TEMPDIR/etc/apt/sources.list.d/ubuntu.org
 deb mirror://mirrors.ubuntu.com/mirrors.txt lucid main restricted universe multiverse
 deb mirror://mirrors.ubuntu.com/mirrors.txt lucid-updates main restricted universe multiverse
 deb mirror://mirrors.ubuntu.com/mirrors.txt lucid-security main restricted universe multiverse
 deb http://debian.slimdevices.com/ stable  main 
 EOF
 
 cat <<EOF >$TEMPDIR/etc/apt/sources.list.d/fluffy.list
 deb http://127.0.0.1/builder-lucid/ ./ 
 deb ftp://mirror.hetzner.de/ubuntu/packages lucid main restricted universe multiverse
 deb ftp://mirror.hetzner.de/ubuntu/packages lucid-updates main restricted universe multiverse
 deb ftp://mirror.hetzner.de/ubuntu/security lucid-security main restricted universe multiverse
 EOF
 
 #create preseed file
 cat <<EOF | LC_ALL=C chroot $TEMPDIR debconf-set-selections
 debconf debconf/frontend  select Noninteractive
 # Choices: critical, high, medium, low
 debconf debconf/priority        select critical
 msttcorefonts   msttcorefonts/http_proxy        string
 msttcorefonts   msttcorefonts/defoma    note
 msttcorefonts   msttcorefonts/dlurl     string
 msttcorefonts   msttcorefonts/savedir   string
 msttcorefonts   msttcorefonts/baddldir  note
 msttcorefonts   msttcorefonts/dldir     string
 msttcorefonts   msttcorefonts/blurb     note
 msttcorefonts   msttcorefonts/accepted-mscorefonts-eula boolean true
 msttcorefonts   msttcorefonts/present-mscorefonts-eula  boolean false
 sun-java6-bin   shared/accepted-sun-dlj-v1-1    boolean true
 sun-java6-jre   shared/accepted-sun-dlj-v1-1    boolean true
 sun-java6-jre   sun-java6-jre/jcepolicy note
 sun-java6-jre   sun-java6-jre/stopthread        boolean true
 man-db		man-db/install-setuid		boolean	false
 EOF
 
 mv $TEMPDIR/usr/sbin/invoke-rc.d $TEMPDIR/usr/sbin/invoke-rc.d.orig
 
 cat <<EOF > $TEMPDIR/usr/sbin/invoke-rc.d
 #!/bin/bash
 exit 0
 EOF
 chmod +x $TEMPDIR/usr/sbin/invoke-rc.d
 
 
 mount -o bind /dev $TEMPDIR/dev
 mount -t proc none $TEMPDIR/proc
 mount -t devpts none $TEMPDIR/dev/pts
 
 LC_ALL=C chroot $TEMPDIR apt-get update
 LC_ALL=C chroot $TEMPDIR apt-get dist-upgrade -y --allow-unauthenticated
 LC_ALL=C chroot $TEMPDIR apt-get install linux-image-generic libc-dev-bin linux-libc-dev libc6-dev linux-headers-generic manpages-dev screen -y
 LC_ALL=C chroot $TEMPDIR apt-get clean
 
 cat <<EOF > $TEMPDIR/usr/sbin/invoke-rc.d
 #!/bin/bash
 exit 0
 EOF
 chmod +x $TEMPDIR/usr/sbin/invoke-rc.d
 
 mv $TEMPDIR/usr/bin/screen $TEMPDIR/usr/bin/screen.orig
 
 cat <<EOF > $TEMPDIR/usr/bin/screen
 #!/bin/bash
 exit 0
 EOF
 chmod +x $TEMPDIR/usr/bin/screen
 mysqldPID=`LC_ALL=C chroot $TEMPDIR mysqld --skip-networking&`
 echo MySQL PID: $mysqldPID
 chmod 755 $TEMPDIR/var/lib/mysql
 
 LC_ALL=C chroot $TEMPDIR apt-get install lmce-hybrid -y --allow-unauthenticated
 LC_ALL=C chroot $TEMPDIR apt-get clean
 
 # Add the minimal KDE meta package, which will also install Xorg.
 LC_ALL=C chroot $TEMPDIR apt-get install kde-minimal -y --allow-unauthenticated
 LC_ALL=C chroot $TEMPDIR apt-get clean
 
 # 
 LC_ALL=C chroot $TEMPDIR apt-get install pluto-x-scripts pluto-orbiter -y --allow-unauthenticated
 LC_ALL=C chroot $TEMPDIR apt-get clean
 
 # Asterisk stuff
 LC_ALL=C chroot $TEMPDIR apt-get install lmce-asterisk -y --allow-unauthenticated
 LC_ALL=C chroot $TEMPDIR apt-get clean
 
 # Additional stuff wanted by l3top
 LC_ALL=C chroot $TEMPDIR apt-get install ubuntu-standard casper lupin-casper discover1 laptop-detect os-prober linux-generic grub2 plymouth-x11 ubiquity-frontend-kde initramfs-tools -y --allow-unauthenticated
 LC_ALL=C chroot $TEMPDIR apt-get clean
 
 rm $TEMPDIR/usr/sbin/invoke-rc.d
 mv $TEMPDIR/usr/sbin/invoke-rc.d.orig $TEMPDIR/usr/sbin/invoke-rc.d
 
 rm $TEMPDIR/usr/bin/screen
 mv $TEMPDIR/usr/bin/screen.orig $TEMPDIR/usr/bin/screen
 
 # We now have the problem, that Pluto/LinuxMCEs startup scripts get executed WITHOUT the
 # use of invoke-rc.d - instead, they use screen.
 # 
 
 umount $TEMPDIR/dev/pts
 umount $TEMPDIR/proc
 kill `lsof $TEMPDIR|grep mysqld|cut -d" " -f3|sort -u` || :
 sleep 3 
 # kill $mysqldPID || :
 umount $TEMPDIR/dev
 
 # Show the current usage
 du -h --max-depth=1 $TEMPDIR |& grep -v "du: cannot access"
 
 # Get rid of existing network assignments
 rm -f  $TEMPDIR/etc/udev/rules.d/70-persistent-net-rules
 # Remove fluffy and our providers Ubuntu mirror from the sources.list
 rm -f $TEMPDIR/etc/apt/sources.list.d/fluffy.list
 
 # and no longer use the local ubuntu mirror.
 cat $TEMPDIR/etc/apt/sources.list.d/ubuntu.org >> $TEMPDIR/etc/apt/sources.list
 # Make sure fluffy is not in the list of available repositories
 LC_ALL=C chroot $TEMPDIR apt-get update
 
 # Clean up debconf back to dialog
 echo debconf debconf/frontend select Dialog | LC_ALL=C chroot $TEMPDIR debconf-set-selections 
 
 # Let's unmount everything, and run fsck to make sure the image 
 # is nice and clean.
 
 umount $TEMPDIR
 fsck.ext2 $IMAGEFILE
Retrieved from "http://wiki.linuxmce.org/index.php?title=Live_DVD&oldid=29641"